OK. I have noticed that it does see the card but it sees no drives on it
even though they are there. I have physicaly checked as well as the card
sees the drives on reset. Are there any paramiters that I should use? I
do not have .19 on my system yet so I cannot find out.
Brian
Brian Schramm
[EMAIL PROTECTED] ICQ 104442754 AIM schrammbrian
www.linuxexpert.org
On Mon, 14 May 2001, Bob Nielsen wrote:
> On Mon, May 14, 2001 at 09:45:45PM -0400, [EMAIL PROTECTED] wrote:
> > > LSI Logic Symbios pci scsi bios.
> > >
> > > I think that is what you are looking for.
> >
> > Not really, no. I wanted a chip number.
> >
> > www.tekram.com, flip, flip, flip.....
> >
> > It's a Symbos 53C1010, which appears to be more or less compatible with the
> > 53C8xx chips used in the earlier tekram cards. At least, there're
> > references
> > to them in the 2.4 series kernels' 53c8xx driver sources, so I assume they
> > work, but there's no mention of them in my copy of the 2.2.13 sources I have
> > here, so you may require a 2.4 kernel to use this card. You should check
> > the 2.2.19 sources.
>
> 2.2.19 (also .18) contains a newer sym53c8xx.c driver, which states
> that it supports the 53C1010 and 53C1010_66 chips.
>
> Bob
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
