Bonjour la liste, Quelqu'un pourrait m'aider à analyser la sortie d'un : # smartctl -a /dev/hda (fichier joint) ?
J'y entrave que dalle ... Merci. Jean Marc
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ATA III family Device Model: ST320414A Serial Number: 3EC08W8T Firmware Version: 3.28 User Capacity: 20 020 396 032 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Aug 19 20:56:21 2008 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 422) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 17) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000e 057 053 025 Old_age Always - 32473688 3 Spin_Up_Time 0x0002 076 070 000 Old_age Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 182 5 Reallocated_Sector_Ct 0x0032 100 100 036 Old_age Always - 0 7 Seek_Error_Rate 0x000e 086 060 030 Old_age Always - 464098880 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 24825 10 Spin_Retry_Count 0x0012 100 099 097 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2949 194 Temperature_Celsius 0x0022 034 048 000 Old_age Always - 34 195 Hardware_ECC_Recovered 0x001a 063 054 000 Old_age Always - 161356587 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 36496 200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 149 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 149 occurred at disk power-on lifetime: 22413 hours (933 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 da 0d f9 e1 Error: ICRC, ABRT at LBA = 0x01f90dda = 33099226 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 da 0d f9 e1 00 01:42:18.599 READ DMA ca 00 08 ba 82 e5 e1 00 01:42:18.547 WRITE DMA ca 00 08 61 bb b9 e1 00 01:42:18.547 WRITE DMA ca 00 10 4a 84 41 e2 00 01:42:18.546 WRITE DMA ca 00 08 3a 83 41 e2 00 01:42:18.546 WRITE DMA Error 148 occurred at disk power-on lifetime: 22378 hours (932 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 ba 24 d8 e1 Error: ICRC, ABRT at LBA = 0x01d824ba = 30942394 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 ba 24 d8 e1 00 11:49:42.379 READ DMA ca 00 08 22 82 41 e2 00 11:49:37.042 WRITE DMA ca 00 08 32 82 35 e2 00 11:49:37.019 WRITE DMA ca 00 08 62 84 2d e2 00 11:49:37.018 WRITE DMA ca 00 08 1a 82 2d e2 00 11:49:37.003 WRITE DMA Error 147 occurred at disk power-on lifetime: 22338 hours (930 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 58 85 49 e1 Error: ICRC, ABRT at LBA = 0x01498558 = 21595480 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 58 85 49 e1 00 14:17:36.767 READ DMA ca 00 30 ca 53 d2 e1 00 14:17:36.745 WRITE DMA ca 00 10 2a 5f 3f e2 00 14:17:36.718 WRITE DMA c8 00 10 18 85 49 e1 00 14:17:36.714 READ DMA ca 00 08 c2 53 d2 e1 00 14:17:36.695 WRITE DMA Error 146 occurred at disk power-on lifetime: 22232 hours (926 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 0a 96 fa e1 Error: ICRC, ABRT at LBA = 0x01fa960a = 33199626 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 28 0a 96 fa e1 00 09:08:04.743 READ DMA ca 00 58 b2 f6 d1 e1 00 09:08:04.710 WRITE DMA c8 00 28 e2 95 fa e1 00 09:08:04.701 READ DMA ca 00 08 7a 4a f5 e1 00 09:08:04.669 WRITE DMA ca 00 08 82 ca ea e1 00 09:08:04.642 WRITE DMA Error 145 occurred at disk power-on lifetime: 22228 hours (926 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 62 a6 07 e2 Error: ICRC, ABRT at LBA = 0x0207a662 = 34055778 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 18 62 a6 07 e2 00 04:32:01.691 READ DMA ca 00 e8 3a 26 d2 e1 00 04:32:01.661 WRITE DMA c8 00 08 0a 5c 07 e2 00 04:32:01.660 READ DMA c8 00 08 fa 5b 07 e2 00 04:32:01.660 READ DMA c8 00 20 b2 5b 07 e2 00 04:32:01.648 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 24825 - Device does not support Selective Self Tests/Logging
