Frédéric ZULIAN a écrit :
[...]
Jul 25 13:23:45 localhost kernel: ieee80211: 802.11
data/management/control stack, git-1.1.13
Jul 25 13:23:45 localhost kernel: ieee80211: Copyright (C) 2004-2005
Intel Corporation <[EMAIL PROTECTED]>
Jul 25 13:23:45 localhost kernel: bcm43xx driver

- dmesg après chargement du module par modconf
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[EMAIL PROTECTED]>
bcm43xx driver

- ./networking restart fred:/home/fred# cd /etc/init.d
fred:/etc/init.d# ./networking restart
Reconfiguring network interfaces...SIOCSIFADDR: No such device
Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device wlan0 ; No such device.
SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Failed to bring up wlan0.
done.

-  interfaces

auto eth0
iface eth0 inet static
address 192.168.1.8
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254

auto wlan0
iface wlan0 inet static
address 192.168.1.40
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254
wireless-essid "f1sxo"
#wireless-mode managed
#
Bonjour,

je n'ai pas suivi toute l'histoire mais je possède une carte Linksys, chipset broadcom: soit elle est utilisée avec ndiswrapper et l'interface est wlan0, soit elle est utilisée avec bcm43xx et la pile ieee80211, dans ce cas il s'agit d'une interface ethx

--
Daniel  Huhardeaux       _____ ____ ____ _____ _____ _
enum    +48 22 434 6431 (_  __) _  ) _  (_  __) _  _(_)
iaxtel   1-700-849-6983  / / / // / // / / / / /_/ / /
sip/iax:callto [EMAIL PROTECTED]/_/ ( ___( ___/ /_/ (_/ (_/_/.net    FWD# 422493


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Répondre à