Nej, jeg beklager. N�ste skridt i min bog ville v�re, at tjekke om du tilf�ldigvis ser nogen proces sluge cpu-tiden (kswapd er min egen favorit)... Og derefter s�ge hj�lp p� den engelske debian-user.
Med venlig hilsen, Anders Breindahl. On Monday 18 April 2005 21:13, you wrote: > Anders Breindahl wrote: > > Det var da en sjov historie. Alts�, ikke fordi jeg morer mig, men -- > > finurlig. Kunne du sende outputtet af: > > > > `lsmod' > > `dmesg' > > `tail -n 100 /var/log/messages' > > > > -- Efter du eventuelt stryger private oplysninger outputtet. > > > > Jeg t�r ikke garantere om der er noget at finde, men -- vi kan jo kigge > > p� det, og se om der er noget du har overset. :) > > > > Med venlig hilsen, Anders Breindahl. > > Nu har jeg endelig f�et den op igen. Jeg har ikke rigtigt brugt den, > fordi jeg blev s� irriteret over, at den var s� langsom... > > krikkit:~# lsmod > Module Size Used by Not tainted > 3c59x 24648 1 > smbfs 31296 0 (unused) > nfsd 42848 0 (unused) > keybdev 1664 0 (unused) > usbkbd 2848 0 (unused) > input 3072 0 [keybdev usbkbd] > usb-uhci 20708 0 (unused) > usbcore 48032 0 [usbkbd usb-uhci] > > krikkit:~# dmesg > Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 > (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000006000000 (usable) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > On node 0 totalpages: 24576 > zone(0): 4096 pages. > zone(1): 20480 pages. > zone(2): 0 pages. > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Kernel command line: auto BOOT_IMAGE=Linux ro root=301 > Initializing CPU#0 > Detected 231.787 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 445.64 BogoMIPS > Memory: 93432k/98304k available (1783k kernel code, 4488k reserved, 549k > data, 280k init, 0k highmem) > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0080fbff 00000000 00000000 00000000 > CPU: Common caps: 0080fbff 00000000 00000000 00000000 > CPU: Intel Pentium II (Klamath) stepping 04 > Checking 'hlt' instruction... OK. > Checking for popad bug... OK. > POSIX conformance testing by UNIFIX > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 231.7916 MHz. > ..... host bus clock speed is 66.2233 MHz. > cpu: 0, clocks: 662233, slice: 331116 > CPU0<T0:662224,T1:330992,D:116,S:331116,C:662233> > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfcaae, last bus=2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 0: assuming transparent > Unknown bridge resource 1: assuming transparent > Unknown bridge resource 2: assuming transparent > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > Limiting direct PCI/PCI transfers. > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > VFS: Diskquotas version dquot_6.4.0 initialized > Journalled Block Device driver loaded > vga16fb: initializing > vga16fb: mapped to 0xc00a0000 > Console: switching to colour frame buffer device 80x30 > fb0: VGA16 VGA frame buffer device > pty: 256 Unix98 ptys configured > keyboard: Timeout - AT keyboard not present?(ed) > keyboard: Timeout - AT keyboard not present?(f4) > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > SERIAL_PCI enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10e > block: 128 slots per queue, batch=32 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > hda: Maxtor 84320D4, ATA DISK drive > hdc: TOSHIBA CD-ROM XM-6102B, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 8439184 sectors (4321 MB) w/256KiB Cache, CHS=525/255/63 > hdc: ATAPI 24X CD-ROM drive, 256kB Cache > Uniform CD-ROM driver Revision: 3.12 > ide-floppy driver 0.97.sv > Partition check: > hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > > Floppy drive(s): fd0 is 1.44M > FDC 0 is a National Semiconductor PC87306 > Loading I2O Core - (c) Copyright 1999 Red Hat Software > I2O configuration manager v 0.04. > (C) Copyright 1999 Red Hat Software > loop: loaded (max 8 devices) > Compaq CISS Driver (v 2.4.5) > HDLC support module revision 1.02 for Linux 2.4 > Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 > Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. > ide-floppy driver 0.97.sv > Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found > Highpoint HPT370 Softwareraid driver for linux version 0.01 > No raid array found > SCSI subsystem driver Revision: 1.00 > Red Hat/Adaptec aacraid driver, Apr 14 2002 > DC390: 0 adapters found > 3ware Storage Controller device driver for Linux v1.02.00.016. > 3w-xxxx: No cards with valid units found. > request_module[scsi_hostadapter]: Root fs not mounted > request_module[scsi_hostadapter]: Root fs not mounted > i2o_scsi.c: Version 0.0.1 > chain_pool: 0 bytes @ c1185d80 > (512 byte buffers X 4 can_queue X 0 i2o controllers) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 8192 bind 8192) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 280k freed > Adding Swap: 248968k swap-space (priority -1) > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 11 for device 00:07.2 > PCI: Sharing IRQ 11 with 00:11.0 > usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usb.c: registered new driver keyboard > usbkbd.c: :USB HID Boot Protocol keyboard driver > Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). > PCI: Found IRQ 11 for device 00:11.0 > PCI: Sharing IRQ 11 with 00:07.2 > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 00:11.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xdc80. Vers LK1.1.16 > ***INVALID CHECKSUM 003e*** <6>kjournald starting. Commit interval 5 > seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > > krikkit:~# tail -n 100 /var/log/messages > Apr 18 20:06:06 krikkit kernel: PCI: Using IRQ router PIIX [8086/7110] > at 00:07.0 > Apr 18 20:06:06 krikkit kernel: Limiting direct PCI/PCI transfers. > Apr 18 20:06:06 krikkit kernel: Linux NET4.0 for Linux 2.4 > Apr 18 20:06:06 krikkit kernel: Based upon Swansea University Computer > Society NET3.039 > Apr 18 20:06:06 krikkit kernel: Initializing RT netlink socket > Apr 18 20:06:06 krikkit kernel: Starting kswapd > Apr 18 20:06:06 krikkit kernel: VFS: Diskquotas version dquot_6.4.0 > initialized > Apr 18 20:06:06 krikkit kernel: Journalled Block Device driver loaded > Apr 18 20:06:07 krikkit kernel: vga16fb: mapped to 0xc00a0000 > Apr 18 20:06:07 krikkit kernel: Console: switching to colour frame > buffer device 80x30 > Apr 18 20:06:07 krikkit kernel: fb0: VGA16 VGA frame buffer device > Apr 18 20:06:07 krikkit kernel: pty: 256 Unix98 ptys configured > Apr 18 20:06:07 krikkit kernel: keyboard: Timeout - AT keyboard not > present?(ed) > Apr 18 20:06:07 krikkit kernel: keyboard: Timeout - AT keyboard not > present?(f4) > Apr 18 20:06:07 krikkit kernel: Serial driver version 5.05c (2001-07-08) > with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled > Apr 18 20:06:07 krikkit kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A > Apr 18 20:06:07 krikkit kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A > Apr 18 20:06:07 krikkit kernel: Real Time Clock Driver v1.10e > Apr 18 20:06:07 krikkit kernel: block: 128 slots per queue, batch=32 > Apr 18 20:06:07 krikkit kernel: RAMDISK driver initialized: 16 RAM disks > of 4096K size 1024 blocksize > Apr 18 20:06:07 krikkit kernel: Uniform Multi-Platform E-IDE driver > Revision: 6.31 > Apr 18 20:06:07 krikkit kernel: ide: Assuming 33MHz system bus speed for > PIO modes; override with idebus=xx > Apr 18 20:06:07 krikkit kernel: PIIX4: IDE controller on PCI bus 00 dev 39 > Apr 18 20:06:07 krikkit kernel: PIIX4: chipset revision 1 > Apr 18 20:06:08 krikkit kernel: PIIX4: not 100%% native mode: will probe > irqs later > Apr 18 20:06:08 krikkit kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS > settings: hda:DMA, hdb:pio > Apr 18 20:06:08 krikkit kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS > settings: hdc:DMA, hdd:pio > Apr 18 20:06:08 krikkit kernel: hda: Maxtor 84320D4, ATA DISK drive > Apr 18 20:06:08 krikkit kernel: hdc: TOSHIBA CD-ROM XM-6102B, ATAPI > CD/DVD-ROM drive > Apr 18 20:06:08 krikkit kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Apr 18 20:06:08 krikkit kernel: ide1 at 0x170-0x177,0x376 on irq 15 > Apr 18 20:06:08 krikkit kernel: hda: 8439184 sectors (4321 MB) w/256KiB > Cache, CHS=525/255/63 > Apr 18 20:06:08 krikkit kernel: hdc: ATAPI 24X CD-ROM drive, 256kB Cache > Apr 18 20:06:08 krikkit kernel: Uniform CD-ROM driver Revision: 3.12 > Apr 18 20:06:08 krikkit kernel: ide-floppy driver 0.97.sv > Apr 18 20:06:08 krikkit kernel: Partition check: > Apr 18 20:06:08 krikkit kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > > Apr 18 20:06:08 krikkit kernel: Floppy drive(s): fd0 is 1.44M > Apr 18 20:06:08 krikkit kernel: FDC 0 is a National Semiconductor PC87306 > Apr 18 20:06:08 krikkit kernel: Loading I2O Core - (c) Copyright 1999 > Red Hat Software > Apr 18 20:06:09 krikkit kernel: I2O configuration manager v 0.04. > Apr 18 20:06:09 krikkit kernel: (C) Copyright 1999 Red Hat Software > Apr 18 20:06:09 krikkit kernel: loop: loaded (max 8 devices) > Apr 18 20:06:09 krikkit kernel: Compaq CISS Driver (v 2.4.5) > Apr 18 20:06:09 krikkit kernel: HDLC support module revision 1.02 for > Linux 2.4 > Apr 18 20:06:09 krikkit kernel: Cronyx Ltd, Synchronous PPP and CISCO > HDLC (c) 1994 > Apr 18 20:06:09 krikkit kernel: Linux port (c) 1998 Building Number > Three Ltd & Jan "Yenya" Kasprzak. > Apr 18 20:06:09 krikkit kernel: ide-floppy driver 0.97.sv > Apr 18 20:06:09 krikkit kernel: Highpoint HPT370 Softwareraid driver for > linux version 0.01 > Apr 18 20:06:09 krikkit kernel: No raid array found > Apr 18 20:06:09 krikkit kernel: SCSI subsystem driver Revision: 1.00 > Apr 18 20:06:09 krikkit kernel: Red Hat/Adaptec aacraid driver, Apr 14 2002 > Apr 18 20:06:09 krikkit kernel: DC390: 0 adapters found > Apr 18 20:06:09 krikkit kernel: 3ware Storage Controller device driver > for Linux v1.02.00.016. > Apr 18 20:06:09 krikkit kernel: 3w-xxxx: No cards with valid units found. > Apr 18 20:06:10 krikkit kernel: i2o_scsi.c: Version 0.0.1 > Apr 18 20:06:10 krikkit kernel: chain_pool: 0 bytes @ c1185d80 > Apr 18 20:06:10 krikkit kernel: (512 byte buffers X 4 can_queue X 0 > i2o controllers) > Apr 18 20:06:10 krikkit kernel: NET4: Linux TCP/IP 1.0 for NET4.0 > Apr 18 20:06:10 krikkit kernel: IP Protocols: ICMP, UDP, TCP, IGMP > Apr 18 20:06:10 krikkit kernel: IP: routing cache hash table of 512 > buckets, 4Kbytes > Apr 18 20:06:10 krikkit kernel: TCP: Hash tables configured (established > 8192 bind 8192) > Apr 18 20:06:11 krikkit kernel: NET4: Unix domain sockets 1.0/SMP for > Linux NET4.0. > Apr 18 20:06:11 krikkit kernel: kjournald starting. Commit interval 5 > seconds > Apr 18 20:06:11 krikkit kernel: EXT3-fs: mounted filesystem with ordered > data mode. > Apr 18 20:06:11 krikkit kernel: VFS: Mounted root (ext3 filesystem) > readonly. > Apr 18 20:06:11 krikkit kernel: Freeing unused kernel memory: 280k freed > Apr 18 20:06:11 krikkit kernel: Adding Swap: 248968k swap-space > (priority -1) > Apr 18 20:06:11 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on > ide0(3,1), internal journal > Apr 18 20:06:11 krikkit kernel: usb.c: registered new driver usbdevfs > Apr 18 20:06:11 krikkit kernel: usb.c: registered new driver hub > Apr 18 20:06:11 krikkit kernel: usb-uhci.c: $Revision: 1.275 $ time > 10:29:43 Apr 14 2002 > Apr 18 20:06:12 krikkit kernel: usb-uhci.c: High bandwidth mode enabled > Apr 18 20:06:12 krikkit kernel: PCI: Found IRQ 11 for device 00:07.2 > Apr 18 20:06:12 krikkit kernel: PCI: Sharing IRQ 11 with 00:11.0 > Apr 18 20:06:12 krikkit kernel: usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11 > Apr 18 20:06:12 krikkit kernel: usb-uhci.c: Detected 2 ports > Apr 18 20:06:12 krikkit kernel: usb.c: new USB bus registered, assigned > bus number 1 > Apr 18 20:06:12 krikkit kernel: hub.c: USB hub found > Apr 18 20:06:12 krikkit kernel: hub.c: 2 ports detected > Apr 18 20:06:12 krikkit kernel: usb-uhci.c: v1.275:USB Universal Host > Controller Interface driver > Apr 18 20:06:13 krikkit kernel: usb.c: registered new driver keyboard > Apr 18 20:06:13 krikkit kernel: usbkbd.c: :USB HID Boot Protocol > keyboard driver > Apr 18 20:06:13 krikkit kernel: Installing knfsd (copyright (C) 1996 > [EMAIL PROTECTED]). > Apr 18 20:06:13 krikkit kernel: PCI: Found IRQ 11 for device 00:11.0 > Apr 18 20:06:13 krikkit kernel: PCI: Sharing IRQ 11 with 00:07.2 > Apr 18 20:06:13 krikkit kernel: 3c59x: Donald Becker and others. > www.scyld.com/network/vortex.html > Apr 18 20:06:13 krikkit kernel: 00:11.0: 3Com PCI 3c905 Boomerang > 100baseTx at 0xdc80. Vers LK1.1.16 > Apr 18 20:06:13 krikkit kernel: ***INVALID CHECKSUM 003e*** > <6>kjournald starting. Commit interval 5 seconds > Apr 18 20:06:13 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on > ide0(3,6), internal journal > Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered > data mode. > Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5 > seconds > Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on > ide0(3,7), internal journal > Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered > data mode. > Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5 > seconds > Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on > ide0(3,8), internal journal > Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered > data mode. > Apr 18 20:06:14 krikkit kernel: kjournald starting. Commit interval 5 > seconds > Apr 18 20:06:14 krikkit kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on > ide0(3,9), internal journal > Apr 18 20:06:14 krikkit kernel: EXT3-fs: mounted filesystem with ordered > data mode. > > Jeg kan ikke se noget, der er galt... Er der nogen andre, der kan? :)
