Carsten Dirk wrote:
[...]
> Probleme faxe versenden woran liegt das? Ich benutze Hylafax 4.1.1 unter woody
> mit einem US Robotics Modem Sporster Flash an ttyS0 angs.
>
>
> An attempt to receive facsimile on ttyS0 failed because:
>
> RSPREC invalid response received
>
> ---- Transcript of session follows ----
[...]
> Apr 27 14:03:55.82: [ 1952]: RECV: 197 total lines, 2 bad lines, 1 consecutive bad
>lines
> Apr 27 14:03:55.82: [ 1952]: --> [16:+FPS:1,198,0,0,0]
> Apr 27 14:04:05.16: [ 1952]: --> [7:+FHS:A1]
> Apr 27 14:04:05.16: [ 1952]: REMOTE HANGUP: RSPREC invalid response received (code
>A1)
> Apr 27 14:04:05.29: [ 1952]: --> [2:OK]
[...]
Da steht's woran es liegt...
und dann ist Google Dein Freund ;)
A0... | RECEIVE PHASE D HANGUP CODES (Class 2.0) |
+----------+-------------------------------------------------+
| A0 | Unspecified Receive Phase D errors |
| A1* | RSPREC invalid response received |
| A2* | COMREC invalid response received |
| A3 | Unable to continue after PIN or PIP |
+----------+-------------------------------------------------+
There are several possible causes for errors marked * in the table:
1) excessively noisy phone line which disrupts communications;
2) (in the case of transmission) far-end fax machine has run out
of paper;
3) protocol incompatibility between the fax modem and the fax
machine (see TN #117).
Punkt 3) ist gar nicht so unwahrscheinlich.
Es gibt bei hylafax.org eine Mailingliste mit Archiv. Dort ist das
Problem auch des�fteren zu finden. Nach einer evt. m�glichen L�sung
kannst Du dort suchen.
--
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
