<extrait> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0f.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x1000. Vers LK1.1.16 00:0f.0: Media override to transceiver type 0 (10baseT). eth0: Media override to transceiver 0 (10baseT). </extrait>
Tu es en 10 ou 100mb/s ? peut etre qu'il faut le forcer si tu n'es pas en 10mb/s. Nooks On Fri, Jun 18, 2004 at 12:05:32PM -0400, David St-Onge wrote: > > J'ai lu la doc sur le site de debian, et sur quelques autres...tout mes > settings me sembles corrects...je suis absolument certain de la configuration > de /etc/network/interfaces (ip static) et de resolv.conf. puisque je les ait > copi�s de mon ancien red hat o� le r�seau fonctionnait. > > J'ai joint les message de dmesg et modprobe -c...en esp�rant que cela soit > utile. > > Merci de me donner un coup de main!# > > David > Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 > (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) > BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data) > BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS) > BIOS-e820: 00000000fffe7400 - 0000000100000000 (reserved) > On node 0 totalpages: 65520 > zone(0): 4096 pages. > zone(1): 61424 pages. > zone(2): 0 pages. > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Kernel command line: auto BOOT_IMAGE=Linux ro root=302 > Initializing CPU#0 > Detected 348.490 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 694.68 BogoMIPS > Memory: 254640k/262080k available (1783k kernel code, 7052k reserved, 549k > data, 280k init, 0k highmem) > Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) > Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) > Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > Page-cache hash table entries: 65536 (order: 6, 262144 bytes) > CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 512K > CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 > CPU: Common caps: 0183fbff 00000000 00000000 00000000 > CPU: Intel Pentium II (Deschutes) stepping 01 > Enabling fast FPU save and restore... done. > Checking 'hlt' instruction... OK. > Checking for popad bug... OK. > POSIX conformance testing by UNIFIX > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 348.4816 MHz. > ..... host bus clock speed is 99.5659 MHz. > cpu: 0, clocks: 995659, slice: 497829 > CPU0<T0:995648,T1:497808,D:11,S:497829,C:995659> > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=1 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > Limiting direct PCI/PCI transfers. > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > VFS: Diskquotas version dquot_6.4.0 initialized > Journalled Block Device driver loaded > vga16fb: initializing > vga16fb: mapped to 0xc00a0000 > Console: switching to colour frame buffer device 80x30 > fb0: VGA16 VGA frame buffer device > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI > enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10e > block: 128 slots per queue, batch=32 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1060-0x1067, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1068-0x106f, BIOS settings: hdc:DMA, hdd:pio > hda: QUANTUM FIREBALL EL10.2A, ATA DISK drive > hdc: NEC CD-ROM DRIVE:288, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=1247/255/63 > hdc: ATAPI 24X CD-ROM drive, 128kB Cache > Uniform CD-ROM driver Revision: 3.12 > ide-floppy driver 0.97.sv > Partition check: > hda: hda1 hda2 hda3 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > Loading I2O Core - (c) Copyright 1999 Red Hat Software > I2O configuration manager v 0.04. > (C) Copyright 1999 Red Hat Software > loop: loaded (max 8 devices) > Compaq CISS Driver (v 2.4.5) > HDLC support module revision 1.02 for Linux 2.4 > Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 > Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. > ide-floppy driver 0.97.sv > Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found > Highpoint HPT370 Softwareraid driver for linux version 0.01 > No raid array found > SCSI subsystem driver Revision: 1.00 > Red Hat/Adaptec aacraid driver, Apr 14 2002 > DC390: 0 adapters found > 3ware Storage Controller device driver for Linux v1.02.00.016. > 3w-xxxx: No cards with valid units found. > request_module[scsi_hostadapter]: Root fs not mounted > request_module[scsi_hostadapter]: Root fs not mounted > i2o_scsi.c: Version 0.0.1 > chain_pool: 0 bytes @ c1404e20 > (512 byte buffers X 4 can_queue X 0 i2o controllers) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 2048 buckets, 16Kbytes > TCP: Hash tables configured (established 16384 bind 16384) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 280k freed > Adding Swap: 522104k swap-space (priority -1) > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 9 for device 00:07.2 > usb-uhci.c: USB UHCI at I/O 0x1040, IRQ 9 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usb.c: registered new driver keyboard > usbkbd.c: :USB HID Boot Protocol keyboard driver > PCI: Found IRQ 11 for device 00:0f.0 > 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html > 00:0f.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x1000. Vers LK1.1.16 > 00:0f.0: Media override to transceiver type 0 (10baseT). > eth0: Media override to transceiver 0 (10baseT). > Linux PCMCIA Card Services 3.1.33 > kernel build: 2.4.18-bf2.4 unknown > options: [pci] [cardbus] [apm] > Intel ISA/PCI/CardBus PCIC probe: > no bridges found. > ds: no socket drivers loaded! > VFS: Disk change detected on device fd(2,0) > # Generated by modprobe -c (2.4.15) > path[boot]=/lib/modules/boot > path[toplevel]=/lib/modules/2.4.18-bf2.4 > path[toplevel]=/lib/modules/2.4 > path[kernel]=/lib/modules/kernel > path[fs]=/lib/modules/fs > path[net]=/lib/modules/net > path[scsi]=/lib/modules/scsi > path[block]=/lib/modules/block > path[cdrom]=/lib/modules/cdrom > path[ipv4]=/lib/modules/ipv4 > path[ipv6]=/lib/modules/ipv6 > path[sound]=/lib/modules/sound > path[fc4]=/lib/modules/fc4 > path[video]=/lib/modules/video > path[misc]=/lib/modules/misc > path[pcmcia]=/lib/modules/pcmcia > path[atm]=/lib/modules/atm > path[usb]=/lib/modules/usb > path[ide]=/lib/modules/ide > path[ieee1394]=/lib/modules/ieee1394 > path[mtd]=/lib/modules/mtd > # Prune > prune modules.dep > prune modules.generic_string > prune modules.pcimap > prune modules.isapnpmap > prune modules.usbmap > prune modules.parportmap > prune modules.ieee1394map > prune modules.pnpbiosmap > prune System.map > prune .config > prune build > prune vmlinux > prune vmlinuz > prune bzImage > prune zImage > prune .rhkmvtag > # Aliases > alias binfmt-0000 off > alias binfmt-204 binfmt_aout > alias binfmt-263 binfmt_aout > alias binfmt-264 binfmt_aout > alias binfmt-267 binfmt_aout > alias binfmt-387 binfmt_aout > alias binfmt-332 iBCS > alias binfmt--310 binfmt_java > alias block-major-1 rd > alias block-major-2 floppy > alias block-major-3 ide-probe-mod > alias block-major-7 loop > alias block-major-8 sd_mod > alias block-major-9 md > alias block-major-11 sr_mod > alias block-major-13 xd > alias block-major-15 cdu31a > alias block-major-16 gscd > alias block-major-17 optcd > alias block-major-18 sjcd > alias block-major-20 mcdx > alias block-major-22 ide-probe-mod > alias block-major-23 mcd > alias block-major-24 sonycd535 > alias block-major-25 sbpcd > alias block-major-26 sbpcd > alias block-major-27 sbpcd > alias block-major-29 aztcd > alias block-major-32 cm206 > alias block-major-33 ide-probe-mod > alias block-major-34 ide-probe-mod > alias block-major-37 ide-tape > alias block-major-44 ftl > alias block-major-46 pcd > alias block-major-47 pf > alias block-major-56 ide-probe-mod > alias block-major-57 ide-probe-mod > alias block-major-58 lvm-mod > alias block-major-88 ide-probe-mod > alias block-major-89 ide-probe-mod > alias block-major-90 ide-probe-mod > alias block-major-91 ide-probe-mod > alias block-major-93 nftl > alias block-major-97 pg > alias char-major-4 serial > alias char-major-5 serial > alias char-major-6 lp > alias char-major-9 st > alias char-major-10 off > alias char-major-10-0 busmouse > alias char-major-10-1 off > alias char-major-10-2 msbusmouse > alias char-major-10-3 atixlmouse > alias char-major-10-130 wdt > alias char-major-10-131 wdt > alias char-major-10-135 rtc > alias char-major-10-139 openprom > alias char-major-10-144 nvram > alias char-major-10-157 applicom > alias char-major-10-175 agpgart > alias char-major-10-184 microcode > alias char-major-14 soundcore > alias char-major-19 cyclades > alias char-major-20 cyclades > alias char-major-21 sg > alias char-major-22 pcxx > alias char-major-23 pcxx > alias char-major-27 ftape > alias char-major-34 scc > alias char-major-35 tclmidi > alias char-major-36 netlink > alias char-major-37 ide-tape > alias char-major-48 riscom8 > alias char-major-49 riscom8 > alias char-major-57 esp > alias char-major-58 esp > alias char-major-63 kdebug > alias char-major-90 mtdchar > alias char-major-96 pt > alias char-major-99 ppdev > alias char-major-107 3dfx > alias char-major-108 ppp_generic > alias char-major-109 lvm-mod > alias char-major-161 ircomm-tty > alias dos msdos > alias dummy0 dummy > alias dummy1 dummy > alias eth0 off > alias iso9660 isofs > alias md-personality-1 linear > alias md-personality-2 raid0 > alias md-personality-3 raid1 > alias md-personality-4 raid5 > alias net-pf-1 unix > alias net-pf-2 ipv4 > alias net-pf-3 off > alias net-pf-4 ipx > alias net-pf-5 appletalk > alias net-pf-6 off > alias net-pf-10 off > alias net-pf-17 af_packet > alias net-pf-19 off > alias netalias-2 ip_alias > alias plip0 plip > alias plip1 plip > alias tunl0 ipip > alias cipcb0 cipcb > alias cipcb1 cipcb > alias cipcb2 cipcb > alias cipcb3 cipcb > alias ppp0 ppp > alias ppp1 ppp > alias scsi_hostadapter off > alias slip0 slip > alias slip1 slip > alias tty-ldisc-1 slip > alias tty-ldisc-3 ppp_async > alias tty-ldisc-11 irtty > alias tty-ldisc-14 ppp_synctty > alias ppp-compress-18 ppp_mppe > alias ppp-compress-21 bsd_comp > alias ppp-compress-24 ppp_deflate > alias ppp-compress-26 ppp_deflate > alias parport_lowlevel parport_pc > alias usbdevfs usbcore > alias char-major-10-200 tun > alias char-major-81 bttv > alias /dev/ppp ppp_generic > alias loop-xfer-gen-0 loop_gen > alias loop-xfer-3 loop_fish2 > alias loop-xfer-gen-10 loop_gen > alias cipher-2 des > alias cipher-3 fish2 > alias cipher-4 blowfish > alias cipher-6 idea > alias cipher-7 serp6f > alias cipher-8 mars6 > alias cipher-11 rc62 > alias cipher-15 dfc2 > alias cipher-16 rijndael > alias cipher-17 rc5 > alias /dev/tts serial > alias /dev/tts/0 serial > alias /dev/tts/1 serial > alias /dev/tts/2 serial > alias /dev/tts/3 serial > alias binfmt-0064 binfmt_aout > # Options > options dummy0 -o dummy0 > options dummy1 -o dummy1 > options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 > options 3c59x debug=1 options=0 > # Commands > post-install bttv insmod tuner > post-remove bttv rmmod tuner > post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null > pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null > # Miscellaneous file and directory names > generic_stringfile=/lib/modules/2.4.18-bf2.4/modules.generic_string > pcimapfile=/lib/modules/2.4.18-bf2.4/modules.pcimap > isapnpmapfile=/lib/modules/2.4.18-bf2.4/modules.isapnpmap > usbmapfile=/lib/modules/2.4.18-bf2.4/modules.usbmap > parportmapfile=/lib/modules/2.4.18-bf2.4/modules.parportmap > ieee1394mapfile=/lib/modules/2.4.18-bf2.4/modules.ieee1394map > pnpbiosmapfile=/lib/modules/2.4.18-bf2.4/modules.pnpbiosmap > depfile=/lib/modules/2.4.18-bf2.4/modules.dep > persistdir=/var/lib/modules/persist
