Hi Eduard,
On Wed, Jun 13, 2001 at 12:46:52PM +0200, Eduard Bloch wrote:
> Mehr Info bitte...
AOpen AX59Pro BIOS 2.35 (das Neueste auf den AOpen-Servern)
Realtek 8139
miroPCTV
Dawicontrol SCSi-Controller 2674UW
SB 64PCI
>
> Welcher Kernel? Hast du alle IRQs belegt? Ist "PNP-OS" im BIOS an- oder
> deaktiviert? Schon mal im Bios die "DPMI" Daten reset'ed?
die Meldungen tauchen so oder �hnlich bei allen Kernel ab 2.4.0 auf. Ich habe
gerade 2.4.6-pre3 gebaut. Es hat sich nichts ge�ndert. PNP-OS ist deaktiviert.
Gerade habe ich die BIOS-Daten per Jumper auf dem Board gel�scht. Alles was ich
nicht brauche ist im BIOS deaktiviert: USB, ACPI, Parallelport. Die
Netzwerkkarte und die Graphikkarte teilen sich einen IRQ. Daran l�sst sich
scheinbar nichts �ndern.
$ cat /proc/interrupts
CPU0
0: 168452 XT-PIC timer
1: 9522 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 2843 XT-PIC
5: 0 XT-PIC es1370
7: 53 XT-PIC sym53c8xx
8: 1 XT-PIC rtc
11: 11774 XT-PIC eth0
12: 72 XT-PIC bttv
14: 1932 XT-PIC ide0
15: 6 XT-PIC ide1
NMI: 0
ERR: 0
Was bedeuten die Meldungen �berhaupt? Was macht die "pirq table"? Der PC l�uft
soweit relativ stabil. Allerdings st�rzt er reproduzierbar ab, wenn ich fernsehe
und dabei gr�ssere Datenmengen �ber das Netzwerk kopiere. Das passiert auch mit
2.2er Kerneln und FreeBSD.
Ich h�nge mal den Output von dmesg an die Mail.
Danke
Michael
Linux version 2.4.6-pre3 (root@cassiopeia) (gcc version 2.95.2 20000220 (Debian
GNU/Linux)) #1 Mit Jun 13 14:30:52 MEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Lin ro root=302 BOOT_FILE=/boot/bzImage-2.4.6-pre3
Initializing CPU#0
Detected 400.923 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 126572k/131072k available (1061k kernel code, 4116k reserved, 410k data, 224k
init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Disabled enhanced CPU to PCI posting #2
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
vesafb: framebuffer at 0xe6000000, mapped to 0xc8800000, size 16320k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:02e9
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 84000kB/28000kB, 256 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0x6400-0x6407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x6408-0x640f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DHEA-36480, ATA DISK drive
hdc: IBM-DJNA-351520, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12692736 sectors (6499 MB) w/476KiB Cache, CHS=790/255/63, UDMA(33)
hdc: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
hda1: <bsd: hda9 hda10 hda11 hda12 >
hdc: [PTBL] [1869/255/63] hdc1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Via MVP3 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 5 for device 00:09.0
IRQ routing conflict in pirq table for device 00:09.0
sym53c8xx: at PCI bus 0, device 9, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x26 on pci bus 0 device 9 function 0 irq 7
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3a-20010304
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
sym53c875-0-<3,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
sym53c875-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100.0 ns, offset 15)
sr1: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 224k freed
Adding Swap: 192740k swap-space (priority -1)
8139too Fast Ethernet driver 0.9.17
PCI: Found IRQ 7 for device 00:0c.0
IRQ routing conflict in pirq table for device 00:0c.0
eth0: RealTek RTL8139 Fast Ethernet at 0xc9828000, 00:40:95:33:85:2b, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
es1370: version v0.37 time 14:42:34 Jun 13 2001
PCI: Found IRQ 11 for device 00:0a.0
IRQ routing conflict in pirq table for device 00:0a.0
es1370: found adapter at io 0x7000 irq 5
es1370: features: joystick off, line in, mic impedance 0
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
lp: driver loaded but no devices found
Linux video capture interface: v1.00
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.57 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 12 for device 00:0b.0
bttv0: Bt848 (rev 18) at 00:0b.0, irq: 12, latency: 32, memory: 0xe8002000
bttv0: model: BT848A(MIRO PCTV) [insmod option]
i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing...
i2c-algo-bit.o:1 scl: 1 sda: 0
i2c-algo-bit.o:2 scl: 1 sda: 1
i2c-algo-bit.o:3 scl: 0 sda: 1
i2c-algo-bit.o:4 scl: 1 sda: 1
i2c-algo-bit.o: bt848 #0 passed test.
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=1 tuner=0 radio=no stereo=no
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x60
bttv0: i2c attach [Temic PAL (4002 FH5)]
i2c-core.o: client [Temic PAL (4002 FH5)] registered to adapter [bt848 #0](pos. 0).
