On Tuesday 08 February 2005 19:43, Andre Raabe wrote: > On Tue, Feb 08, 2005 at 05:31:34PM +0100, RAF wrote: > > irgendwelche ideen woran es liegen könnte? > > Meine Vermutung geht jetzt einfach mal dahin, dass Du eventuell auch ein > Besitzer einer Version 3 Karte bist. Auf der Rueckseite der PCMCIA-Karte > steht rechts unten (beim CE Logo) eine Versionsangabe. Sollte es sich > tatsaechlich um eine V3.0 [1] handeln, wirst Du wohl die Karte nicht zum > laufen bringen koennen. > Prism54 hat leider noch keine Unterstuetzung dafuer. > > [1] http://prism54.org/pipermail/prism54-devel/2004-November/002164.html > > > Gruss, hallo :)
ist eine taiwan (2.0) also daran wird es wohl nicht liegen hier nochmal der output von wpa_supplicant mit -dd: Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'prism54' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Line: 1 - start of a new network block ssid - hexdump_ascii(len=4): ## ## ## ## #### PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='####' Initializing interface (2) 'eth0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 Own MAC address: ##:##:##:##:##:## wpa_driver_prism54_set_countermeasures - not yet implemented Setting scan request: 0 sec 100000 usec Starting AP scan (broadcast SSID) EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 Scan timeout - try to get results Received 143 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 0: 00:09:5b:eb:18:9c ssid='####' wpa_ie_len=24 rsn_ie_len=0 selected Trying to associate with ##:##:##:##:##:## (SSID='####' freq=2442 MHz) Cancelling scan request Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing Setting authentication timeout: 5 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto Wireless event: cmd=0x8b04 len=12 Wireless event: cmd=0x8b1a len=17 Wireless event: cmd=0x8c02 len=67 Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C (00)' Wireless event: cmd=0x8c02 len=67 Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C (00)' Wireless event: cmd=0x8c02 len=67 Custom wireless event: 'Received a probe from client to 00:09:5B:EB:18:9C (00)' EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0 Authentication with 00:00:00:00:00:00 timed out. No keys have been configured - skip key clearing gruß RAF