No serà que la eth0 hi tens la Intel gigabit? Perquè fas un /etc/init.d/networking restart, quan podries fer un ifup eth0? Potser et falta un "auto eth0" a l'arxiu /etc/network/interfaces? La tens configurada?
El nucli 2.6 soporta perfectament les dues targetes que tens. El Dijous 06 Abril 2006 15:02, juan perez va escriure: > Bones a tots i totes: > Tinc problemes per configurar la tarja ethernet , heus ací el que fet: > # ifconfig > debian:/home/joan# ifconfig > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:212 errors:0 dropped:0 overruns:0 frame:0 > TX packets:212 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:28860 (28.1 KiB) TX bytes:28860 (28.1 KiB) > > no detecta eth0 > > debian:/home/joan# lspci > 0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM > Controller/Host-Hub Interface (rev 02) > 0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated > Graphics Device (rev 02) > 0000:00:03.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to CSA Bridge (rev 02) > 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > UHCI #1 (rev 02) > 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > UHCI #2 (rev 02) > 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > UHCI #3 (rev 02) > 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > UHCI #4 (rev 02) > 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 > EHCI Controller (rev 02) > 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) > 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge > (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) > Ultra ATA 100 Storage Controller (rev 02) > 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus > Controller (rev 02) > 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER > (ICH5/ICH5R) AC'97 Audio Controller (rev 02) > 0000:01:01.0 Ethernet controller: Intel Corp. 82547EI Gigabit Ethernet > Controller (LOM) > 0000:02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M > [Tornado] (rev 78) > 0000:02:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 > IEEE-1394a-2000 Controller (PHY/Link) > > debian:/home/joan# apt-get install modconf > . > i després faig > . > debian:/home/joan# modconf > vaig a kernel/drivers/net > i com la meva tarja 3Com 3c905C es 3c59x (3c590/3c900 series) > > acabe la instalació amb exit i faig > # /etc/init.d/networking restart > ara faig > # ifconfig > i surt > debian:/home/joan# ifconfig > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:212 errors:0 dropped:0 overruns:0 frame:0 > TX packets:212 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:28860 (28.1 KiB) TX bytes:28860 (28.1 KiB) > > > Vaig instal·lar Debian sarge amb l'opció linux26 > que puc fer ara ? > > Atentament, > Joan. > -- > Juan Perez. -- :: :: :: :: :: :: :: :: :: :: :: :: :: :: :: :: :: Jaume Sabater :: administrador de sistemes :: [EMAIL PROTECTED] argus.net TECNOLOGIA CREATIVA "creant en la web des de 1995" www.argus.net | tel: 932 92 41 00 | fax: 932 92 42 25 | [EMAIL PROTECTED] Avgda. Marquès de Comillas, 13 (Poble Espanyol) | 08038 | Barcelona -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]