On Wed, Jan 21, 2026 at 2:51 PM John Paul Adrian Glaubitz <[email protected]> wrote: > > Hi Jeremy, > > On Wed, 2026-01-21 at 13:41 -0500, Jeremy Leonard wrote: > > I've installed Debian SID on my Ultra1 > > > > When trying to boot I get the following error: > > > > Can't read disk label. > > Can't open disk label package > > error: unable to open /sbus@1f,0/SUNW,fdtwo@f,1400000. > > > > The install works properly, no errors during installation. > > (...( > > grub> ls > > Can't read disk label. > > Can't open disk label package > > error: unable to open /sbus@1f,0/SUNW,fdtwo@f,1400000. > > Did you happen to use a custom partition layout? It could be that you used an > advanced > partition layout such as LVM that isn't working with your bootloader > configuration.
I didn't use a custom layout. Just choose defaults. Use full disk. Single partition. > During installation, the installation process is logged to /var/log/syslog. > After installation, > the log files are available in the folder /var/log/installer. You should > provide these if > necessary in order to help others debug your problem. Here is the link to the logs: https://www.efgsystems.com/files/var.log.installer.tar.bz2 Individual logs can be found here: https://www.efgsystems.com/files/installer/ > Adrian > > -- > .''`. John Paul Adrian Glaubitz > : :' : Debian Developer > `. `' Physicist > `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913 -- Jeremy Leonard [email protected] Cell: (517) 285-8309
