Nochmal ich, Hab immer noch das Bootproblem, konnte aber mittels Rescue von der Woody-CD die Sargeinstallation beenden. (Hab ich das Rescue-System von Sarge Ãbersehen oder gibs da keins?). Nachfolgend die Ausgabe von lilo -C /etc/lilo.conf -v -v -v
raid_setup returns offset = 00000000 ndisk = 0 BIOS VolumeID Device Reading boot sector from /dev/hda pf_hard_disk_scan: ndevs=1 0300 11FC11FC /dev/hda Resolve invalid VolumeIds Resolve duplicate VolumeIds 0300 11FC11FC /dev/hda device codes (user assigned pf) = 0 device codes (user assigned) = 0 device codes (BIOS assigned) = 0 Filling in '/dev/hda' = 0x80 device codes (canonical) = 1 Device 0x0300 BIOS drive 0x80, 255 heads, 9729 cylinders, 63 sectors. Partition offset: 0 sectors. Using Volume ID 11FC11FC on bios 80 Device 0x0303: BIOS drive 0x80, 255 heads, 9729 cylinders, 63 sectors. Partition offset: 82940256 sectors. Using Volume ID 11FC11FC on bios 80 Using MENU secondary loader Calling map_insert_data Secondary loader: 18 sectors (0x3400 dataend). bios_boot = 0x80 bios_map = 0x80 map==boot = 0 map S/N: 11FC11FC BIOS data check will include auto-suppress check Boot image: /vmlinuz -> boot/vmlinuz-2.6.8-1-386 Device 0x0303: BIOS drive 0x80, 255 heads, 9729 cylinders, 63 sectors. Partition offset: 82940256 sectors. Using Volume ID 11FC11FC on bios 80 Setup length is 10 sectors. Mapped 2135 sectors. Mapping RAM disk /initrd.img -> boot/initrd.img-2.6.8-1-386 Device 0x0303: BIOS drive 0x80, 255 heads, 9729 cylinders, 63 sectors. Partition offset: 82940256 sectors. Using Volume ID 11FC11FC on bios 80 RAM disk: 8584 sectors. Added Linux * <dev=0xe0,hd=229,cyl=164,sct=18> "ro root=303" [schnipschnap] Mapped 6 (4+1+1) sectors. Added Windows <dev=0xe0,hd=229,cyl=164,sct=138> BIOS VolumeID Device 80 11FC11FC 0300 Writing boot sector. /boot/boot.0300 exists - no boot sector backup copy made. Map file size: 71168 bytes. RAID device mask 0x0000 Failsafe check: boot_dev_nr = 0x0300 0xffc0 map==boot = 0 map s/n = 11FC11FC (Was bedeutet das RAID in der vorvorletzten Zeile? Soweit ich weiÃ, hab ich kein RAID und auch nicht konfiguriert) lilo.conf sieht ungefÃhr so aus: lba32 boot=/dev/hda root=/dev/hda3 map=/boot/map vga=normal default=Linux image=/vmlinuz label=Linux read-only initrd=/initrd.img other=/dev/hda1 label=Windows Beim Booten passiert immer noch dasselbe: L *blinkender Cursor* zu HÃlfe ... Mfg, Michael -- Unser Bundesinnenmisiter Otto ÅIch-war-ja-mal-bei-den-GrÃnenÅ Schily forderte den RÃcktritt von Juan Antonio Samaranch. Er hat das sehr diplomatisch formuliert. Aber ich muss sagen: ÅBaldiger RÃcktrittÅ oder ÅAmt auf LebenszeitÅ - im Falle von Samaranch rÃckt das sehr nahe zusammen... -- Harald Schmidt -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)