Bonjour,
je viens d'acqu�rir une carte tuner tv hauppage WinTV express ( chipset
bt878). Toute la configuration du noyeau et des softs (bttv, i2c, xawtv..)
semble bien ce pass�e. Quand je lance xawtv j'obtients bien les diff�rentes
cha�nes mais elles sont affreusement m�ches (l'image est compl�tement
defform�e, les couleurs invers�es...) . Je ne sais plus trop quoi faire d'o�
ce mail .....
Je mets ici les choses "utiles" :
-v4l-conf
dga: version 2.0
mode: 1024x768, depth=24, bpp=32, bpl=4096, base=0xd0000000
/dev/video0 [v4l2]: ioctl VIDIOC_QUERYCAP: Invalid argument
/dev/video0 [v4l]: configuration done
-dmesg
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 01:08.0, irq: 11, latency: 32, mmio: 0xde000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,insmod option]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=44806, tuner=Temic 4046FM5 (22), radio=no
bttv0: using tuner=22
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5))
i2c-core.o: client [Temic PAL/SECAM multi (4046 FM5] registered to adapter
[bt848 #0](pos. 0).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
