bonjour a toutes et a tous, On Sun, Nov 28, 2004 at 08:04:53PM +0100, pierre wrote: > j'ai un canon powershot S1 Is > qui fonctionne bien sous mdk10, mais je n'arrive pas à y accéder sous > sarge. Je ne sais pas quel device il utilise
j'utilise hotplug voila comment je fais : * je branche, * /var/log/messages (ou /var/log/kern.log) : Nov 28 17:45:43 ile kernel: hub.c: new USB device 00:07.2-1.2, assigned address 4 Nov 28 17:45:43 ile kernel: usb.c: USB device 4 (vend/prod 0x54c/0x10) is not claimed by any active driver. Nov 28 17:45:48 ile kernel: Initializing USB Mass Storage driver... Nov 28 17:45:48 ile kernel: usb.c: registered new driver usb-storage Nov 28 17:45:48 ile kernel: scsi2 : SCSI emulation for USB Mass Storage devices Nov 28 17:45:48 ile kernel: Vendor: Sony Model: Sony DSC Rev: 4.50 Nov 28 17:45:48 ile kernel: Type: Direct-Access ANSI SCSI revision: 02 Nov 28 17:45:48 ile kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0 Nov 28 17:45:48 ile kernel: SCSI device sdc: 253696 512-byte hdwr sectors (130 MB) Nov 28 17:45:48 ile kernel: sdc: Write Protect is off Nov 28 17:45:48 ile kernel: /dev/scsi/host2/bus0/target0/lun0: p1 Nov 28 17:45:48 ile kernel: USB Mass Storage support registered. Nov 28 17:45:48 ile usb.agent[3210]: usb-storage: loaded successfully Nov 28 17:47:13 ile kernel: usb-uhci.c: interrupt, status 3, frame# 758 * je lis : Nov 28 17:45:48 ile kernel: SCSI device sdc: 253696 512-byte hdwr * je monte : mount -t vfat /dev/sdc1 /mnt/ * je recopie, ... * je n'oublie pas de demonter, * je debranche, * /var/log/messages : Nov 28 17:49:39 ile kernel: usb.c: USB disconnect on device 00:07.2-1.2 address 4 -- Philippe BOURCIER http://bourcier.philippe.online.fr/
