Guten Abend, ich hatte das Problem auch und habs durch ein update die f�r ppp zust�ndig sind gel�st.
MfG Andreas ----- Original Message ----- From: "Wolfgang Pausch" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Friday, February 22, 2002 5:30 PM Subject: PPP > Hallo, > > ich habe bisher den Kernel 2.2.18 ben�tzt und habe mir jetzt den Kernel > 2.4.17 > compiliert. > Allerdings habe ich jetzt folgendes Problem: > Wenn ich mit Kernel 2.2.18 boote, funktioniert ppp problemlos. > Wenn ich mit Kernel 2.4.17 boote und pon starte, w�hlt das Modem zwar, > aber nach > einigen Piepst�nen wird die Verbindung wieder unterbrochen. > > In der syslog steht dann folgendes: > > Feb 22 15:23:59 schneebaum pppd[383]: pppd 2.3.11 started by root, uid 0 > Feb 22 15:24:00 schneebaum chat[384]: abort on (BUSY) > Feb 22 15:24:00 schneebaum chat[384]: abort on (NO CARRIER) > Feb 22 15:24:00 schneebaum chat[384]: abort on (VOICE) > Feb 22 15:24:00 schneebaum chat[384]: abort on (NO DIALTONE) > Feb 22 15:24:00 schneebaum chat[384]: abort on (NO DIAL TONE) > Feb 22 15:24:00 schneebaum chat[384]: abort on (NO ANSWER) > Feb 22 15:24:00 schneebaum chat[384]: send (ATX3^M) > Feb 22 15:24:00 schneebaum chat[384]: expect (OK) > Feb 22 15:24:00 schneebaum chat[384]: ATX3^M^M > Feb 22 15:24:00 schneebaum chat[384]: OK > Feb 22 15:24:00 schneebaum chat[384]: -- got it > Feb 22 15:24:00 schneebaum chat[384]: send (ATDT0019102244^M) > Feb 22 15:24:00 schneebaum chat[384]: expect (CONNECT) > Feb 22 15:24:00 schneebaum chat[384]: ^M > Feb 22 15:24:25 schneebaum modprobe: modprobe: Can't locate module > char-major-6 > Feb 22 15:24:34 schneebaum chat[384]: ATDT0019102244^M^M > Feb 22 15:24:34 schneebaum chat[384]: CONNECT > Feb 22 15:24:34 schneebaum chat[384]: -- got it > Feb 22 15:24:34 schneebaum chat[384]: send (\d) > Feb 22 15:24:35 schneebaum pppd[383]: Serial connection established. > Feb 22 15:24:35 schneebaum pppd[383]: Couldn't attach tty to PPP unit 0: > Invalid > argument > Feb 22 15:24:35 schneebaum pppd[383]: Hangup (SIGHUP) > Feb 22 15:24:35 schneebaum pppd[383]: Exit. > > Es sind au�erdem noch mehr solche Zeilen der Bauart "modprobe: Can't > locate module > XXX" drin, egal mit welchem Kernel. > > Zum Vergleich, was mit dem alten Kernel drin steht: > > Feb 22 17:02:24 schneebaum pppd[350]: pppd 2.4.1 started by root, uid 0 > Feb 22 17:02:25 schneebaum chat[351]: abort on (BUSY) > Feb 22 17:02:25 schneebaum chat[351]: abort on (NO CARRIER) > Feb 22 17:02:25 schneebaum chat[351]: abort on (VOICE) > Feb 22 17:02:25 schneebaum chat[351]: abort on (NO DIALTONE) > Feb 22 17:02:25 schneebaum chat[351]: abort on (NO DIAL TONE) > Feb 22 17:02:25 schneebaum chat[351]: abort on (NO ANSWER) > Feb 22 17:02:25 schneebaum chat[351]: send (ATX3^M) > Feb 22 17:02:25 schneebaum chat[351]: expect (OK) > Feb 22 17:02:25 schneebaum chat[351]: ATX3^M^M > Feb 22 17:02:25 schneebaum chat[351]: OK > Feb 22 17:02:25 schneebaum chat[351]: -- got it > Feb 22 17:02:25 schneebaum chat[351]: send (ATDT0019102244^M) > Feb 22 17:02:26 schneebaum chat[351]: expect (CONNECT) > Feb 22 17:02:26 schneebaum chat[351]: ^M > Feb 22 17:03:00 schneebaum chat[351]: ATDT0019102244^M^M > Feb 22 17:03:00 schneebaum chat[351]: CONNECT > Feb 22 17:03:00 schneebaum chat[351]: -- got it > Feb 22 17:03:00 schneebaum chat[351]: send (\d) > Feb 22 17:03:01 schneebaum pppd[350]: Serial connection established. > Feb 22 17:03:01 schneebaum pppd[350]: Using interface ppp0 > Feb 22 17:03:01 schneebaum pppd[350]: Connect: ppp0 <--> /dev/ttyS0 > Feb 22 17:03:02 schneebaum pppd[350]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic > 0x45fa5d47> <pcomp> <accomp>] > Feb 22 17:03:02 schneebaum pppd[350]: rcvd [LCP ConfReq id=0x1 <mru > 1524> <asyncmap > 0x0> <auth pap> <pcomp> <accomp> <mrru 1524> <endpoint > [local:73.74.61.63.6b.69.6e.67]>] > Feb 22 17:03:02 schneebaum pppd[350]: sent [LCP ConfRej id=0x1 <mrru > 1524>] > > (...) > > Meine Frage ist nat�rlich: An was liegt das? Habe ich beim Konfigurieren > der > Einstellungen f�rs Kernel-Compilieren einen Fehler gemacht? > Angeh�ngt habe ich die .config des neuen Kernels. > > Wolfgang Pausch ---------------------------------------------------------------------------- ---- > # > # Automatically generated make config: don't edit > # > CONFIG_X86=y > CONFIG_ISA=y > # CONFIG_SBUS is not set > CONFIG_UID16=y > > # > # Code maturity level options > # > # CONFIG_EXPERIMENTAL is not set > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODVERSIONS=y > CONFIG_KMOD=y > > # > # Processor type and features > # > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > # CONFIG_M586TSC is not set > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUM4 is not set > CONFIG_MK6=y > # CONFIG_MK7 is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_L1_CACHE_SHIFT=5 > CONFIG_X86_ALIGNMENT_16=y > CONFIG_X86_TSC=y > CONFIG_X86_USE_PPRO_CHECKSUM=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_MICROCODE is not set > # CONFIG_X86_MSR is not set > # CONFIG_X86_CPUID is not set > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > # CONFIG_MATH_EMULATION is not set > # CONFIG_MTRR is not set > CONFIG_SMP=y > # CONFIG_MULTIQUAD is not set > CONFIG_HAVE_DEC_LOCK=y > > # > # General setup > # > CONFIG_NET=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > CONFIG_PCI_NAMES=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > CONFIG_HOTPLUG=y > > # > # PCMCIA/CardBus support > # > # CONFIG_PCMCIA is not set > > # > # PCI Hotplug Support > # > CONFIG_SYSVIPC=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_SYSCTL=y > CONFIG_KCORE_ELF=y > # CONFIG_KCORE_AOUT is not set > CONFIG_BINFMT_AOUT=y > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_MISC=y > CONFIG_PM=y > # CONFIG_APM is not set > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > CONFIG_PARPORT=y > CONFIG_PARPORT_PC=y > CONFIG_PARPORT_PC_CML1=y > CONFIG_PARPORT_SERIAL=y > # CONFIG_PARPORT_AMIGA is not set > # CONFIG_PARPORT_MFC3 is not set > # CONFIG_PARPORT_ATARI is not set > # CONFIG_PARPORT_GSC is not set > # CONFIG_PARPORT_SUNBPP is not set > # CONFIG_PARPORT_OTHER is not set > # CONFIG_PARPORT_1284 is not set > > # > # Plug and Play configuration > # > CONFIG_PNP=m > CONFIG_ISAPNP=m > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_DEV_XD is not set > CONFIG_PARIDE=m > CONFIG_PARIDE_PARPORT=y > > # > # Parallel IDE high-level drivers > # > CONFIG_PARIDE_PD=m > CONFIG_PARIDE_PCD=m > CONFIG_PARIDE_PF=m > # CONFIG_PARIDE_PT is not set > CONFIG_PARIDE_PG=m > > # > # Parallel IDE protocol modules > # > # CONFIG_PARIDE_ATEN is not set > # CONFIG_PARIDE_BPCK is not set > # CONFIG_PARIDE_BPCK6 is not set > # CONFIG_PARIDE_COMM is not set > # CONFIG_PARIDE_DSTR is not set > # CONFIG_PARIDE_FIT2 is not set > # CONFIG_PARIDE_FIT3 is not set > # CONFIG_PARIDE_EPAT is not set > # CONFIG_PARIDE_EPIA is not set > # CONFIG_PARIDE_FRIQ is not set > # CONFIG_PARIDE_FRPW is not set > # CONFIG_PARIDE_KBIC is not set > # CONFIG_PARIDE_KTTI is not set > # CONFIG_PARIDE_ON20 is not set > # CONFIG_PARIDE_ON26 is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_RAM is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > > # > # Networking options > # > CONFIG_PACKET=y > # CONFIG_PACKET_MMAP is not set > CONFIG_NETLINK_DEV=y > # CONFIG_NETFILTER is not set > # CONFIG_FILTER is not set > CONFIG_UNIX=y > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > > # > # > # > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > > # > # ATA/IDE/MFM/RLL support > # > CONFIG_IDE=y > > # > # IDE, ATA and ATAPI Block devices > # > CONFIG_BLK_DEV_IDE=y > > # > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_HD is not set > CONFIG_BLK_DEV_IDEDISK=y > CONFIG_IDEDISK_MULTI_MODE=y > # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set > # CONFIG_BLK_DEV_COMMERIAL is not set > CONFIG_BLK_DEV_IDECD=y > # CONFIG_BLK_DEV_IDETAPE is not set > CONFIG_BLK_DEV_IDEFLOPPY=y > # CONFIG_BLK_DEV_IDESCSI is not set > > # > # IDE chipset support/bugfixes > # > CONFIG_BLK_DEV_CMD640=y > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > CONFIG_BLK_DEV_RZ1000=y > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > CONFIG_BLK_DEV_ADMA=y > # CONFIG_BLK_DEV_OFFBOARD is not set > CONFIG_IDEDMA_PCI_AUTO=y > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_BLK_DEV_HPT366 is not set > CONFIG_BLK_DEV_PIIX=y > CONFIG_PIIX_TUNING=y > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_PDC202XX is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_CHIPSETS is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_IDEDMA_IVB is not set > # CONFIG_DMA_NONPCI is not set > CONFIG_BLK_DEV_IDE_MODES=y > > # > # SCSI support > # > CONFIG_SCSI=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > CONFIG_SD_EXTRA_DEVS=40 > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > CONFIG_SCSI_DEBUG_QUEUES=y > # CONFIG_SCSI_MULTI_LUN is not set > CONFIG_SCSI_CONSTANTS=y > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AHA1740 is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_MEGARAID is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_DMA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > CONFIG_SCSI_PPA=m > CONFIG_SCSI_IMM=m > CONFIG_SCSI_IZIP_EPP16=y > # CONFIG_SCSI_IZIP_SLOW_CTR is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_NCR53C7xx is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_NCR53C8XX is not set > # CONFIG_SCSI_SYM53C8XX is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_SEAGATE is not set > # CONFIG_SCSI_SIM710 is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_BOOT is not set > # CONFIG_FUSION_ISENSE is not set > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > CONFIG_DUMMY=m > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_NET_SB1000 is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNGEM is not set > # CONFIG_NET_VENDOR_3COM is not set > # CONFIG_LANCE is not set > # CONFIG_NET_VENDOR_SMC is not set > # CONFIG_NET_VENDOR_RACAL is not set > # CONFIG_DEPCA is not set > # CONFIG_HP100 is not set > # CONFIG_NET_ISA is not set > CONFIG_NET_PCI=y > # CONFIG_PCNET32 is not set > # CONFIG_APRICOT is not set > # CONFIG_CS89x0 is not set > # CONFIG_TULIP is not set > # CONFIG_DE4X5 is not set > # CONFIG_DGRS is not set > # CONFIG_DM9102 is not set > CONFIG_EEPRO100=y > # CONFIG_FEALNX is not set > # CONFIG_NATSEMI is not set > # CONFIG_NE2K_PCI is not set > # CONFIG_8139TOO is not set > # CONFIG_SIS900 is not set > # CONFIG_EPIC100 is not set > # CONFIG_SUNDANCE is not set > # CONFIG_TLAN is not set > # CONFIG_VIA_RHINE is not set > # CONFIG_WINBOND_840 is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_SK98LIN is not set > # CONFIG_FDDI is not set > # CONFIG_PLIP is not set > CONFIG_PPP=y > CONFIG_PPP_ASYNC=y > CONFIG_PPP_SYNC_TTY=m > CONFIG_PPP_DEFLATE=y > # CONFIG_PPP_BSDCOMP is not set > # CONFIG_PPPOATM is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Old CD-ROM drivers (not SCSI, not IDE) > # > # CONFIG_CD_NO_IDESCSI is not set > > # > # Input core support > # > # CONFIG_INPUT is not set > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > CONFIG_SERIAL=y > # CONFIG_SERIAL_CONSOLE is not set > # CONFIG_SERIAL_EXTENDED is not set > # CONFIG_SERIAL_NONSTANDARD is not set > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > # CONFIG_PRINTER is not set > # CONFIG_PPDEV is not set > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > CONFIG_MOUSE=y > CONFIG_PSMOUSE=y > # CONFIG_82C710_MOUSE is not set > # CONFIG_PC110_PAD is not set > > # > # Joysticks > # > # CONFIG_INPUT_GAMEPORT is not set > > # > # Input core support is needed for gameports > # > > # > # Input core support is needed for joysticks > # > # CONFIG_QIC02_TAPE is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_INTEL_RNG is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > CONFIG_AGP=y > CONFIG_AGP_INTEL=y > CONFIG_AGP_I810=y > CONFIG_AGP_VIA=y > CONFIG_AGP_AMD=y > CONFIG_AGP_SIS=y > CONFIG_AGP_ALI=y > # CONFIG_AGP_SWORKS is not set > CONFIG_DRM=y > CONFIG_DRM_TDFX=y > # CONFIG_DRM_GAMMA is not set > # CONFIG_DRM_R128 is not set > CONFIG_DRM_RADEON=y > # CONFIG_DRM_I810 is not set > # CONFIG_DRM_MGA is not set > # CONFIG_DRM_SIS is not set > # CONFIG_MWAVE is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # File systems > # > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > # CONFIG_AUTOFS4_FS is not set > # CONFIG_EXT3_FS is not set > # CONFIG_JBD is not set > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > # CONFIG_UMSDOS_FS is not set > CONFIG_VFAT_FS=y > # CONFIG_CRAMFS is not set > CONFIG_TMPFS=y > # CONFIG_RAMFS is not set > CONFIG_ISO9660_FS=y > CONFIG_JOLIET=y > CONFIG_ZISOFS=y > # CONFIG_MINIX_FS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_NTFS_FS is not set > # CONFIG_HPFS_FS is not set > CONFIG_PROC_FS=y > # CONFIG_DEVPTS_FS is not set > # CONFIG_ROMFS_FS is not set > CONFIG_EXT2_FS=y > # CONFIG_SYSV_FS is not set > # CONFIG_UDF_FS is not set > # CONFIG_UFS_FS is not set > > # > # Network File Systems > # > # CONFIG_CODA_FS is not set > CONFIG_NFS_FS=m > # CONFIG_NFS_V3 is not set > # CONFIG_NFSD is not set > CONFIG_SUNRPC=m > CONFIG_LOCKD=m > # CONFIG_SMB_FS is not set > # CONFIG_NCP_FS is not set > CONFIG_ZISOFS_FS=y > CONFIG_ZLIB_FS_INFLATE=y > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > # CONFIG_SMB_NLS is not set > CONFIG_NLS=y > > # > # Native Language Support > # > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > CONFIG_NLS_CODEPAGE_852=m > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ISO8859_1 is not set > CONFIG_NLS_ISO8859_2=m > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Console drivers > # > CONFIG_VGA_CONSOLE=y > # CONFIG_VIDEO_SELECT is not set > > # > # Sound > # > CONFIG_SOUND=y > # CONFIG_SOUND_BT878 is not set > # CONFIG_SOUND_CMPCI is not set > # CONFIG_SOUND_EMU10K1 is not set > # CONFIG_SOUND_FUSION is not set > # CONFIG_SOUND_CS4281 is not set > # CONFIG_SOUND_ES1370 is not set > # CONFIG_SOUND_ES1371 is not set > # CONFIG_SOUND_ESSSOLO1 is not set > # CONFIG_SOUND_MAESTRO is not set > # CONFIG_SOUND_ICH is not set > # CONFIG_SOUND_SONICVIBES is not set > # CONFIG_SOUND_TRIDENT is not set > # CONFIG_SOUND_MSNDCLAS is not set > # CONFIG_SOUND_MSNDPIN is not set > # CONFIG_SOUND_VIA82CXXX is not set > # CONFIG_SOUND_OSS is not set > > # > # USB support > # > CONFIG_USB=m > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > # CONFIG_USB_DEVICEFS is not set > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_LONG_TIMEOUT is not set > > # > # USB Controllers > # > # CONFIG_USB_UHCI is not set > CONFIG_USB_UHCI_ALT=m > # CONFIG_USB_OHCI is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_AUDIO is not set > CONFIG_USB_STORAGE=m > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > # > # USB Human Interface Devices (HID) > # > > # > # Input core support is needed for USB HID > # > > # > # USB Imaging devices > # > # CONFIG_USB_DC2XX is not set > # CONFIG_USB_SCANNER is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB Multimedia devices > # > > # > # Video4Linux support is needed for USB Multimedia device support > # > > # > # USB Network adaptors > # > > # > # USB port drivers > # > # CONFIG_USB_USS720 is not set > > # > # USB Serial Converter support > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > > # > # Kernel hacking > # > # CONFIG_DEBUG_KERNEL is not set > > -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
