Hallo Peter, Peter Weiss schrieb: > irgendwie habe ich es geschafft bei der Installation auf meinem > Notebook mir die Partitionstabelle so halb zu schreddern. > Was hast Du installiert? Mit welchem Programm welchen OSs hast Du zuletzt schreibend auf die Partitionstabelle des mbr zugegriffen?
> Das führt dazu dass Kernel > ab 2.6.8. nicht mehr booten sondern mit > VFS: Cannot open root device "305"or unknown-block(3,5) > Please append a correct "root=" boot option > Kernel panic VFS: Unable to mount root fs on unknown-block(3,5) > abbrechen. > root ist /dev/hda4? Kannst Du die anderen OSe starten? Was steckt im mbr? lilo, FreeBSD-Bootmanager, mbr? > Die fdisk-Ausgabe sieht ja noch ganz gut aus: > # fdisk -l > Disk /dev/hda: 60.0 GB, 60011642880 bytes > 255 heads, 63 sectors/track, 7296 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System mbr > /dev/hda1 * 1 1825 14659281 c W95 FAT32 (LBA) > /dev/hda2 1826 4865 24418800 f W95 Ext'd (LBA) > /dev/hda3 4866 7284 19430617+ a5 FreeBSD > /dev/hda4 7285 7296 96390 83 Linux /dev/hda2: immer zwischen 1826 und 4865 > /dev/hda5 1826 3042 9775521 83 Linux > /dev/hda6 3043 3165 987966 82 Linux swap > /dev/hda7 3166 3895 5863693+ 83 Linux > /dev/hda8 3896 4865 7791493+ 83 Linux > > > sfdisk meldet Partitionen, die ich nicht angelegt habe: > Doch hast Du! Bei der Installation von FreeBSD! > # sfdisk -d > Warning: extended partition does not start at a cylinder boundary. > DOS and Linux will interpret the contents differently. > # partition table of /dev/hda > Mit fdisc von FreeBSD partitioniert? > unit: sectors > mbr > /dev/hda1 : start= 63, size= 29318562, Id= c, bootable > /dev/hda2 : start= 29318625, size= 48837600, Id= f > /dev/hda3 : start= 78156225, size= 38861235, Id=a5 > /dev/hda4 : start=117017460, size= 192780, Id=83 /dev/hda2 > /dev/hda5 : start= 29318688, size= 19551042, Id=83 > /dev/hda6 : start= 48869793, size= 1975932, Id=82 > /dev/hda7 : start= 50845788, size= 11727387, Id=83 > /dev/hda8 : start= 62573238, size= 15582987, Id=83 /dev/hda3 FreeBSD Partitionen > /dev/hda9 : start= 78156225, size= 14680064 > /dev/hda10: start= 92836289, size= 2097152 > /dev/hda11: start= 94933441, size= 2097152 > /dev/hda12: start= 97030593, size= 9830400 > /dev/hda13: start=106860993, size= 10156467 > > Wenn ich die Diagnose Optionen etwas weiter aufdrehe meldet sfdisk: > > # sfdisk -V -l -x > > Disk /dev/hda: 116280 cylinders, 16 heads, 63 sectors/track > Warning: extended partition does not start at a cylinder boundary. > DOS and Linux will interpret the contents differently. > Warning: The partition table looks like it was made > for C/H/S=*/255/63 (instead of 116280/16/63). > For this listing I'll assume that geometry. > Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 > > Device Boot Start End #cyls #blocks Id System > /dev/hda1 * 0+ 1824 1825- 14659281 c W95 FAT32 (LBA) > /dev/hda2 1825 4864 3040 24418800 f W95 Ext'd (LBA) > /dev/hda3 4865 7283 2419 19430617+ a5 FreeBSD > start: (c,h,s) expected (1023,254,63) found (1023,255,63) > /dev/hda4 7284 7295 12 96390 83 Linux > start: (c,h,s) expected (1023,254,63) found (1023,255,63) > > /dev/hda5 1825+ 3041 1217- 9775521 83 Linux > - 3042 3164 123 987997+ 5 Extended > - 1825 1824 0 0 0 Empty > - 1825 1824 0 0 0 Empty > > /dev/hda6 3042+ 3164 123- 987966 82 Linux swap > - 3165 3894 730 5863725 5 Extended > - 3042 3041 0 0 0 Empty > - 3042 3041 0 0 0 Empty > > /dev/hda7 3165+ 3894 730- 5863693+ 83 Linux > - 3895 4864 970 7791525 5 Extended > - 3165 3164 0 0 0 Empty > - 3165 3164 0 0 0 Empty > Extended in Extended? Wozu? > /dev/hda8 3895+ 4864 970- 7791493+ 83 Linux > - 3895 3894 0 0 0 Empty > - 3895 3894 0 0 0 Empty > - 3895 3894 0 0 0 Empty > > /dev/hda9 4865 5778- 914- 7340032 > /dev/hda10 5778+ 5909- 131- 1048576 > /dev/hda11 5909+ 6039- 131- 1048576 > /dev/hda12 6039+ 6651- 612- 4915200 > > /dev/hda13 6651+ 7283 633- 5078233+ > Warning: partitions 3 and 9 overlap > sfdisk erkennt /dev/hda3 nicht als Extended > Die Partitionierung habe ich mit einem fdisk von Knoppix gemacht. > Waren die Partitionen nicht schon vorher teilweise angelegt? > Hat wer'ne Idee wie ich das (ohne Verluste) reparieren kann? > Kannst Du mit Knoppix auf /dev/hda[124] zugreifen? Gruß Uli -- Auftragsdatenbank: http://jobjektiv.de/index.html -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)