I have manually configured silo.conf file.continued without bootloader
lqqqqqqqqqqqqqqqqqu [!] Continue without boot loader tqqqqqqqqqqqqqqqqqqk x x lx No boot loader installed x xx No boot loader has been installed, either because you chose not to or x xx because your specific architecture doesn't support a boot loader yet. x xx x xx You will need to boot manually with the /vmlinuz kernel on partition x xx /dev/sda1 and root=/dev/sda2 passed as a kernel argument. x mx x x <Continue> x x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj <Tab> moves; <Space> selects; <Enter> activates buttons Given root=/dev/sda2 and /boot/vmlinuz as boot arguments.But still the problem is not resolved after the last step i.e. *kthreadd+0xe0/0x124* *Thank you..* On Sat, Jul 12, 2014 at 2:53 AM, shyam prasad <[email protected]> wrote: > Dear team, > > > Im using serial console only,no monitor ,no keyboard are connected to it. > After giving console=ttyS0 in boot command it is working fine but still > getting problem as shown below.. > > > > > Sun Fire V890, No Keyboard > Copyright 2006 Sun Microsystems, Inc. All rights reserved. > OpenBoot 4.22.24, 8192 MB memory installed, Serial #72026096. > Ethernet address 0:14:4f:4b:7:f0, Host ID: 844b07f0. > > > > > > Running diagnostic script obdiag/normal > > Testing /pci@8,600000/network@1 > Testing /pci@8,600000/SUNW,qlc@2 > Testing /pci@9,700000/ebus@1/i2c@1,2e > Testing /pci@9,700000/ebus@1/i2c@1,30 > Testing /pci@9,700000/ebus@1/i2c@1,50002e > Testing /pci@9,700000/ebus@1/i2c@1,500030 > Testing /pci@9,700000/ebus@1/bbc@1,0 > Testing /pci@9,700000/ebus@1/bbc@1,500000 > Testing /pci@8,700000/ide@1 > Testing /pci@9,700000/network@1,1 > Testing /pci@9,700000/usb@1,3 > Testing /pci@9,700000/ebus@1/gpio@1,300600 > Testing /pci@9,700000/ebus@1/pmc@1,300700 > Testing /pci@9,700000/ebus@1/rtc@1,300070 > > > > > {2} ok > {2} ok > {2} ok *boot disk /boot/vmlinuz root=/dev/sda2 console=ttyS0* > Resetting ... > > > > Enabling system bus....... Done > Initializing CPUs......... Done > Initializing boot memory.. Done > Initializing OpenBoot > Probing system devices > ChassisSerialNumber 0638AM1097 > Probing I/O buses > screen not found. > keyboard not found. > Keyboard not present. Using ttya for input and output. > Probing system devices > ChassisSerialNumber 0638AM1097 > Probing I/O buses > > > Sun Fire V890, No Keyboard > Copyright 2006 Sun Microsystems, Inc. All rights reserved. > OpenBoot 4.22.24, 8192 MB memory installed, Serial #72026096. > Ethernet address 0:14:4f:4b:7:f0, Host ID: 844b07f0. > > > > > > Rebooting with command: boot disk /boot/vmlinuz root=/dev/sda2 > console=ttyS0 > Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0 File and args: > /boot/vmlinuz root=/dev/sda2 console=ttyS0 video=atyfb:off fb=false > SILO Version 1.4.14 > > > Allocated 64 Megs of memory at 0x40000000 for kernel > Uncompressing image... > Loaded kernel version 3.2.57 > > [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.24 2006/12/08 10:07' > [ 0.000000] PROMLIB: Root node compatible: > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 3.2.0-4-sparc64-smp ( > [email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 > SMP Debian 3.2.57-3 > [ 0.000000] bootconsole [earlyprom0] enabled > [ 0.000000] ARCH: SUN4U > [ 0.000000] Ethernet address: 00:14:4f:4b:07:f0 > [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image. > [ 0.000000] Remapping the kernel... done. > [ 0.000000] OF stdout device is: /pci@9,700000/ebus@1/serial@1,400000:a > [ 0.000000] PROM: Built device tree with 117446 bytes of memory. > > [ 0.000000] Top of RAM: 0xa1ffb14000, Total RAM: 0x1ffb02000 > [ 0.000000] Memory hole size: 655360MB > [ 0.000000] Zone PFN ranges: > [ 0.000000] Normal 0x05000000 -> 0x050ffd8a > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x05000000 -> 0x050ff7ff > [ 0.000000] 0: 0x050ff800 -> 0x050ffd73 > [ 0.000000] 0: 0x050ffd7b -> 0x050ffd8a > [ 0.000000] Booting Linux... > [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32] > [ 0.000000] CPU CAPS: [v8plus,popc,vis,vis2] > [ 0.000000] PERCPU: Embedded 6 pages/cpu @fffff8a004c00000 s20416 r8192 > d20544 u1048576 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 1039749 > [ 0.000000] Kernel command line: root=/dev/sda2 console=ttyS0 > video=atyfb:off fb=false > > [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes) > [ 0.000000] Dentry cache hash table entries: 1048576 (order: 10, > 8388608 bytes) > [ 0.000000] Inode-cache hash table entries: 524288 (order: 9, 4194304 > bytes) > [ 0.000000] Memory: 8298752k available (3592k kernel code, 1480k data, > 232k init) [fffff80000000000,000000a1ffb14000] > > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 > [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. > [ 0.000000] NR_IRQS:255 > [ 0.000000] clocksource: mult[64000000] shift[24] > [ 0.000000] clockevent: mult[28f5c29] shift[32] > [ 0.000000] Console: colour dummy device 80x25 > [ 33.458033] Calibrating delay using timer specific routine.. 19.99 > BogoMIPS (lpj=39994) > [ 33.552108] pid_max: default: 32768 minimum: 301 > [ 33.607406] Security Framework initialized > [ 33.656289] AppArmor: AppArmor disabled by boot time parameter > [ 33.726109] Mount-cache hash table entries: 512 > [ 33.780614] Initializing cgroup subsys cpuacct > [ 33.833381] Initializing cgroup subsys memory > [ 33.885468] Initializing cgroup subsys devices > [ 33.938577] Initializing cgroup subsys freezer > [ 33.991703] Initializing cgroup subsys net_cls > [ 34.044830] Initializing cgroup subsys blkio > [ 34.095882] Initializing cgroup subsys perf_event > [ 34.152273] Performance events: Supported PMU type is 'ultra4+' > [ 34.224042] CPU 0: synchronized TICK with master CPU (last diff -1 > cycles, maxerr 8 cycles) > [ 34.323467] CPU 16: synchronized TICK with master CPU (last diff 0 > cycles, maxerr 8 cycles) > [ 34.423219] CPU 18: synchronized TICK with master CPU (last diff 0 > cycles, maxerr 0 cycles) > [ 34.423249] Brought up 4 CPUs > [ 34.558397] Testing NMI watchdog ... OK. > [ 34.684248] devtmpfs: initialized > [ 34.723534] print_constraints: dummy: > [ 34.768002] NET: Registered protocol family 16 > [ 34.824694] /pci@8,700000: SCHIZO PCI Bus Module ver[7:0] > [ 34.887463] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000] > [ 34.961945] PCI: Scanning PBM /pci@8,700000 > [ 35.010617] /pci@8,600000: SCHIZO PCI Bus Module ver[7:0] > [ 35.074758] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000] > [ 35.149239] PCI: Scanning PBM /pci@8,600000 > [ 35.197703] /pci@8,600000: PCI Error, primary error type[Master Abort] > [ 35.197740] /pci@9,700000: SCHIZO PCI Bus Module ver[7:0] > [ 35.197747] /pci@9,700000: PCI IO[7ffeb000000] MEM[7fc00000000] > [ 35.201434] PCI: Scanning PBM /pci@9,700000 > [ 35.202596] /pci@9,600000: SCHIZO PCI Bus Module ver[7:0] > [ 35.202604] /pci@9,600000: PCI IO[7ffe9000000] MEM[7fb00000000] > [ 35.206292] PCI: Scanning PBM /pci@9,600000 > [ 35.646434] /pci@8,600000: bytemask[0003] was_block(0) space(Memory) > [ 35.722477] /pci@8,600000: PCI AFAR [00000000004000c0] > [ 35.783936] /pci@8,600000: PCI Secondary errors [(Master Abort)] > [ 35.855832] Unable to handle kernel NULL pointer dereference > [ 35.923522] tsk->{mm,active_mm}->context = 0000000000000000 > [ 35.990191] tsk->{mm,active_mm}->pgd = fffff8a000961690 > [ 36.052694] \|/ ____ \|/ > [ 36.052696] "@'/ .. \`@" > [ 36.052698] /_| \__/ |_\ > [ 36.052699] \__U_/ > [ 36.228741] swapper/0(0): Oops [#1] > [ 36.270409] TSTATE: 0000004411e01602 TPC: 000000000043d04c TNPC: > 000000000043d050 Y: 00000000 Not tainted > [ 36.388128] TPC: <schizo_pcierr_intr+0x12c/0x400> > [ 36.444370] g0: 0000000000000000 g1: 0000000000000000 g2: > 00060002010b003f g3: 0000000000000000 > [ 36.548540] g4: fffff8a1ff0d58a0 g5: fffff8a0042cc000 g6: > fffff8a1ff0f4000 g7: 0000000000000000 > [ 36.652710] o0: 00000000008e4f30 o1: fffff8a004c04148 o2: > 0000000000000006 o3: fffff8a1ffac3c7e > [ 36.756880] o4: 0000000000000014 o5: 000000000000000e sp: > fffff8a1ffac33c1 ret_pc: 0000000000000000 > [ 36.865214] RPC: < (null)> > [ 36.906883] l0: 0000000000890000 l1: 0000000011001601 l2: > 000000000042ae20 l3: 0000000000000400 > [ 37.011053] l4: 0000000000000000 l5: 0000000000000000 l6: > 0000000000000000 l7: 0000000000000008 > [ 37.115223] i0: 0000000000000000 i1: fffff8a1ff15e800 i2: > 0000000000000001 i3: 00000000004000c0 > [ 37.219392] i4: 0000000000000000 i5: 0000000000000000 i6: > fffff8a1ffac3481 i7: 00000000004af244 > [ 37.323569] I7: <handle_irq_event_percpu+0x78/0x204> > [ 37.382937] Call Trace: > [ 37.412106] [00000000004af244] handle_irq_event_percpu+0x78/0x204 > [ 37.486065] [00000000004af3fc] handle_irq_event+0x2c/0x58 > [ 37.551696] [00000000004b1c38] handle_fasteoi_irq+0xc0/0x118 > [ 37.620444] [00000000004aeab0] generic_handle_irq+0x38/0x48 > [ 37.688160] [000000000042a8ac] handler_irq+0xb0/0xe4 > [ 37.748576] [00000000004208b4] tl0_irq5+0x14/0x20 > [ 37.805871] [00000000005f60b0] find_next_bit+0x10/0xa8 > [ 37.868376] [00000000004381d8] touch_nmi_watchdog+0x70/0x90 > [ 37.936079] [000000000042ad7c] cpu_idle+0x4c/0x118 > [ 37.994418] [00000000009265e8] after_lock_tlb+0x1b4/0x1cc > [ 38.060038] [0000000000000000] (null) > [ 38.115249] Disabling lock debugging due to kernel taint > [ 38.178794] Caller[00000000004af244]: handle_irq_event_percpu+0x78/0x204 > [ 38.259003] Caller[00000000004af3fc]: handle_irq_event+0x2c/0x58 > [ 38.330880] Caller[00000000004b1c38]: handle_fasteoi_irq+0xc0/0x118 > [ 38.405883] Caller[00000000004aeab0]: generic_handle_irq+0x38/0x48 > [ 38.479843] Caller[000000000042a8ac]: handler_irq+0xb0/0xe4 > [ 38.546511] Caller[00000000004208b4]: tl0_irq5+0x14/0x20 > [ 38.610055] Caller[00000000005f6134]: find_next_bit+0x94/0xa8 > [ 38.678807] Caller[00000000004381d8]: touch_nmi_watchdog+0x70/0x90 > [ 38.752767] Caller[000000000042ad7c]: cpu_idle+0x4c/0x118 > [ 38.817352] Caller[00000000009265e8]: after_lock_tlb+0x1b4/0x1cc > [ 38.889227] Caller[0000000000000000]: (null) > [ 38.950686] Instruction DUMP: 94102006 9607a7fd c2586038 <d0586010> > 40070e8c d2006038 d417a7fd 0300001e 82106100 > [ 39.079859] Kernel panic - not syncing: Aiee, killing interrupt handler! > [ 39.160068] Call Trace: > [ 39.189242] [0000000000468560] do_exit+0x94/0x748 > [ 39.246531] [0000000000427694] die_if_kernel+0x2a0/0x2c8 > [ 39.311119] [0000000000783a44] unhandled_fault+0x8c/0x98 > [ 39.375700] [0000000000784150] do_sparc64_fault+0x700/0x7a4 > [ 39.443411] [00000000004079a8] sparc64_realfault_common+0x10/0x20 > [ 39.517371] [000000000043d04c] schizo_pcierr_intr+0x12c/0x400 > [ 39.587165] [00000000004af244] handle_irq_event_percpu+0x78/0x204 > [ 39.661124] [00000000004af3fc] handle_irq_event+0x2c/0x58 > [ 39.726751] [00000000004b1c38] handle_fasteoi_irq+0xc0/0x118 > [ 39.795502] [00000000004aeab0] generic_handle_irq+0x38/0x48 > [ 39.863214] [000000000042a8ac] handler_irq+0xb0/0xe4 > [ 39.923632] [00000000004208b4] tl0_irq5+0x14/0x20 > [ 39.980925] [00000000005f60b0] find_next_bit+0x10/0xa8 > [ 40.043426] [00000000004381d8] touch_nmi_watchdog+0x70/0x90 > [ 40.111136] [000000000042ad7c] cpu_idle+0x4c/0x118 > [ 40.169472] [00000000009265e8] after_lock_tlb+0x1b4/0x1cc > [ 40.235100] Press Stop-A (L1-A) to return to the boot prom > [ 40.300819] sched: RT throttling activated > [ 40.349806] bio: create slab <bio-0> at 0 > [ 40.397884] vgaarb: loaded > [ 40.430433] /pci@9,700000/ebus@1/rtc@1,300070: RTC regs at > 0x7fc7e300070 > [ 40.510503] Switching to clocksource stick > [ 65.102669] BUG: soft lockup - CPU#2 stuck for 21s! [migration/2:6] > [ 65.175872] Modules linked in: > [ 65.212334] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: > 00000000004a51d4 Y: 00000000 Tainted: G D > [ 65.341516] TPC: <stop_machine_cpu_stop+0x60/0x108> > [ 65.399837] g0: 0000000000000000 g1: 0000000000000001 g2: > 0000000000000100 g3: 00000000008a7740 > [ 65.504007] g4: fffff8a1ff09d880 g5: fffff8a0043cc000 g6: > fffff8a1ff0c0000 g7: 0000000000000004 > [ 65.608176] o0: 0000000000000003 o1: fffff8a1ff08fc7c o2: > 0000000000000001 o3: 0000000000000001 > [ 65.712347] o4: 0000000000000000 o5: 0000000000000000 sp: > fffff8a1ff0c3481 ret_pc: 00000000004a5220 > [ 65.820682] RPC: <stop_machine_cpu_stop+0xb0/0x108> > [ 65.879017] l0: fffff8a1ff085860 l1: 0000000000000002 l2: > 000000000093a2c0 l3: 0000000000000400 > [ 65.983186] l4: 0000000000000010 l5: 00000000009743a8 l6: > 000000000093a2c0 l7: 0000000000000200 > [ 66.087356] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: > 0000000000000000 i3: 0000000000000001 > [ 66.191525] i4: 0000000000000000 i5: 0000000000000000 i6: > fffff8a1ff0c3531 i7: 00000000004a5358 > [ 66.295696] I7: <cpu_stopper_thread+0xa0/0x128> > [ 66.349861] Call Trace: > [ 66.379032] [00000000004a5358] cpu_stopper_thread+0xa0/0x128 > [ 66.447786] [00000000004813f8] kthread+0x5c/0x70 > [ 66.504041] [000000000042a9cc] kernel_thread+0x30/0x48 > [ 66.566535] [0000000000481734] kthreadd+0xe0/0x124 > [ 66.642799] BUG: soft lockup - CPU#16 stuck for 23s! [migration/16:12] > [ 66.687612] BUG: soft lockup - CPU#18 stuck for 23s! [migration/18:16] > [ 66.687617] Modules linked in: > [ 66.687622] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: > 00000000004a51d4 Y: 00000000 Tainted: G D > [ 66.687632] TPC: <stop_machine_cpu_stop+0x60/0x108> > [ 66.687636] g0: 0000000000000000 g1: 0000000000000001 g2: > 0000000000000100 g3: 00000000008a7740 > [ 66.687641] g4: fffff8a1ff10ecc0 g5: fffff8a0045cc000 g6: > fffff8a1ff134000 g7: 0000000000000003 > [ 66.687646] o0: 0000000000000002 o1: fffff8a1ff08fc7c o2: > 0000000000000002 o3: 0000000000001000 > [ 66.687652] o4: 0000000000000000 o5: 0000000000000000 sp: > fffff8a1ff137481 ret_pc: 00000000004a5220 > [ 66.687658] RPC: <stop_machine_cpu_stop+0xb0/0x108> > [ 66.687662] l0: fffff8a1ff11f8e0 l1: 0000000000000b4c l2: > 0000000000934cc0 l3: 0000000000890000 > [ 66.687668] l4: 0000000000890080 l5: 00000000008210f8 l6: > 0000000000934140 l7: fffff8a1ff13d820 > [ 66.687673] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: > 0000000000000000 i3: 0000000000000001 > [ 66.687678] i4: 0000000000000000 i5: 0000000000000000 i6: > fffff8a1ff137531 i7: 00000000004a5358 > [ 66.687685] I7: <cpu_stopper_thread+0xa0/0x128> > [ 66.687688] Call Trace: > [ 66.687692] [00000000004a5358] cpu_stopper_thread+0xa0/0x128 > [ 66.687697] [00000000004813f8] kthread+0x5c/0x70 > [ 66.687702] [000000000042a9cc] kernel_thread+0x30/0x48 > [ 66.687707] [0000000000481734] kthreadd+0xe0/0x124 > [ 68.246267] Modules linked in: > [ 68.282728] TSTATE: 0000009980001600 TPC: 00000000004a51d0 TNPC: > 00000000004a51d4 Y: 00000000 Tainted: G D > [ 68.411905] TPC: <stop_machine_cpu_stop+0x60/0x108> > [ 68.470233] g0: 0000000000000000 g1: 0000000000000001 g2: > 0000000000000100 g3: 00000000008a7740 > [ 68.574401] g4: fffff8a1ff0d4ca0 g5: fffff8a0044cc000 g6: > fffff8a1ff0fc000 g7: 0000000000000002 > [ 68.678571] o0: 0000000000000001 o1: fffff8a1ff08fc7c o2: > 0000000000000001 o3: 000000000078a000 > [ 68.782740] o4: 0000000000000000 o5: 0000000000000000 sp: > fffff8a1ff0ff481 ret_pc: 00000000004a5220 > [ 68.891078] RPC: <stop_machine_cpu_stop+0xb0/0x108> > [ 68.949411] l0: fffff8a1ff10f8c0 l1: 0000000000974450 l2: > 0000000000200200 l3: fffff8a1ffab7e50 > [ 69.053581] l4: 0000000000890080 l5: 0000000000000081 l6: > fffff8a1ff105420 l7: fffff8a1ff105820 > [ 69.157750] i0: fffff8a1ff08fc58 i1: fffff8a1ff08fc7c i2: > 0000000000000000 i3: 0000000000000001 > [ 69.261920] i4: 0000000000000000 i5: 0000000000000000 i6: > fffff8a1ff0ff531 i7: 00000000004a5358 > [ 69.366092] I7: <cpu_stopper_thread+0xa0/0x128> > [ 69.420257] Call Trace: > [ 69.449427] [00000000004a5358] cpu_stopper_thread+0xa0/0x128 > [ 69.518179] [00000000004813f8] kthread+0x5c/0x70 > > *[ 69.574430] [000000000042a9cc] kernel_thread+0x30/0x48 [ > 69.636930] [0000000000481734] kthreadd+0xe0/0x124* > > > after the last step shown above nothing is coming.it stopped there. > > What may be the problem. > > > On Sat, Jul 12, 2014 at 1:07 AM, Hartwig Atrops <[email protected]> > wrote: > >> Hi. >> >> On Friday 11 July 2014 19:57:13 shyam prasad wrote: >> > Dear Berckel, >> > >> > The below error i am getting after the installation. >> > >> > >> > >> > lqqqqqqqu [!!] Install the SILO boot loader on a hard disk >> tqqqqqqqqk >> > x >> x >> > x Installation step failed >> x >> > x An installation step failed. You can try to run the failing item >> x >> > x again from the menu, or skip it and choose something else. The >> x >> > x failing step is: Install the SILO boot loader on a hard disk >> x >> > x >> x >> > x <Continue> >> x >> > x >> x >> > >> mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj >> > >> > >> > >> > >> > >> > >> > <Tab> moves; <Space> selects; <Enter> activates buttons >> > >> > What could be the problem.How to resolve it. >> >> Just out of my mind, I did not check: >> >> If you are using a keybord and a monitor attached to the machine you try >> to >> install, you can switch to a text console / shell via ALT-F1 or ALT-F2. >> Somewhere on your disk you should find the configuration file named >> silo.conf. After installation, it's in /boot, but I don't know by mind >> where >> the disk is mounted during installation. >> >> I would check this file (does it look reasonable?). Then run silo >> manually >> (chroot into the system? ). Hopefully, you will get better error messages. >> >> If you are using a serial console: no idea. >> >> Regards, >> >> Hartwig >> >> >> -- >> To UNSUBSCRIBE, email to [email protected] >> with a subject of "unsubscribe". Trouble? Contact >> [email protected] >> Archive: >> https://lists.debian.org/[email protected] >> >> > > > -- > with regards, > k shyam prasad, > JTO,bbmp noc, > bangalore. > -- with regards, k shyam prasad, JTO,bbmp noc, bangalore.
