Hallo,
ich versuche nach einigen Tagen Pause und Recherche, erneut Kernel 2.6.10 mit den alten ISDN4Linux-Treibern zum Laufen zu bringen, weil es mit dem neuen mISDN nur Abst�rze gab.
Auszug aus der Kernel-Konfiguration:
# ISDN subsystem CONFIG_ISDN=m # Old ISDN4Linux CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_ISDN_PPP_BSDCOMP=m CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y # ISDN feature submodules # CONFIG_ISDN_DRV_LOOP is not set # ISDN4Linux hardware drivers CONFIG_ISDN_DRV_HISAX=m CONFIG_HISAX_EURO=y CONFIG_HISAX_NO_SENDCOMPLETE=y CONFIG_HISAX_NO_LLC=y CONFIG_HISAX_NO_KEYPAD=y # CONFIG_HISAX_1TR6 is not set # CONFIG_HISAX_NI1 is not set CONFIG_HISAX_MAX_CARDS=8 # CONFIG_HISAX_16_0 is not set # CONFIG_HISAX_16_3 is not set # CONFIG_HISAX_TELESPCI is not set # CONFIG_HISAX_S0BOX is not set # CONFIG_HISAX_AVM_A1 is not set # CONFIG_HISAX_FRITZPCI is not set # CONFIG_HISAX_AVM_A1_PCMCIA is not set # CONFIG_HISAX_ELSA is not set # CONFIG_HISAX_IX1MICROR2 is not set # CONFIG_HISAX_DIEHLDIVA is not set # CONFIG_HISAX_ASUSCOM is not set # CONFIG_HISAX_TELEINT is not set # CONFIG_HISAX_HFCS is not set CONFIG_HISAX_SEDLBAUER=y # CONFIG_HISAX_SPORTSTER is not set # CONFIG_HISAX_MIC is not set # CONFIG_HISAX_NETJET is not set # CONFIG_HISAX_NETJET_U is not set # CONFIG_HISAX_NICCY is not set # CONFIG_HISAX_ISURF is not set # CONFIG_HISAX_HSTSAPHIR is not set # CONFIG_HISAX_BKM_A4T is not set # CONFIG_HISAX_SCT_QUADRO is not set # CONFIG_HISAX_GAZEL is not set # CONFIG_HISAX_HFC_PCI is not set # CONFIG_HISAX_W6692 is not set # CONFIG_HISAX_HFC_SX is not set # CONFIG_HISAX_ENTERNOW_PCI is not set # CONFIG_HISAX_DEBUG is not set # CONFIG_HISAX_ST5481 is not set # CONFIG_HISAX_HFCUSB is not set # CONFIG_HISAX_FRITZ_PCIPNP is not set # CONFIG_ISDN_DRV_ICN is not set # CONFIG_ISDN_DRV_PCBIT is not set # CONFIG_ISDN_DRV_SC is not set # CONFIG_ISDN_DRV_ACT2000 is not set # CONFIG_ISDN_DRV_TPAM is not set # CAPI subsystem # CONFIG_ISDN_CAPI is not set
Auszug aus dem Syslog:
Mar 2 10:25:06 server kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.5/1.1.2.2/1.1.2.2 loaded
Mar 2 10:25:06 server kernel: HiSax: Linux Driver for passive ISDN cards
Mar 2 10:25:06 server kernel: HiSax: Version 3.5 (module)
Mar 2 10:25:06 server kernel: HiSax: Layer1 Revision 2.46.2.5
Mar 2 10:25:06 server kernel: HiSax: Layer2 Revision 2.30.2.4
Mar 2 10:25:06 server kernel: HiSax: TeiMgr Revision 2.20.2.3
Mar 2 10:25:06 server kernel: HiSax: Layer3 Revision 2.22.2.3
Mar 2 10:25:06 server kernel: HiSax: LinkLayer Revision 2.59.2.5
Mar 2 10:25:06 server kernel: HiSax: Total 1 card defined
Mar 2 10:25:06 server kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Mar 2 10:25:06 server kernel: HiSax: Sedlbauer driver Rev. 1.34.2.6
Mar 2 10:25:06 server kernel: Sedlbauer: PCI subvendor:54 subid 1
Mar 2 10:25:06 server kernel: Sedlbauer: PCI base adr 0xd000
Mar 2 10:25:06 server kernel: Sedlbauer: defined at 0xd000-0xd100 IRQ 9
Mar 2 10:25:06 server kernel: Sedlbauer: speed fax+ pci detected
Mar 2 10:25:06 server kernel: Sedlbauer: ISAC version (0): 2086/2186 V1.1
Mar 2 10:25:06 server kernel: Sedlbauer: resetting card
Mar 2 10:25:06 server kernel: Sedlbauer: ISAR version 1
Mar 2 10:25:06 server kernel: Sedlbauer Speed Fax +: IRQ 9 count 26
Mar 2 10:25:06 server kernel: Sedlbauer: resetting card
Mar 2 10:25:06 server kernel: Sedlbauer Speed Fax +: IRQ 9 count 30
Mar 2 10:25:06 server kernel: HiSax: DSS1 Rev. 2.32.2.3
Mar 2 10:25:06 server kernel: HiSax: 2 channels added
Mar 2 10:25:06 server kernel: HiSax: MAX_WAITING_CALLS added
Das sieht soweit ganz nett aus, aber die ISDN-Devices bleiben tot, d.h. /dev/isdnctrl und Konsorten habe ich zwar manuell angelegt, weil udev das nicht kann, sie funktionieren aber nicht.
imon st�rtzt mit segmentation fault ab (tut er immer, wenn ISDN nicht "da" ist),
Die isdnutils sind etwas freundlicher...
[EMAIL PROTECTED]:~# /etc/init.d/isdnutils start
Starting ISDN services:
no ISDN cards configured! Please configure 'hisax' module with modconf
Read /usr/share/doc/isdnutils-base/README.HiSax.gz for more information
(e.g. with 'zless /usr/share/doc/isdnutils-base/README.HiSax.gz').Danke f�r Tipps,
Michael
-- Michael Hierweck EDV-Serviceteam Werthmann & Hierweck GbR http://www.edv-serviceteam.net
--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
