Salut !
J'ai une carte ethernet realtek 10/100Mbps que je n'arrive pas � utiliser en
100. Voici le contexte:
Debian unstable
noyau 2.4.25-1-k7
module 8139too
* ethtool eth0:
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Full
Port: MII
PHYAD: 32
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
* ethtool -s eth0 speed 100:
Aucun message, mais la carte reste � 10.
* ifconfig eth0 media 100baseT:
port: SIOCSIFMAP: Operation not supported
Si vous avez des id�es, je suis preneur.
Merci !
--
Didier Verna, [EMAIL PROTECTED], http://www.lrde.epita.fr/~didier
EPITA / LRDE, 14-16 rue Voltaire Tel.+33 (1) 44 08 01 85
94276 Le Kremlin-Bic�tre, France Fax.+33 (1) 53 14 59 22 [EMAIL PROTECTED]
