bonjour,
je viens enfin de recompiler mon noyau avec les options de gravure, j'ai
install� xcdroast, et quand je le lance, il me detecte bien mon graveur
en �mulation scsi et qui fonctionne (j'ai m�me pu effacer un cd rw) mais
il ne detecte pas mon lecteur cd, difficile de copier des cd dans ce cas
l�. Pourtant, j'arrive bien a monter un cd.
Merci d'avance
yoann
Graveur Memorex SixteenMAX1040
Lecteur LG 52X max
debian sarge kernel 2.4.19
# cat /etc/fstab
[...]
# cdrom
/dev/hdb /cdrom iso9660 ro,user,noauto 0 0
# graveur
/dev/sr0 /grav iso9660 ro,user,noauto 0 0
[...]
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
# dmesg
Linux version 2.4.19 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian
prerelease)) #4 SMP mer oct 30 11:20:09 CET 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Woody-2.4.19 ro root=30a hdc=ide-scsi
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
[...]
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfb2f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver v1.1.22 [Flags: R/O]
parport0: PC-style at 0x378 [PCSPP(,...)]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
N_HDLC line discipline registered.
lp0: using parport0 (polling).
lp0: console ready
ppdev: user-space parallel port driver
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: detected chipset, but driver not compiled in!
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
HPT370A: IDE controller on PCI bus 00 dev 48
HPT370A: detected chipset, but driver not compiled in!
PCI: Found IRQ 11 for device 00:09.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
hda: IC35L080AVVA07-0, ATA DISK drive
hdb: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
hdc: Memorex SixteenMAXX 1040, ATAPI CD/DVD-ROM drive
hde: IC35L040AVER07-0, ATA DISK drive
hdf: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hdg: IBM-DJNA-371800, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd800-0xd807,0xdc02 on irq 11
ide3 at 0xe000-0xe007,0xe402 on irq 11
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=10011/255/63
hde: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63
hdg: 35239680 sectors (18043 MB) w/1966KiB Cache, CHS=34960/16/63, UDMA(33)
hdb: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99.newide
hdf: No disk in drive
hdf: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13
hda14 hda15 hda16 hda17 hda18 hda19 hda20 hda21 >
hde: [PTBL] [5005/255/63] hde1 < hde5 hde6 hde7 hde8 hde9 > hde2
hdg: [PTBL] [2193/255/63] hdg1 hdg2 < hdg5 hdg6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 9 for device 00:0f.0
eth0: RealTek RTL-8029 found at 0xec00, IRQ 9, 00:50:BF:58:11:A4.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xd0000000
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Vendor: Memorex Model: SixteenMAXX 1040 Rev: TWS1
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[...]
hdb: irq timeout: status=0xd0 { Busy }
hdb: ATAPI reset complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ide-scsi: hdc: unsupported command in request queue (0)
end_request: I/O error, dev 16:00 (hdc), sector 64
isofs_read_super: bread failed, dev=16:00, iso_blknum=16, block=32
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
attempt to access beyond end of device
0b:00: rw=0, want=33, limit=2
isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=32
VFS: busy inodes on changed media.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
__________________________________________________________________
Haut D�bit: Modem offert soit 150,92 euros rembours�s sur le Pack eXtense de
Wanadoo !
Profitez du Haut D�bit � partir de 30 euros/mois :
http://www.ifrance.com/_reloc/w
