On 2005-08-14 15:54:35 +0200, Hugo wrote: > sur ma config sarge 3.1r0A, par défaut, la résolution max est limitée à > 800x600
Je viens de faire une install Debian, et même problème. Je l'ai résolution à l'aide d'un "dpkg-reconfigure xserver-xfree86" (les résolutions sont demandées après un certain nombre de questions). Maintenant il y a bien 1280x1024 dans le fichier de config (résolution maxi pour l'écran), mais seul 1024x768 a pu être sélectionné (c'est déjà mieux que 800x600). Dans les logs (/var/log/XFree86.0.log): [...] (II) VESA(0): Supported VESA Video Modes: (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): [EMAIL PROTECTED] (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 135.0 MHz Image Size: 340 x 270 mm (II) VESA(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) VESA(0): Serial No: 05204G3919050 (II) VESA(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 140 MHz (II) VESA(0): Monitor name: PLE430 [...] (WW) VESA(0): config file vrefresh range 50-75Hz not within DDC vrefresh range 55-75Hz (II) VESA(0): PLE430: Using hsync range of 30.00-65.00 kHz (II) VESA(0): PLE430: Using vrefresh range of 50.00-75.00 Hz (II) VESA(0): Not using mode "1280x1024" (no mode of this name) (II) VESA(0): Not using mode "1152x864" (no mode of this name) (--) VESA(0): Virtual size is 1024x768 (pitch 1024) (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (--) VESA(0): Display dimensions: (340, 270) mm (--) VESA(0): DPI set to (76, 72) (II) VESA(0): Attempting to use 75Hz refresh for mode "1024x768" (118) (II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (115) (II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (112) [...] La carte graphique: 0000:01:05.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev 04) Est-ce que "vesa" est le bon driver, ou mieux va utiliser autre chose? -- Vincent Lefèvre <[EMAIL PROTECTED]> - Web: <http://www.vinc17.org/> 100% accessible validated (X)HTML - Blog: <http://www.vinc17.org/blog/> Work: CR INRIA - computer arithmetic / SPACES project at LORIA -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
