Bonjour, J'ai un serveur DELL PowerEdge 2600 avec une carte adaptec scsi Ultra160 � 2 canaux, une carte Raid PERC4 megaraid, un lecteur DAT connect� � la carte Adaptec.
J'ai install� une Debian 3.0r0 � partir d'une image ISO r�cup�r�e sur le site http://oregonstate.edu/~kveton/debian (image debian-dell-2.4.23.iso) le noyau de cette image contenant tous les modules compil�s pour le mat�riel ci-dessus. Le tout est bien d�tect� au d�marrage (/var/log/dmesg) : scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 3960D Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 3960D Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs (scsi0:A:6): 80.000MB/s transfers (40.000MHz, offset 32, 16bit) Vendor: ARCHIVE Model: Python 06408-XXX Rev: 9100 Type: Sequential-Access ANSI SCSI revision: 03 megaraid: v2.00.9 (Release Date: Thu Sep 4 17:49:42 EDT 2003) PCI: Found IRQ 11 for device 08:08.0 megaraid: found 0x1028:0x000e:bus 8:slot 8:func 0 scsi2:Found MegaRAID controller at 0xf8825000, IRQ:11 megaraid: [2.37:1.05] detected 1 logical drives. megaraid: supports extended CDBs. megaraid: channel[0] is raid. megaraid: channel[1] is scsi. Malgr� cela, la commande "find /home/test -print|cpio -ocvB > /dev/st0" me retourne un message d'erreur "bash: /dev/st0: Aucun peripherique de ce type" si je lance "modprobe st" ou "modconf st", j'ai les messages d'erreur suivant : /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol __get_free_pages_Rsmp_4784e424 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_do_req_Rsmp_b454e12e /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol __write_lock_failed /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_block_when_processing_errors_Rsmp_44855e67 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_ioctl_Rsmp_df73e6ad /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol complete_Rsmp_136eba7c /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol __generic_copy_to_user_Rsmp_d523fdd3 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_release_request_Rsmp_35a825d8 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol unregister_chrdev_Rsmp_c192d491 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol sprintf_Rsmp_1d26aa98 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_unregister_module_Rsmp_81d85a75 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol schedule_timeout_Rsmp_17d59d01 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol __read_lock_failed /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_allocate_request_Rsmp_5a3778c3 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol register_chrdev_Rsmp_33979a30 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol kfree_Rsmp_037a0cba /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol printk_Rsmp_1b7d4074 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol wait_for_completion_Rsmp_4abe8112 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol free_pages_Rsmp_9941ccb8 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol panic_Rsmp_01075bf0 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol kmalloc_Rsmp_93d4cfe6 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol scsi_register_module_Rsmp_fa20b7b0 /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol __generic_copy_from_user_Rsmp_116166aa /lib/modules/2.4.23/kernel/drivers/scsi/st.o: unresolved symbol print_req_sense_Rsmp_2c7e4bdc /lib/modules/2.4.23/kernel/drivers/scsi/st.o: insmod /lib/modules/2.4.23/kernel/drivers/scsi/st.o failed /lib/modules/2.4.23/kernel/drivers/scsi/st.o: insmod st failed Installation failed. depmod: *** Unresolved symbols in /lib/modules/2.4.23/kernel/drivers/scsi/st.o Si je tape la commande "modinfo st" : filename: /lib/modules/2.4.23/kernel/drivers/scsi/st.o description: "SCSI Tape Driver" author: "Kai Makisara" license: "GPL" parm: buffer_kbs int, description "Default driver buffer size (KB; 32)" parm: max_buffers int, description "Maximum number of buffer allocated at initialisation (4)" parm: max_sg_segs int, description "Maximum number of scatter/gather segments to use (32)" parm: blocking_open int, description "Block in open if not ready an no O_NONBLOCK (0)" Si je tape la commande "lsmod", rien ne s'affiche. C'est normal car les modules (adaptec, megaraid) sont compil�s dans le noyau. Je n'arrive pas � trouver la cause du probl�me et � le r�gler. Avez-vous des id�es pour me sortir de ce mauvais pas ? Merci Christian
