Bonsoir,
Malgr� des recherches sur le web, je ne parviens pas � "mounter" le
graveur:
debian:/# mount -t iso9660 /dev/sr0 /graveur
mount: block device /dev/sr0 is write-protected, mounting read-only
mount: Aucun medium trouv�
Ci-joint:
1- /etc/fstab
debian:/# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/hdb1 / ext3 errors=remount-ro 0 1
/dev/hdb5 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy auto user,noauto 0 0
/dev/hdc /cdrom iso9660 ro,user,noauto 0 0
/dev/sr0 /graveur iso9660 ro,user,noauto 0
0
/dev/hdb6 /usr ext3 defaults 0 2
/dev/hdb7 /var ext3 defaults 0 2
/dev/hdb8 /home ext3 defaults 0 2
debian:/#
2- dmesg:
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: CD-RW GCE-8160B Rev: 2.01
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
3- /boot/config-2.4.18-bf2.4
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
4-cdrecord -scanbus:
debian:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus0:
0,0,0 0) 'HL-DT-ST' 'CD-RW GCE-8160B ' '2.01' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
5- le lien symbolique:
debian:~# ls -l /dev/graveur
lrwxrwxrwx 1 root root 8 mai 21 21:59 /dev/graveur ->
/dev/sr0
6-lsmod:
sg 24452 0
ide-scsi 7488 0
7- /etc/modutils/graveur
debian:/# cat /etc/modutils/graveur
alias sr0 sr_mod
alias scd0 sr_mod
alias scd1 sr_mod
alias scd2 sr_mod
alias scd3 sr_mod
pre-install sg modprobe ide-scsi
pre-install sr_mod modprobe ide-scsi
O� se situe mes erreurs ?
Un grand merci pour vos r�ponses, car l�,je bloque.
Philippe
