Bonjour, J'essaie en vain depuis quelques jours d'envoyer un simple fichier .txt sous forme de fax via efax (sous Debian 3.0 et modem Olitec Speed'Com V92 Ready).
J'utilise la commande suivante : # efax -t Tnum�ro_du_fax test.txt La transmission se d�roule parfaitement et je re�ois bien un fax en aval mais il est tout-�-fait illisible. J'ai aussi fait des essais en passant d'abord par l'utilitaire efix mais avec les m�mes r�sultats. Ci-dessous un log d�taill� d'une transmission (je n'y d�tecte rien de suspect...) Si quelqu'un a d�j� eu plus de succ�s avec efax, je serai heureux de l'entendre � ce sujet... Bernard > efax: Thu May 22 21:04:18 2003 efax v 0.9a-001114 Copyright 1999 Ed Casas > efax: Thu May 22 21:04:18 2003 efax v 0.9a-001114 Copyright 1999 Ed Casas > efax: 04:18 compiled Feb 20 2002 15:22:34 > efax: 04:18 page 1 : test.txt + 0 : 1728x2287 @ 204x196 dpi TEXT/TEXT > efax: 04:18 argv[0]=efax > efax: 04:18 argv[1]=-v > efax: 04:18 argv[2]=ewincmartfx > efax: 04:18 argv[3]=-t > efax: 04:18 argv[4]=T026108566 > efax: 04:18 argv[5]=test.txt > efax: 04:18 opened /dev/modem > efax: 04:18 command "Q0V1" > efax: 04:18 waiting 2.0 s > efax: 04:18 .366 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:18 command "E0" > efax: 04:18 waiting 5.0 s > efax: 04:18 .476 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:18 command "I3" > efax: 04:18 waiting 5.0 s > efax: 04:18 .586 [<CR><LF>OLITEC Speed'Com V92 Ready<CR><LF>] > efax: 04:18 .596 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:18 command "+FCLASS=?" > efax: 04:18 waiting 5.0 s > efax: 04:18 .726 [<CR><LF>0,1,1.0,2,8,10<CR><LF>] > efax: 04:18 .736 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:18 command "+FCLASS=2" > efax: 04:18 waiting 5.0 s > efax: 04:18 .856 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:18 command "+FMFR?" > efax: 04:18 waiting 5.0 s > efax: 04:18 .976 [<CR><LF>OLITEC <CR><LF>] > efax: 04:18 .986 [<CR><LF>OK<CR><LF>] > efax: 04:18 response "OK" > efax: 04:19 command "+FMDL?" > efax: 04:19 waiting 5.0 s > efax: 04:19 .106 [<CR><LF>V90 <CR><LF>] > efax: 04:19 .116 [<CR><LF>OK<CR><LF>] > efax: 04:19 response "OK" > efax: 04:19 using OLITEC Speed'Com V92 Ready OLITEC V90 in class 2 > efax: 04:19 command "+FCR=1" > efax: 04:19 waiting 5.0 s > efax: 04:19 .236 [<CR><LF>OK<CR><LF>] > efax: 04:19 response "OK" > efax: 04:19 command "+FDIS?" > efax: 04:19 waiting 5.0 s > efax: 04:19 .256 [<CR><LF>0,5,0,2,0,0,0,0<CR><LF>] > efax: 04:19 .256 [<CR><LF>OK<CR><LF>] > efax: 04:19 response "OK" > efax: 04:19 command "+FLID=" "" > efax: 04:19 waiting 5.0 s > efax: 04:19 .296 [<CR><LF>OK<CR><LF>] > efax: 04:19 response "OK" > efax: 04:19 dialing Tnum�ro_de_fax > efax: 04:19 command "DTnum�ro_de_fax" > efax: 04:19 waiting 120.0 s > efax: 04:38 .606 [<CR><LF>+FCON<CR><LF>] > efax: 04:40 .226 [<CR><LF>+FCSI: " DEFAULTCSID"<CR><LF>] > efax: 04:40 .546 [<CR><LF>+FDIS: 1,5,0,2,1,0,0,0<CR><LF>] > efax: 04:40 .656 [<CR><LF>OK<CR><LF>] > efax: 04:40 response "OK" > efax: 04:40 remote ID -> " DEFAULTCSID" > efax: 04:40 connected > efax: 04:40 command "+FDIS=1,5,0,2" > efax: 04:40 waiting 3.1 s > efax: 04:40 .676 [<CR><LF>OK<CR><LF>] > efax: 04:40 response "OK" > efax: 04:40 command "+FDT" > efax: 04:40 waiting 45.0 s > efax: 04:48 .726 [<CR><LF>+FDCS: 1,5,0,2,0,0,0,0<CR><LF>] > efax: 04:48 .736 [<CR><LF>CONNECT<CR><LF>] > efax: 04:48 response "CONNECT" > efax: 04:48 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms > efax: 04:48 padding to 0 bytes/scan line. > efax: 04:48 header:[Thu May 22 21:04:18 2003 P. 1] > efax: 04:48 waiting 30.0 s > efax: 04:50 .046 [<CR><LF>OK<CR><LF>] > efax: 04:50 response "OK" > efax: 04:50 sent 20+64 lines, 1776+0 bytes, 2 s 7104 bps > efax: 04:50 command "+FET=2" > efax: 04:50 waiting 20.0 s > efax: 04:52 .876 [<CR><LF>+FPTS: 1<CR><LF>] > efax: 04:54 .516 [<CR><LF>+FHNG: 0<CR><LF>] > efax: 04:55 .136 [<CR><LF>OK<CR><LF>] > efax: 04:55 response "OK" > efax: 04:55 read value 0 from " 0" > efax: 04:55 sent -> test.txt > efax: 04:55 read value 0 from " 0" > efax: 04:55 command "Q0V1" > efax: 04:55 waiting 2.0 s > efax: 04:55 .247 [<CR><LF>OK<CR><LF>] > efax: 04:55 response "OK" > efax: 04:55 command "H" > efax: 04:55 waiting 5.0 s > efax: 04:55 .356 [<CR><LF>OK<CR><LF>] > efax: 04:55 response "OK" > efax: 04:55 done, returning 0 (success)
