Le Fri, 24 Dec 2004 19:40:08 +0100, Glennie Vignarajah a �crit�:

> Annabelle D. a �crit: 
> 
>> Bonjour la liste,
> 
> Salut,
> 
>> Voil�, j'ai install� r�cemment un nouveau disk dur dans un rack
>> IDE. Je l'ai partag� en 2 partitions : hdc1 = Linux/ReiserFS et
>> hdc2= Windows/FAT32. 
> 
>> Or je ne sais 
>> pas comment r�cup�rer cette info ! La partition �tant la premi�re,
>> je met 0 ??

cat check_20041218.log
Zero bit found in on-disk bitmap after the last valid bit.
bad_internal: vpf-10330: block 64971, item 56: The internal item points to the 
not legal block (7077888)
 the problem in the internal node occured (64971), whole subtree is skipped
vpf-10640: The on-disk and the correct bitmaps differs.


>> Lorsque je lance un cfdisk sur /dev/hdc il me fait une erreur dans
>> la table des partitions donc je ne peux pas voir les partitions.
>  
>  Quel est le message d'erreur exacte?

le cfdisk ne me fait plus d'erreur !? (entre temps j'ai chang� de carte
m�re et donc recompil� le noyau)
mais je ne peux toujours pas monter la partition :'(

reiserfsck --check --logfile check_20041231.log /dev/hdc1
reiserfsck 3.6.19 (2003 www.namesys.com)

*************************************************************
** If you are using the latest reiserfsprogs and  it fails **
** please  email bug reports to [email protected], **
** providing  as  much  information  as  possible --  your **
** hardware,  kernel,  patches,  settings,  all reiserfsck **
** messages  (including version),  the reiserfsck logfile, **
** check  the  syslog file  for  any  related information. **
** If you would like advice on using this program, support **
** is available  for $25 at  www.namesys.com/support.html. **
*************************************************************

Will read-only check consistency of the filesystem on /dev/hdc1
Will put log info to 'check_20041231.log'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes

reiserfs_open: the reiserfs superblock cannot be found on /dev/hdc1.
Failed to open the filesystem.

If the partition table has not been changed, and the partition is
valid  and  it really  contains  a reiserfs  partition,  then the
superblock  is corrupted and you need to run this utility with
--rebuild-sb.

> Essayez avec sfdisk --list /dev/hdc !

sfdisk --list /dev/hdc

Disque /dev/hdc: 20023 cylindres, 255 t�tes, 63 secteurs/piste
Unit�s= cylindres de 8225280 octets, blocs de 1024 octets, d�compte � partir de 0

   P�riph Amor D�but     Fin   #cyls    #blocs    Id  Syst�me
/dev/hdc1          0+   9725    9726-  78124063+  83  Linux
/dev/hdc2       9726   20022   10297   82710652+   c  W95 FAT32 (LBA)
/dev/hdc3          0       -       0          0    0  Vide
/dev/hdc4          0       -       0          0    0  Vide


Alors je tente un reiserfsck --rebuild-sb /dev/hdc1 ?

reiserfsck --rebuild-sb --logfile rebuild_sb_20041231.log /dev/hdc1
reiserfsck 3.6.19 (2003 www.namesys.com)

*************************************************************
** If you are using the latest reiserfsprogs and  it fails **
** please  email bug reports to [email protected], **
** providing  as  much  information  as  possible --  your **
** hardware,  kernel,  patches,  settings,  all reiserfsck **
** messages  (including version),  the reiserfsck logfile, **
** check  the  syslog file  for  any  related information. **
** If you would like advice on using this program, support **
** is available  for $25 at  www.namesys.com/support.html. **
*************************************************************

Will check superblock and rebuild it if needed
Will put log info to 'rebuild_sb_20041231.log'

Do you want to run this program?[N/Yes] (note need to type Yes if you do):Yes

reiserfs_open: the reiserfs superblock cannot be found on /dev/hdc1.

what the version of ReiserFS do you use[1-4]
        (1)   3.6.x
        (2) >=3.5.9 (introduced in the middle of 1999) (if you use linux 2.2, 
choose this one)
        (3) < 3.5.9 converted to new format (don't choose if unsure)
        (4) < 3.5.9 (this is very old format, don't choose if unsure)
        (X)   exit
1

Enter block size [4096]:


l� je sais pas koi mettre :'(

Merci pour votre aide :)


PS: D�sol�e de reprendre ce thread si tard mais entre temps j'ai
accouch� (le 25 d�c !!) alors j'ai pas pu m'occuper de mon pc que je
viens de rallumer aujourd'hui, mon fr�re ayant chang� la carte m�re
entre temps ;)

-- 
@++

Annabelle 

Répondre à