Le mardi 19 mars 2002 � 21:38:42, jerome a �crit:
> Je te remerci, mais ma sourie logitek OEM est tr�s particuli�re mon
> XF86config-4:
>
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/gpmdata"
> Option "Protocol" "IntelliMouse"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
Salut,
Tu dois pouvoir d�terminer le protocole associ� � la fifo gpmdata �
partir de ta config gpm (/etc/gpm.conf ligne repeat_type)
un extrait du man de gpm :
-Rname Causes `gpm' to act as a repeater: any mouse data
received while in graphic mode will be produced on
the fifo `/dev/gpmdata' in protocol name. In prin�
ciple, you can use the same names as for the `-t'
option, although repeating into some protocols may
not be implemented for a while. In addition, you
can specify `raw' as the name, to repeat the mouse
data byte by byte, without any protocol transla�
tion. If name is omitted, it defaults to `msc'.
Using gpm in repeater mode, you can configure the X
server to use its fifo as a mouse device. This
option is useful for bus-mouse owners to override
the single-open limitation. It is also an easy way
to manage those stupid dual-mode mice which force
you to keep the middle button down while changing
video mode. The option is forced on by the `-M'
option.
repeat_type vide -> c'est que tu as configur� plusieurs souris sous
gpm (option -M ...), le protocole utilis� pour la fifo est alors msc
(MouseSystem) sans support de roulette
repeat_type non vide -> assure toi d'avoir choisi un protocole qui
r�p�te les �v�nements roulette (pour avoir la liste des protocoles
et leurs caract�ristiques tape "gpm -t help" ce sont les "wheel is
repeated" qui t'interressent :) )
apr�s, tu as 3 solutions au choix :
1) tu d�sactive le r�p�teur gpm et tu n'utilises pas gpmdata
dans gpm.conf :
repeat_type=
dans ta config X change :
Option "Device" "/dev/psaux"
Option "Protocol" "imPS/2"
2) tu forces le protocole du r�p�teur gpm � une valeur qui va bien
exemple :
dans gpm.conf
repeat_type=imps2
dans ta config X :
Option "Device" "/dev/gpmdata"
Option "Protocol" "imPS/2"
3) tu demandes � gpm de r�p�ter les �v�nements souris de fa�on brute :
dans gpm.conf :
repeat_type=raw
dans ta config X :
Option "Device" "/dev/gpmdata"
Option "Protocol" "???" <- un truc qui ressemble
au champ "type" dans gpm.conf, imPS/2 probablement
En esp�rant que �a t'aide un peu
a+
--
Bast !! -- UIN:20252091
mailto:[EMAIL PROTECTED]
tel:+33682569675
