On Sat, May 03, 2008 at 11:33:49PM +0200, Frederic MASSOT wrote : > mahashakti89 a écrit : >> Bonsoir ! >> >> Bon je n'arrive toujours pas à avoir la moindre image avec cette carte >> .... J'ai lu plusieurs docs, demandé sur une liste spécialisée pour les >> bonnes options (card=112 tuner=54) , les bons périphériques sont créés. >>
> Bonjour, > > J'utilise cette carte pour la TNT avec Kaffeine sans problème, les > noyaux récents la détecte automatiquement. > > Voici un extrait de dmesg avec un noyau 2.6.25 : > Linux video capture interface: v2.00 > saa7130/34: v4l2 driver version 0.2.14 loaded > ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 16 (level, low) -> IRQ 16 > saa7133[0]: found at 0000:05:03.0, rev: 209, irq: 16, latency: 64, mmio: > 0xff7ff000 > saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid > [card=112,autodetected] > saa7133[0]: board init: gpio is 40000 > input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4 > saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff > saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff > saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > tuner' 1-004b: chip found @ 0x96 (saa7133[0]) > tda8290 1-004b: setting tuner address to 61 > tda8290 1-004b: type set to tda8290+75a > saa7133[0]: registered device video0 [v4l2] > saa7133[0]: registered device vbi0 > saa7133[0]: registered device radio0 > DVB: registering new adapter (saa7133[0]) > DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 29 -- ok > J'ai la méme chose dans les logs : saa7133[0]: found at 0000:02:0b.0, rev: 209, irq: 23, latency: 64, mmio: 0xfeaff000 saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,insmod option] saa7133[0]: board init: gpio is 0 input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4 logips2pp: Detected unknown logitech mouse model 127 saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tuner 1-004b: chip found @ 0x96 (saa7133[0]) tda8290 1-004b: setting tuner address to 61 input: ImExPS/2 Logitech Explorer Mouse as /class/input/input5 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] tuner 1-004b: type set to tda8290+75a tda8290 1-004b: setting tuner address to 61 tuner 1-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.5 to 64 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: trying to boot from eeprom tda1004x: timeout waiting for DSP ready tda1004x: found firmware revision 0 -- invalid tda1004x: waiting for firmware upload... et à la fin de demesg | more tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision 20 -- ok > Est-ce que tu as téléchargé le firmware "dvb-fe-tda10046.fw" avec la > > commande /usr/src/linux/Documentation/dvb/get_dvb_firmware ? > Oui , mais les logs m'indiquent une firmware revision 20 > Dans /dev/dvb/adapter0/ j'ai : > > crw-rw---- 1 root video 212, 4 mai 3 16:26 demux0 > crw-rw---- 1 root video 212, 5 mai 3 16:26 dvr0 > crw-rw---- 1 root video 212, 3 mai 3 16:26 frontend0 > crw-rw---- 1 root video 212, 7 mai 3 16:26 net0 > > > Au début de la TNT en France les fichiers qui contenait les fréquences > devait être adaptés avec un offset de 167 kHz, maintenant il y a du > avoir des Linuxiens dans ta région qui ont envoyés des correctifs. > > Pour scanner les chaines facilement essaye avec la commande "scan" du > paquet dvb-utils et retourne nous le résultat : > > scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-ta_ville >i scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Auxerre scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Auxerre using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 570000000 0 9 9 3 1 4 0 initial transponder 794000000 0 9 9 3 1 4 0 initial transponder 770000000 0 9 9 3 1 4 0 initial transponder 546000000 0 9 9 3 1 4 0 initial transponder 586000000 0 9 9 3 1 4 0 initial transponder 562000000 0 9 9 3 1 4 0 >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 570000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 794000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 546000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 586000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: >>> 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: >>> 562000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_AUTO:HIERARCHY_NONE >>> (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Bon je pense définitivement à un problème d'antenne ... (??) mahashakti89 Merci à tous ... -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]