Hi Frank, On Thu, 2016-02-11 at 11:45 +0100, Frank Voncken wrote: > Beste allen, > > ik heb in mijn laptop met Skylake een slot voor sd card. Dit blijkt > sd card echter niet te herkennen. Ik keek in lspci: > > lspci > 00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM > Registers (rev 07) > 00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) > (rev 07) > 00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev > 06) > 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 > xHCI Controller (rev 31) > 00:14.2 Signal processing controller: Intel Corporation Sunrise Point > -H Thermal subsystem (rev 31) > 00:15.0 Signal processing controller: Intel Corporation Sunrise Point > -H LPSS I2C Controller #0 (rev 31) > 00:15.1 Signal processing controller: Intel Corporation Sunrise Point > -H LPSS I2C Controller #1 (rev 31) > 00:16.0 Communication controller: Intel Corporation Sunrise Point-H > CSME HECI #1 (rev 31) > 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA > Controller [AHCI mode] (rev 31) > 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express > Root Port #5 (rev f1) > 00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express > Root Port #6 (rev f1) > 00:1c.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express > Root Port #7 (rev f1) > 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller > (rev 31) > 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev > 31) > 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev > 31) > 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) > 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] > (rev ff) > 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) > 08:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61) > 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. > Device 522a (rev 01) > > Ik zie niks over sd card reader. lsusb geeft ook geen soelaas (of ik > moet iets over het hoofd hebben gezien): > > lsusb > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 004: ID 138a:0050 Validity Sensors, Inc. Swipe > Fingerprint Sensor > Bus 001 Device 003: ID 8087:0a2a Intel Corp. > Bus 001 Device 002: ID 05c8:0379 Cheng Uei Precision Industry Co., > Ltd (Foxlink) > Bus 001 Device 005: ID 0101:0007 > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Wat kan ik nu doen? Weer nieuwe uitdaging voor jullie :-)
Misschien moet er nog wat geladen worden? Laat dmesg wat zien? # dmesg | grep -i sd # dmesg | grep -i firmware Met vriendelijke groet, Frans van Berckel
