Hallo Leute,
ich habe das folgende Problem. Nach einer installation von sarge via netinstall cd, sehe ich in der bootlog folgendes:
27 19:13:31 mail kernel: usbcore: registered new driver usbfs
Jan 27 19:13:31 mail kernel: usbcore: registered new driver hub
Jan 27 19:13:31 mail kernel: USB Universal Host Controller Interface driver v2.2
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: irq 137, io base 0000c400
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jan 27 19:13:31 mail kernel: hub 1-0:1.0: USB hub found
Jan 27 19:13:31 mail kernel: hub 1-0:1.0: 2 ports detected
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: irq 137, io base 0000c800
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Jan 27 19:13:31 mail kernel: hub 2-0:1.0: USB hub found
Jan 27 19:13:31 mail kernel: hub 2-0:1.0: 2 ports detected
er l�dt die usb sachen mehrfach und gibt dann die fehlermeldung aus dass die treiber bereits geladen wurden?
was kann ich dagegen tun?
zweite frage, w�re es sinnvoll die netwerkkarten (2) und den 3ware controller in einen eigenen kernel zu kompilieren?
Danke Seb.
PS hier der gesamte bootlog:
''''''''##################### Start
Jan 27 19:13:30 mail kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
Jan 27 19:13:30 mail kernel: Inspecting /boot/System.map-2.6.8-1-386
Jan 27 19:13:30 mail kernel: Loaded 28138 symbols from /boot/System.map-2.6.8-1-386.
Jan 27 19:13:30 mail kernel: Symbols match kernel version 2.6.8.
Jan 27 19:13:30 mail kernel: No module symbols loaded - kernel modules not enabled.
Jan 27 19:13:30 mail kernel: Linux version 2.6.8-1-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Thu Nov 25 04:24:08 UTC 2004
Jan 27 19:13:30 mail kernel: BIOS-provided physical RAM map:
Jan 27 19:13:30 mail kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Jan 27 19:13:30 mail kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 27 19:13:30 mail kernel: BIOS-e820: 0000000000100000 - 0000000060000000 (usable)
Jan 27 19:13:30 mail kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jan 27 19:13:30 mail kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jan 27 19:13:30 mail kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jan 27 19:13:30 mail kernel: Warning only 896MB will be used.
Jan 27 19:13:30 mail kernel: Use a HIGHMEM enabled kernel.
Jan 27 19:13:30 mail kernel: 896MB LOWMEM available.
Jan 27 19:13:30 mail kernel: found SMP MP-table at 000f4fe0
Jan 27 19:13:30 mail kernel: On node 0 totalpages: 229376
Jan 27 19:13:31 mail kernel: DMA zone: 4096 pages, LIFO batch:1
Jan 27 19:13:31 mail kernel: Normal zone: 225280 pages, LIFO batch:16
Jan 27 19:13:31 mail kernel: HighMem zone: 0 pages, LIFO batch:1
Jan 27 19:13:31 mail kernel: DMI 2.3 present.
Jan 27 19:13:31 mail kernel: ACPI: Unable to locate RSDP
Jan 27 19:13:31 mail kernel: Intel MultiProcessor Specification v1.4
Jan 27 19:13:31 mail kernel: Virtual Wire compatibility mode.
Jan 27 19:13:31 mail kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Jan 27 19:13:31 mail kernel: Processor #0 6:8 APIC version 17
Jan 27 19:13:31 mail kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Jan 27 19:13:31 mail kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Jan 27 19:13:31 mail kernel: Processors: 1
Jan 27 19:13:31 mail kernel: Built 1 zonelists
Jan 27 19:13:31 mail kernel: Kernel command line: root=/dev/sda1 ro
Jan 27 19:13:31 mail kernel: Initializing CPU#0
Jan 27 19:13:31 mail kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Jan 27 19:13:31 mail kernel: Detected 1000.473 MHz processor.
Jan 27 19:13:31 mail kernel: Using tsc for high-res timesource
Jan 27 19:13:31 mail kernel: Console: colour VGA+ 80x25
Jan 27 19:13:31 mail kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 27 19:13:31 mail kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 27 19:13:31 mail kernel: Memory: 901896k/917504k available (1332k kernel code, 14868k reserved, 729k data, 204k init, 0k highmem)
Jan 27 19:13:31 mail kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jan 27 19:13:31 mail kernel: Calibrating delay loop... 1970.17 BogoMIPS
Jan 27 19:13:31 mail kernel: Security Scaffold v1.0.0 initialized
Jan 27 19:13:31 mail kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 27 19:13:31 mail kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
Jan 27 19:13:31 mail kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
Jan 27 19:13:31 mail kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 27 19:13:31 mail kernel: CPU: L2 cache: 256K
Jan 27 19:13:31 mail kernel: CPU serial number disabled.
Jan 27 19:13:31 mail kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Jan 27 19:13:31 mail kernel: CPU: Intel Pentium III (Coppermine) stepping 0a
Jan 27 19:13:31 mail kernel: Enabling fast FPU save and restore... done.
Jan 27 19:13:31 mail kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 27 19:13:31 mail kernel: Checking 'hlt' instruction... OK.
Jan 27 19:13:31 mail kernel: Checking for popad bug... OK.
Jan 27 19:13:31 mail kernel: enabled ExtINT on CPU#0
Jan 27 19:13:31 mail kernel: ESR value before enabling vector: 00000004
Jan 27 19:13:31 mail kernel: ESR value after enabling vector: 00000000
Jan 27 19:13:31 mail kernel: ENABLING IO-APIC IRQs
Jan 27 19:13:31 mail kernel: Setting 2 in the phys_id_present_map
Jan 27 19:13:31 mail kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Jan 27 19:13:31 mail kernel: init IO_APIC IRQs
Jan 27 19:13:31 mail kernel: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
Jan 27 19:13:31 mail kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Jan 27 19:13:31 mail kernel: number of MP IRQ sources: 20.
Jan 27 19:13:31 mail kernel: number of IO-APIC #2 registers: 24.
Jan 27 19:13:31 mail kernel: testing the IO APIC.......................
Jan 27 19:13:31 mail kernel: IO APIC #2......
Jan 27 19:13:31 mail kernel: .... register #00: 02000000
Jan 27 19:13:31 mail kernel: ....... : physical APIC id: 02
Jan 27 19:13:31 mail kernel: ....... : Delivery Type: 0
Jan 27 19:13:31 mail kernel: ....... : LTS : 0
Jan 27 19:13:31 mail kernel: .... register #01: 00178011
Jan 27 19:13:31 mail kernel: ....... : max redirection entries: 0017
Jan 27 19:13:31 mail kernel: ....... : PRQ implemented: 1
Jan 27 19:13:31 mail kernel: ....... : IO APIC version: 0011
Jan 27 19:13:31 mail kernel: .... register #02: 00000000
Jan 27 19:13:31 mail kernel: ....... : arbitration: 00
Jan 27 19:13:31 mail kernel: .... IRQ redirection table:
Jan 27 19:13:31 mail kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jan 27 19:13:31 mail kernel: 00 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 01 001 01 0 0 0 0 0 1 1 39
Jan 27 19:13:31 mail kernel: 02 001 01 0 0 0 0 0 1 1 31
Jan 27 19:13:31 mail kernel: 03 001 01 0 0 0 0 0 1 1 41
Jan 27 19:13:31 mail kernel: 04 001 01 0 0 0 0 0 1 1 49
Jan 27 19:13:31 mail kernel: 05 001 01 1 1 0 1 0 1 1 51
Jan 27 19:13:31 mail kernel: 06 001 01 0 0 0 0 0 1 1 59
Jan 27 19:13:31 mail kernel: 07 001 01 0 0 0 0 0 1 1 61
Jan 27 19:13:31 mail kernel: 08 001 01 0 0 0 0 0 1 1 69
Jan 27 19:13:31 mail kernel: 09 001 01 0 0 0 0 0 1 1 71
Jan 27 19:13:31 mail kernel: 0a 001 01 1 1 0 1 0 1 1 79
Jan 27 19:13:31 mail kernel: 0b 001 01 1 1 0 1 0 1 1 81
Jan 27 19:13:31 mail kernel: 0c 001 01 1 1 0 1 0 1 1 89
Jan 27 19:13:31 mail kernel: 0d 001 01 0 0 0 0 0 1 1 91
Jan 27 19:13:31 mail kernel: 0e 001 01 0 0 0 0 0 1 1 99
Jan 27 19:13:31 mail kernel: 0f 001 01 0 0 0 0 0 1 1 A1
Jan 27 19:13:31 mail kernel: 10 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 11 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 12 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 13 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 14 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 15 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 16 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: 17 000 00 1 0 0 0 0 0 0 00
Jan 27 19:13:31 mail kernel: Using vector-based indexing
Jan 27 19:13:31 mail kernel: IRQ to pin mappings:
Jan 27 19:13:31 mail kernel: IRQ0 -> 0:2
Jan 27 19:13:31 mail kernel: IRQ1 -> 0:1
Jan 27 19:13:31 mail kernel: IRQ3 -> 0:3
Jan 27 19:13:31 mail kernel: IRQ4 -> 0:4
Jan 27 19:13:31 mail kernel: IRQ6 -> 0:6
Jan 27 19:13:31 mail kernel: IRQ7 -> 0:7
Jan 27 19:13:31 mail kernel: IRQ8 -> 0:8
Jan 27 19:13:31 mail kernel: IRQ9 -> 0:9
Jan 27 19:13:31 mail kernel: IRQ13 -> 0:13
Jan 27 19:13:31 mail kernel: IRQ14 -> 0:14
Jan 27 19:13:31 mail kernel: IRQ15 -> 0:15
Jan 27 19:13:31 mail kernel: IRQ81 -> 0:5
Jan 27 19:13:31 mail kernel: IRQ121 -> 0:10
Jan 27 19:13:31 mail kernel: IRQ129 -> 0:11
Jan 27 19:13:31 mail kernel: IRQ137 -> 0:12
Jan 27 19:13:31 mail kernel: .................................... done.
Jan 27 19:13:31 mail kernel: Using local APIC timer interrupts.
Jan 27 19:13:31 mail kernel: calibrating APIC timer ...
Jan 27 19:13:31 mail kernel: ..... CPU clock speed is 999.0859 MHz.
Jan 27 19:13:31 mail kernel: ..... host bus clock speed is 133.0314 MHz.
Jan 27 19:13:31 mail kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Jan 27 19:13:31 mail kernel: Freeing initrd memory: 4292k freed
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 16
Jan 27 19:13:31 mail kernel: EISA bus registered
Jan 27 19:13:31 mail kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
Jan 27 19:13:31 mail kernel: PCI: Using configuration type 1
Jan 27 19:13:31 mail kernel: mtrr: v2.0 (20020519)
Jan 27 19:13:31 mail kernel: ACPI: Subsystem revision 20040326
Jan 27 19:13:31 mail kernel: ACPI: Interpreter disabled.
Jan 27 19:13:31 mail kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 27 19:13:31 mail kernel: PnPBIOS: Scanning system for PnP BIOS support...
Jan 27 19:13:31 mail kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd10
Jan 27 19:13:31 mail kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd40, dseg 0xf0000
Jan 27 19:13:31 mail kernel: PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
Jan 27 19:13:31 mail kernel: PCI: Probing PCI hardware
Jan 27 19:13:31 mail kernel: PCI: Probing PCI hardware (bus 00)
Jan 27 19:13:31 mail kernel: PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 137
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 137
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 121
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 81
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I11,P0) -> 129
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I13,P0) -> 121
Jan 27 19:13:31 mail kernel: PCI->APIC IRQ transform: (B0,I16,P0) -> 137
Jan 27 19:13:31 mail kernel: VFS: Disk quotas dquot_6.5.1
Jan 27 19:13:31 mail kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jan 27 19:13:31 mail kernel: devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
Jan 27 19:13:31 mail kernel: devfs: boot_options: 0x0
Jan 27 19:13:31 mail kernel: Initializing Cryptographic API
Jan 27 19:13:31 mail kernel: PCI: Enabling Via external APIC routing
Jan 27 19:13:31 mail kernel: PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 9
Jan 27 19:13:31 mail kernel: PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 9
Jan 27 19:13:31 mail kernel: isapnp: Scanning for PnP cards...
Jan 27 19:13:31 mail kernel: isapnp: No Plug & Play device found
Jan 27 19:13:31 mail kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
Jan 27 19:13:31 mail kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 27 19:13:31 mail kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 27 19:13:31 mail kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jan 27 19:13:31 mail kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 27 19:13:31 mail kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 27 19:13:31 mail kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 27 19:13:31 mail kernel: EISA: Probing bus 0 at eisa0
Jan 27 19:13:31 mail kernel: Cannot allocate resource for EISA slot 5
Jan 27 19:13:31 mail kernel: EISA: Detected 0 cards.
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 2
Jan 27 19:13:31 mail kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Jan 27 19:13:31 mail kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 8
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 20
Jan 27 19:13:31 mail kernel: RAMDISK: cramfs filesystem found at block 0
Jan 27 19:13:31 mail kernel: RAMDISK: Loading 4292 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
Jan 27 19:13:31 mail kernel: VFS: Mounted root (cramfs filesystem) readonly.
Jan 27 19:13:31 mail kernel: Freeing unused kernel memory: 204k freed
Jan 27 19:13:31 mail kernel: vesafb: probe of vesafb0 failed with error -6
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 1
Jan 27 19:13:31 mail kernel: SCSI subsystem initialized
Jan 27 19:13:31 mail kernel: 3ware Storage Controller device driver for Linux v1.26.00.039.
Jan 27 19:13:31 mail kernel: scsi0 : Found a 3ware Storage Controller at 0xe800, IRQ: 121, P-chip: 1.3
Jan 27 19:13:31 mail kernel: scsi0 : 3ware Storage Controller
Jan 27 19:13:31 mail kernel: Using anticipatory io scheduler
Jan 27 19:13:31 mail kernel: Vendor: 3ware Model: Logical Disk 0 Rev: 1.2
Jan 27 19:13:31 mail kernel: Type: Direct-Access ANSI SCSI revision: 00
Jan 27 19:13:31 mail kernel: SCSI device sda: 312579760 512-byte hdwr sectors (160041 MB)
Jan 27 19:13:31 mail kernel: SCSI device sda: drive cache: write back
Jan 27 19:13:31 mail kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
Jan 27 19:13:31 mail kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 27 19:13:31 mail kernel: kjournald starting. Commit interval 5 seconds
Jan 27 19:13:31 mail kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 19:13:31 mail kernel: Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1
Jan 27 19:13:31 mail kernel: EXT3 FS on sda1, internal journal
Jan 27 19:13:31 mail kernel: Real Time Clock Driver v1.12
Jan 27 19:13:31 mail kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 27 19:13:31 mail kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 27 19:13:31 mail kernel: hda: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
Jan 27 19:13:31 mail kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 27 19:13:31 mail kernel: hda: ATAPI 24X CD-ROM drive, 128kB Cache
Jan 27 19:13:31 mail kernel: Uniform CD-ROM driver Revision: 3.20
Jan 27 19:13:31 mail kernel: Capability LSM initialized
Jan 27 19:13:31 mail kernel: kjournald starting. Commit interval 5 seconds
Jan 27 19:13:31 mail kernel: EXT3 FS on sda6, internal journal
Jan 27 19:13:31 mail kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 27 19:13:31 mail kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jan 27 19:13:31 mail kernel: parport_pc: VIA 686A/8231 detected
Jan 27 19:13:31 mail kernel: parport_pc: probing current configuration
Jan 27 19:13:31 mail kernel: parport_pc: Current parallel port base: 0x378
Jan 27 19:13:31 mail kernel: parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Jan 27 19:13:31 mail kernel: parport_pc: VIA parallel port: io=0x378, irq=7
Jan 27 19:13:31 mail kernel: e100: Intel(R) PRO/100 Network Driver, 3.0.18
Jan 27 19:13:31 mail kernel: e100: Copyright(c) 1999-2004 Intel Corporation
Jan 27 19:13:31 mail kernel: e100: eth0: e100_probe: addr 0xd6a01000, irq 81, MAC addr 00:50:45:00:70:AC
Jan 27 19:13:31 mail kernel: e100: eth1: e100_probe: addr 0xd6a02000, irq 137, MAC addr 00:50:45:00:70:AB
Jan 27 19:13:31 mail kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
Jan 27 19:13:31 mail kernel: VP_IDE: chipset revision 6
Jan 27 19:13:31 mail kernel: VP_IDE: not 100%% native mode: will probe irqs later
Jan 27 19:13:31 mail kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
Jan 27 19:13:31 mail kernel: VP_IDE: port 0x01f0 already claimed by ide0
Jan 27 19:13:31 mail kernel: ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
Jan 27 19:13:31 mail kernel: CMD649: IDE controller at PCI slot 0000:00:0b.0
Jan 27 19:13:31 mail kernel: CMD649: chipset revision 2
Jan 27 19:13:31 mail kernel: CMD649: 100%% native mode on irq 129
Jan 27 19:13:31 mail kernel: ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio
Jan 27 19:13:31 mail kernel: ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio
Jan 27 19:13:31 mail kernel: usbcore: registered new driver usbfs
Jan 27 19:13:31 mail kernel: usbcore: registered new driver hub
Jan 27 19:13:31 mail kernel: USB Universal Host Controller Interface driver v2.2
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: irq 137, io base 0000c400
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Jan 27 19:13:31 mail kernel: hub 1-0:1.0: USB hub found
Jan 27 19:13:31 mail kernel: hub 1-0:1.0: 2 ports detected
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: irq 137, io base 0000c800
Jan 27 19:13:31 mail kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Jan 27 19:13:31 mail kernel: hub 2-0:1.0: USB hub found
Jan 27 19:13:31 mail kernel: hub 2-0:1.0: 2 ports detected
Jan 27 19:13:31 mail kernel: input: PC Speaker
Jan 27 19:13:31 mail kernel: inserting floppy driver for 2.6.8-1-386
Jan 27 19:13:31 mail kernel: Floppy drive(s): fd0 is 1.44M
Jan 27 19:13:31 mail kernel: FDC 0 is a post-1991 82077
Jan 27 19:13:31 mail kernel: agpgart: Detected VIA Apollo Pro 133 chipset
Jan 27 19:13:31 mail kernel: agpgart: Maximum main memory to use for agp memory: 816M
Jan 27 19:13:31 mail kernel: agpgart: AGP aperture is 64M @ 0xd0000000
Jan 27 19:13:31 mail kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Jan 27 19:13:31 mail kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 27 19:13:31 mail kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
Jan 27 19:13:31 mail kernel: pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
Jan 27 19:13:31 mail kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Jan 27 19:13:31 mail kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others
Jan 27 19:13:31 mail kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Jan 27 19:13:31 mail kernel: NET: Registered protocol family 10
Jan 27 19:13:31 mail kernel: Disabled Privacy Extensions on device c02ca840(lo)
Jan 27 19:13:31 mail kernel: IPv6 over IPv4 tunneling driver
Jan 27 19:13:41 mail kernel: eth0: no IPv6 routers present
--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
