Bonjour Je voudrais graver des cd (CD-RW de marque TDK) sur un graveur HP (CD-Writer Plus 9300, ATAPI CD/DVD-ROM drive). Par l'interface ide-Scsi avec un noyau 2.4, j'ai les messages suivants (mode d'enregistrement tao) cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.005s timeout 40
Avec un noyau 2.6 sans interface ide-scsi, �a ne marche pas non plus: Le message est "cdrecord: Drive does not support TAO recording", mais aucun mode d'enregistrement ne semble marcher. La version de cdrecord que j'ai est Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Merci pour toute suggestion ! Fran�ois Pour les connaisseurs plus de d�tail sur le lecteur et le disque: pregap1: -1 Track 01: data 5 MB padsize: 30 KB Total size: 5 MB (00:34.88) = 2616 sectors Lout start: 6 MB (00:36/66) = 2616 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 3 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 3 A1 values: 24 1A BC A2 values: 26 B2 26 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation B
