Stevan Kanban a �crit :
Stevan Kanban a �crit :
Infos suppl�mentaires:Salut,
Il y a quelques temps, j'ai recompil� mon noyau avec les modules n�cessaires pour usb key et le hotplugin. J'ai install� les packages n�cessaires mais �a n'a jamais march�.
Ce soir, j'ai recommenc� pour soumettre mon probl�me aux utilisateurs debian.
J'ai entr� mount -t vfat /dev/sda1 /media/usbkey et ma console se bloque (Ctrl-z et autres n'y font rien) et donc je tue ma console. Mais ma cl�, je n'arrive toujours pas � la lire.
Le log du kernel donne �a:
Jan 29 01:15:44 hector kernel: ohci_hcd 0000:00:07.4: remote wakeup
Jan 29 01:15:44 hector kernel: usb 1-2: new full speed USB device using address 2
Jan 29 01:15:45 hector kernel: SCSI subsystem initialized
Jan 29 01:15:45 hector kernel: Initializing USB Mass Storage driver...
Jan 29 01:15:45 hector kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 29 01:15:45 hector kernel: Vendor: M-Sys Model: DiskOnKey Rev: 4.31
Jan 29 01:15:45 hector kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 29 01:15:45 hector kernel: SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
Jan 29 01:15:45 hector kernel: sda: assuming Write Enabled
Jan 29 01:15:45 hector kernel: sda: assuming drive cache: write through
Jan 29 01:15:45 hector kernel: sda:SCSI error : <0 0 0 0> return code = 0x70000
Jan 29 01:15:45 hector kernel: end_request: I/O error, dev sda, sector 0
Jan 29 01:15:45 hector kernel: Buffer I/O error on device sda, logical block 0
Jan 29 01:15:45 hector kernel: SCSI error : <0 0 0 0> return code = 0x70000
Jan 29 01:15:45 hector kernel: end_request: I/O error, dev sda, sector 0
Jan 29 01:15:45 hector kernel: Buffer I/O error on device sda, logical block 0
Jan 29 01:15:45 hector kernel: unable to read partition table
Jan 29 01:15:45 hector kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan 29 01:15:45 hector kernel: USB Mass Storage device found at 2
Jan 29 01:15:45 hector kernel: usbcore: registered new driver usb-storage
Jan 29 01:15:45 hector kernel: USB Mass Storage support registered.
Jan 29 01:15:45 hector kernel: hub 1-0:1.0: port 2 disabled by hub (EMI?), re-enabling...<6>usb 1-2: US$
Jan 29 01:15:45 hector kernel: usb 1-2: new full speed USB device using address 3
Jan 29 01:15:45 hector kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Jan 29 01:15:45 hector kernel: Vendor: M-Sys Model: DiskOnKey Rev: 4.31
Jan 29 01:15:45 hector kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 29 01:15:45 hector kernel: SCSI device sda: 239872 512-byte hdwr sectors (123 MB)
Jan 29 01:15:45 hector kernel: sda: assuming Write Enabled
Jan 29 01:15:45 hector kernel: sda: assuming drive cache: write through
Je n'ai pas d'id�e.
Stevan Kanban
# lsmod
Module Size Used by
usb_storage 29952 2
sd_mod 19072 2
scsi_mod 81700 2 usb_storage,sd_mod
parport_pc 22048 1
lp 10144 0
parport 27392 2 parport_pc,lp
ipt_TCPMSS 4928 1
ipt_tcpmss 2880 1
pppoe 14464 2
pppox 4168 1 pppoe
ppp_generic 29388 6 pppoe,pppox
slhc 7872 1 ppp_generic
8250 20224 0
serial_core 22080 1 8250
ipt_state 2624 1
iptable_nat 25316 0
ip_conntrack 36320 2 ipt_state,iptable_nat
iptable_filter 3328 1
ip_tables 17872 5 ipt_TCPMSS,ipt_tcpmss,ipt_state,iptable_nat,iptable_filter
ohci_hcd 20736 0
usbcore 109652 4 usb_storage,ohci_hcd
nls_iso8859_1 4416 1
rtc 12512 0
Mon module est ohci et non ehci.
Autre info:
#lsusb se bloque comme pour le montage ci-dessus. Impossible de scanner le controlleur usb. Ceci est ind�pendant de la pr�sence de la cl� d'ailleurs.
-- Pensez � lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench
Pensez � rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
