Bonjour, J'ai des difficult�s a monter un disque externe via la prise firewire. Pourtant j'ai bien les modules ieee1394 ohci1394 et sbp2 mont�s, et un cat /proc/scsi/scsi me donne:
Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: GENESYS Model: Virtual Device Rev: 0.01 Type: Direct-Access ANSI SCSI revision: 02 ainsi que /var/log/messages ieee1394: sbp2: Logged into SBP-2 device ieee1394.agent[3285]: kernel driver sbp2 already loaded scsi singledevice 0 0 1 0 scsi singledevice 0 0 2 0 scsi singledevice 0 0 3 0 scsi singledevice 0 0 4 0 scsi singledevice 0 0 5 0 scsi singledevice 0 0 6 0 scsi singledevice 0 0 7 0 scsi singledevice 1 0 0 0 Vendor: GENESYS Model: Virtual Device Rev: 0.01 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sda: 1 512-byte hdwr sectors (0 MB) /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table scsi singledevice 1 0 1 0 scsi singledevice 1 0 2 0 .... La partition semble illisible et un fdisk /dev/sda donne: Incapable d'ouvrir /dev/sda Que doit on en penser? mon disque est il cuit? Georges
