> 1: Je tente de monter une image iso : > ultimate:~# ultimate:~# mount > /home/guy/download/debian-30r2-i386-binary-1_NONUS.iso -t iso9660 -o > loop,ro /mnt/disk > -bash: ultimate:~#: command not found > ultimate:~# mount: N'est pas un r�pertoire > Pourquoi ? le rep /mnt/disk existe evidement et est meme en chmod 777 > de plus je tente sous root
C'est plutot ca la syntaxe: mount -o loop -t iso9660 /home/guy/download/debian-30r2-i386-binary-1_NONUS.iso /mnt/disk > 2:Je tente de graver l'image iso > ultimate:~# cdrecord -v -dao speed=4 dev=1,0,0 > /home/guy/download/debian-30r2-i386-binary-1_NONUS.iso > Cdrecord-Clone 2.01a29 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg > Schilling > NOTE: this version of cdrecord is an inofficial (modified) release of > cdrecord > and thus may have bugs that are not present in the original version. > Please send bug reports and support requests to > <[EMAIL PROTECTED]>. > The original author should not be bothered with problems of this > version. > > TOC Type: 1 = CD-ROM > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.8'. > SCSI buffer size: 64512 > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 1 > Vendor_info : 'HP ' > Identifikation : 'CD-Writer+ 8100 ' > Revision : '1.0g' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC SWABAUDIO > Supported modes: TAO PACKET SAO > Drive buf size : 1040128 = 1015 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 0 MB > Total size: 0 MB (00:05.08) = 381 sectors > Lout start: 1 MB (00:07/06) = 381 sectors > Current Secsize: 2048 > ATIP start of lead in: -11634 (97:26/66) > ATIP start of lead out: 359846 (79:59/71) > Disk type: Short strategy type (Phthalocyanine or similar) > Manuf. index: 3 > Manufacturer: CMC Magnetics Corporation > Blocks total: 359846 Blocks current: 359846 Blocks remaining: 359465 > Starting to write CD/DVD at speed 4 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > Performing OPC... > Sending CUE sheet... > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > Writing pregap for track 1 at -150 > Starting new track at sector: 0 > Track 01: 0 of 0 MB written. > WARNING: padding up to secsize. > Track 01: Total bytes read/written: 779956/780288 (381 sectors). > Writing time: 41.755s > Average write speed 0.1x. > Fixating... > Fixating time: 34.103s > cdrecord: fifo had 13 puts and 13 gets. > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > et evidement le cd est foireux pourquoi ? je sent que c'est pas mon jour. > Guy > > > -- > Pensez � lire la FAQ de la liste avant de poser une question : > http://wiki.debian.net/?DebianFrench > > Pensez � rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:" > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > -- Dominique Arpin_______________________[ Espace administrateur r�seau Courbe ] http://www.espacecourbe.com/ t�l�phone 514.933.9861 t�l�copieur 514.933.9546
