Bonjour,
j'ai r�cup�r� un carte scsi adaptec 1530, et je n'arrive pas � la faire
marcher.
quand je veux charge le driver :
# insmod aha152x irq=9 io=0x340
Using /lib/modules/2.4.20/kernel/drivers/scsi/aha152x.o
/lib/modules/2.4.20/kernel/drivers/scsi/aha152x.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters
Donc j'ai regard� :
#cat /proc/isapnp
Card 1 'ADP3015:Adaptec AHA-1530P' PnP version 1.0 Product version 1.0
Logical device 0 'ADP3015:SCSI Controller'
Supported registers 0x3
Compatible device ADP2015
Device is not active
Active port 0x340
Active IRQ 9 [0x2]
Active memory 0xdc000ff
Resources 0
Priority preferred
IRQ 2/9,10,11,12 High-Edge
Resources 1
Priority preferred
Port 0x340-0x340, align 0x0, size 0x20, 10-bit address decoding
Alternate resources 1:1
Priority acceptable
Port 0x140-0x140, align 0x0, size 0x20, 10-bit address decoding
Resources 2
Priority preferred
Memory 0xc8000-0xdc000, align 0x4000, size 0x4000, cacheable, shadowable,
expansion ROM, 8-bit
Que dire??
Merci pour toute r�ponse :)!
