Sylvain Sauvage a écrit :
Arnaud Feltz, samedi 2 décembre 2006, 12:34:24 CET
Bonsoir à tous,
^^^^^^^ (à midi ?!)
'jour,
J'aurai aimé savoir comment faire pour installer Lilo à la place de
grub ( que j'utilise actuellement ) :
Pour l'instant j'ai fais:
# apt-get install lilo lilo-config
# liloconfig
puis :
# lilo
Warning: Unable to determine video adapter in use in the present
system. Adding Linux*
Adding Windows
Lorsque je reboot, je suis toujours sur Grub, j'ai fais quelques
recherches sur Internet sans rien trouver de concluant. Quelqu'un
aurait-il saurait-il comment procéder ?
Envoie ton lilo.conf.
Voici mon lilo.conf en pièce jointe.
Merci
# Generated by liloconfig
# This allows booting from any partition on disks with more than 1024
# cylinders.
lba32
# Specifies the boot device
boot=/dev/hda4
# Specifies the device that should be mounted as root.
# If the special name CURRENT is used, the root device is set to the
# device on which the root file system is currently mounted. If the root
# has been changed with -r , the respective device is used. If the
# variable ROOT is omitted, the root device setting contained in the
# kernel image is used. It can be changed with the rdev program.
root=/dev/hda4
# Bitmap configuration for /boot/sarge.bmp
bitmap=/boot/sarge.bmp
bmp-colors=1,,0,2,,0
bmp-table=120p,173p,1,15,17
bmp-timer=254p,432p,1,0,0
# Enables map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the map
# smaller. Using COMPACT is especially recommended when booting from a
# floppy disk.
# compact
# Install the specified file as the new boot sector.
# LILO supports built in boot sectory, you only need
# to specify the type, choose one from 'text', 'menu' or 'bitmap'.
# new: install=bmp old: install=/boot/boot-bmp.b
# new: install=text old: install=/boot/boot-text.b
# new: install=menu old: install=/boot/boot-menu.b or boot.b
# default: 'menu' is default, unless you have a bitmap= line
# Note: install=bmp must be used to see the bitmap menu.
# install=menu
install=bmp
# Specifies the number of _tenths_ of a second LILO should
# wait before booting the first image. LILO
# doesn't wait if DELAY is omitted or if DELAY is set to zero.
# delay=20
# Prompt to use certaing image. If prompt is specified without timeout,
# boot will not take place unless you hit RETURN
prompt
timeout=50
# Specifies the location of the map file. If MAP is
# omitted, a file /boot/map is used.
map=/boot/map
# Specifies the VGA text mode that should be selected when
# booting. The following values are recognized (case is ignored):
# NORMAL select normal 80x25 text mode.
# EXTENDED select 80x50 text mode. The word EXTENDED can be
# abbreviated to EXT.
# ASK stop and ask for user input (at boot time).
# <number> use the corresponding text mode. A list of available modes
# can be obtained by booting with vga=ask and pressing [Enter].
vga=normal
# Defines non-standard parameters for the specified disk.
#disk=/dev/sda
# bios=0x80
# If you are using removable USB drivers (with mass-storage)
# you will need to tell LILO to not use these devices even
# if defined in /etc/fstab and referenced in /proc/partitions.
# Adjust these lines to your devices:
#
# disk=/dev/sda inaccessible
# disk=/dev/sdb inaccessible
# These images were automagically added. You may need to edit something.
image=/boot/vmlinuz-2.6.18.1
label="Lin img0"
read-only
# If you have another OS on this machine (say DOS),
# you can boot if by uncommenting the following lines
# (Of course, change /dev/hda2 to wherever your DOS partition is.)
# other=/dev/hda2
# label="MS Windows"
