Le port est ouvert ? (que dit netstat) Ton firewall est off ? (un petit flush) Autre piste(mais j'y crois pas), tu as mis les bons droits/utilisateurs sur les fichiers ? Bab
Le lun. 25 juin 2018 à 15:15, tech <[email protected]> a écrit : > Bonjour. > > > Si SSl désactive, le problème est le meme. > > Si SSl purgé totalement via apt-get purge idem > > > Error: Connection failure: Connection refused > > > rien sur github, la communauté nut semble être en long sommeil ou morte. > Rien non plus en doc -faq ou support sur networkupstools.org > ------------------------------ > *De :* babouchko <[email protected]> > *Envoyé :* lundi 25 juin 2018 15:07:48 > *À :* tech > *Cc :* debian > *Objet :* Re: > > Bonjour, > Et sans SSL ca ne fct pas non plus ? > Je me souviens plus dr l'option maos tu peux ld désactiver dans un premier > temps... > Après, si tu veux utiliser ssl, as tu mis e' place les certificats ? > Bab > > Le lun. 25 juin 2018 à 14:56, tech <[email protected]> a écrit : > >> >> >> Bonjour, >> >> j'ai créé : : https://github.com/networkupstools/nut/issues/563 >> >> >> Je tente d'utiliser un onduleur EATON 850pro via USB sur une Debian >> Stretch Stable. >> J'ai letsencrypt sur cette machine. >> >> Dans les logs j'ai: >> upsmon Can not initialize SSL context >> >> si 850pro est connecté via usb: >> >> lsusb >> Bus 009 Device 003: ID 0463:ffff MGE UPS Systems UPS >> after install nut using apt-get >> apt-get install nut libupsclient1 nut-client nut-server >> upsdrvctl start >> >> Network UPS Tools - UPS driver controller 2.7.4 >> Network UPS Tools - Generic HID driver 0.41 (2.7.4) >> USB communication driver 0.33 >> Using subdriver: MGE HID 1.39 >> nut=standalone >> >> mes confs: >> /etc/nut/ups.conf >> >> [850PRO] >> driver = usbhid-ups >> port = auto >> desc = "850PRO" >> /etc/nut/upsd.conf >> >> STATEPATH /var/run/nut >> MAXCONN 1024 >> # CERTFILE /etc/letsencrypt/live/REDACTED/cert.pem >> CERTPATH /etc/letsencrypt/live/REDACTED/ >> # CERTIDENT "my nut server" "MyPasSw0rD" >> # CERTREQUEST REQUIRE >> # - 0 to not request to clients to provide any certificate >> # - 1 to require to all clients a certificate >> # - 2 to require to all clients a valid certificate >> LISTEN ::1 3493 >> LISTEN 127.0.0.1 3493 >> /etc/nut/upsd.users >> >> #upsmon master >> [admin] >> password = 1401 >> allowfrom = localhost >> upsmon master >> actions = SET >> instcmds = ALL >> /etc/nut/upsmon.conf >> >> MINSUPPLIES 1 >> SHUTDOWNCMD "/sbin/shutdown -h +1" >> POLLFREQ 10 >> POLLFREQALERT 10 >> HOSTSYNC 15 >> DEADTIME 20 >> POWERDOWNFLAG /etc/killpower >> RBWARNTIME 432000 >> NOCOMMWARNTIME 300 >> FINALDELAY 4 >> CERTPATH /etc/letsencrypt/live/REDACTED/ >> # CERTHOST <hostname> <certificate name> <certverify> <forcessl> >> # CERTVERIFY 1 >> # FORCESSL 0 >> MONITOR 850PRO@localhost 1 admin 1401 master >> SHUTDOWNCMD "/sbin/shutdown -h now" >> HOSTSYNC 15 >> POWERDOWNFLAG /etc/nut/killpower >> FINALDELAY 5 >> NOTIFYCMD /sbin/upssched >> NOTIFYMSG ONBATT "%s is on battery" >> NOTIFYMSG ONLINE "%s is back online" >> NOTIFYMSG LOWBATT "%s has a low battery!" >> NOTIFYMSG SHUTDOWN "System is being shutdown!" >> NOTIFYFLAG ONLINE SYSLOG+EXEC >> NOTIFYFLAG ONBATT SYSLOG+EXEC >> NOTIFYFLAG LOWBATT SYSLOG+EXEC >> NOTIFYFLAG FSD SYSLOG+WALL+EXEC >> NOTIFYFLAG COMMOK SYSLOG+EXEC >> NOTIFYFLAG COMMBAD SYSLOG+EXEC >> NOTIFYFLAG SHUTDOWN SYSLOG+EXEC >> NOTIFYFLAG REPLBATT SYSLOG+EXEC >> NOTIFYFLAG NOCOMM SYSLOG+EXEC >> /etc/nut/upssched.conf >> >> LOCKFN /var/lib/nut/upssched.lock >> PIPEFN /var/lib/nut/upssched.pipe >> CMDSCRIPT /bin/upssched-cmd >> AT ONBATT * START-TIMER onbatt1 13 >> AT ONLINE * CANCEL-TIMER onbatt1 >> #AT ONBATT * START-TIMER earlyshutdown 30 >> #AT ONLINE * CANCEL-TIMER earlyshutdown >> AT ONBATT * START-TIMER onbattwarn 30 >> AT ONLINE * CANCEL-TIMER onbattwarn >> when doing: >> /etc/init.d/ups-monitor restart && tail -f /var/log/syslog >> output: >> >> [ ok ] Restarting ups-monitor (via systemctl): ups-monitor.service. >> Jun 19 16:34:54 REDACTED systemd[1]: Stopping LSB: Network UPS Tools >> monitor initscript... >> Jun 19 16:34:55 REDACTED ups-monitor[7377]: Stopping NUT - power device >> monitor and shutdown controller: nut-client. >> Jun 19 16:34:55 REDACTED systemd[1]: Stopped LSB: Network UPS Tools >> monitor initscript. >> Jun 19 16:34:55 REDACTED systemd[1]: Starting LSB: Network UPS Tools >> monitor initscript... >> Jun 19 16:34:55 REDACTED upsmon[7387]: Startup successful >> Jun 19 16:34:55 REDACTED ups-monitor[7382]: Starting NUT - power device >> monitor and shutdown controller: nut-client. >> Jun 19 16:34:55 REDACTED systemd[1]: Started LSB: Network UPS Tools >> monitor initscript. >> Jun 19 16:34:55 REDACTED upsmon[7389]: Init SSL with cerificate database >> located at /etc/letsencrypt/live/REDACTED/ >> Jun 19 16:34:55 REDACTED upsmon[7389]: Can not initialize SSL context >> Jun 19 16:34:55 REDACTED upsmon[7387]: upsmon parent: read >> status give: >> >> /etc/init.d/ups-monitor status >> ● ups-monitor.service - LSB: Network UPS Tools monitor initscript >> Loaded: loaded (/etc/init.d/ups-monitor; generated; vendor preset: >> enabled) >> Active: active (exited) since Tue 2018-06-19 16:34:55 CEST; 2min 18s >> ago >> Docs: man:systemd-sysv-generator(8) >> Process: 7377 ExecStop=/etc/init.d/ups-monitor stop (code=exited, >> status=0/SUCCESS) >> Process: 7382 ExecStart=/etc/init.d/ups-monitor start (code=exited, >> status=0/SUCCESS) >> >> REDACTED systemd[1]: Starting LSB: Network UPS Tools monitor initscript... >> REDACTED upsmon[7387]: Startup successful >> REDACTED ups-monitor[7382]: Starting NUT - power device monitor and >> shutdown contr…lient. >> REDACTED systemd[1]: Started LSB: Network UPS Tools monitor initscript. >> REDACTED upsmon[7389]: Init SSL with cerificate database located at >> /etc/letsencry…/ >> . >> lorque >> upsl -l >> réponse: >> Error: Connection failure: Connection refused >> >> Je suis un peu perdue et j'ai pas d'idée. >> >> >>
