On Sat, May 29, 2010 at 11:51:37AM +0200, philo wrote:
> i do your recommandations, but i don't find "Busid" to xorg.conf.
BusID "PCI:1:2:0"
in the "Device" section, but I don't have it in my xorg.conf
anymore.
> usrv-raptor:/# lspci -v
>
> 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
> 215GP (rev 5c) (prog-if 00 [VGA controller])
> Flags: stepping, medium devsel, IRQ 13
> Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
> I/O ports at fffffe0100000000 [disabled] [size=1]
> Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
> Expansion ROM at fffffe0100000000 [disabled] [size=1]
> Kernel driver in use: atyfb
Exactly the same as mine.
>> $ lspci -v
>> 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
>> 215GP (rev 5c) (prog-if 00 [VGA controller])
>> Flags: stepping, medium devsel, IRQ 13
>> Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
>> I/O ports at fffffe0100000000 [disabled] [size=1]
>> Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
>> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
>> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
>> [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1]
>> Expansion ROM at fffffe0100000000 [disabled] [size=1]
>> Kernel driver in use: atyfb
> have you tell about reference_clock ??
>
> #Option "reference_clock" "29.5 MHz"
>
> The ati chipset on the ultra 5, sometimes need to have their
> regerence_clock manually entered in. Your Ultra 5 could require one of
> the following options
>
> Option "reference_clock" "14.318 MHz"
> Option "reference_clock" "28.636 MHz"
> Option "reference_clock" "29.5 MHz"
>
> For my Ultra 5 it used the 14.318 MHz option. So if one does not work,
> try another one.
I don't have that in my xorg.conf and never did.
$ Xorg -version
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27.2-dsa-usii sparc Debian
Current Operating System: Linux ultra5 2.6.30-1-sparc64 #1 Wed Jul 8
01:18:17 UTC 2009 sparc
Build Date: 14 May 2009 04:50:27PM
xorg-server 2:1.6.1.901-2 (bui...@spontini)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
With this version of Xorg, X doesn't work here without an xorg.conf,
but it DOES WORK at low resolution (640x480?) with a zero-length
xorg.conf. I get better resolution when I put my monitor specs and
default depth of 16 in xorg.conf.
>> This minimal xorg.conf works for me with an old 15" SVGA monitor.
>>
>> $ cat /etc/X11/xorg.conf
>> Section "Device"
>> Identifier "Generic Video Card"
>> Option "UseFBDev" "true"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Generic Monitor"
>> Option "DPMS"
>> # IBM
>> HorizSync 31.5-51
>> VertRefresh 43-60
>> EndSection
>>
>> Section "Screen"
>> Identifier "Default Screen"
>> Device "Generic Video Card"
>> Monitor "Generic Monitor"
>> DefaultDepth 16
>> EndSection
>>
>> Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen "Default Screen"
>> EndSection
Regards,
Howard E.
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]
