Hi Daniel, > Bitte lies doch mal die Links, die ich dir gegeben habe, weil langsam > werde ich �rgerlich - derartige Fehler musst du schon selbst ausmerzen: > http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html > |CONFIG_FB_RADEON=y definitely causes problems, so disable it > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
so, jetzt habe ich mich der Seite auch noch gewidmet und sehr gr�ndlich gelesen. Die Konfiguration sollte soweit stimmen. Aber ich bin auf folgendes gestossen: ----- [EMAIL PROTECTED]:~$ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.3 Mesa 4.0.4 ----- Gem�� Flavios Seite besteht also ein Problem. Anbei der Output der /var/log/XFree86.0.log | grep fglrx. Vielleicht kannst du mir noch weiter helfen! Gr�ssle, Tobias ----- (II) LoadModule: "fglrx" (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." (II) fglrx(0): pEnt->device->identifier=0x6f9760 (II) fglrx(0): === [R200PreInit] === begin, [s] (II) fglrx(0): PCI bus 1 card 0 func 0 (**) fglrx(0): Depth 24, (--) framebuffer bpp 32 (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) (==) fglrx(0): Default visual is TrueColor (**) fglrx(0): Option "OpenGLOverlay" "on" (**) fglrx(0): Option "VideoOverlay" "on" (**) fglrx(0): Option "UseInternalAGPGART" "no" (==) fglrx(0): Qbs disabled (==) fglrx(0): RGB weight 888 (II) fglrx(0): Using 8 bits per RGB (8 bit DAC) (==) fglrx(0): Gamma Correction for I is 0x06419064 (==) fglrx(0): Gamma Correction for II is 0x06419064 (==) fglrx(0): Buffer Tiling is ON (II) fglrx(0): initializing int10 (WW) fglrx(0): Bad V_BIOS checksum (II) fglrx(0): Primary V_BIOS segment is: 0xc000 (--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11 4E50)" (Chipset = 0x4e50) (--) fglrx(0): (PciSubVendor = 0x1734, PciSubDevice = 0x105f) (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI (--) fglrx(0): Linear framebuffer (phys) at 0xf0000000 (--) fglrx(0): MMIO registers at 0xfeaf0000 (--) fglrx(0): ROM-BIOS at 0xfeac0000 (--) fglrx(0): ChipExtRevID = 0x00 (--) fglrx(0): ChipIntRevID = 0x0C (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM) (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) fglrx(0): I2C bus "DDC" initialized. (II) fglrx(0): Connector Layout from BIOS -------- (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2 (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) fglrx(0): I2C device "DDC:ddc2" removed. (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0 (II) fglrx(0): Primary head: (II) fglrx(0): Secondary head: (II) fglrx(0): (II) fglrx(0): DesktopSetup 0x0000 (II) fglrx(0): Panel ID string: Samsung LTN154X1 WXGA (II) fglrx(0): Panel Size from BIOS: 1280x800 (==) fglrx(0): PseudoColor visuals disabled (==) fglrx(0): Overlay disabled (**) fglrx(0): OpenGL Overlay enabled (II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000 (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Valid mode using on-chip RMX: 1280x800 (II) fglrx(0): Valid mode using on-chip RMX: 1024x768 (II) fglrx(0): Valid mode using on-chip RMX: 800x600 (II) fglrx(0): Valid mode using on-chip RMX: 640x480 (II) fglrx(0): Total 4 valid mode(s) found. (--) fglrx(0): Virtual size is 1280x800 (pitch 1280) (**) fglrx(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "1280x800" 68.90 1280 1288 1328 1408 800 800 803 816 (**) fglrx(0): *Mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "1024x768" 68.90 1024 1288 1328 1408 768 800 803 816 (**) fglrx(0): *Mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "800x600" 68.90 800 1288 1328 1408 600 800 803 816 (**) fglrx(0): *Mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (II) fglrx(0): Modeline "640x480" 68.90 640 1288 1328 1408 480 800 803 816 (==) fglrx(0): DPI set to (75, 75) (==) fglrx(0): NoAccel = NO (==) fglrx(0): HPV inactive (==) fglrx(0): FSAA enabled: NO (==) fglrx(0): FSAA Gamma enabled (==) fglrx(0): FSAA Multisample Position is fix (==) fglrx(0): NoDRI = NO (II) Loading sub module "fglrxdrm" (II) LoadModule: "fglrxdrm" (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." (II) fglrx(0): Depth moves disabled by default (==) fglrx(0): Capabilities: 0x00000000 (==) fglrx(0): cpuFlags: 0x4000001f (==) fglrx(0): cpuSpeedMHz: 0x0000031e (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so" (**) fglrx(0): using built in AGPGART module: no (==) fglrx(0): UseFastTLS=0 (==) fglrx(0): BlockSignalsOnLock=1 (==) fglrx(0): EnablePrivateBackZ = NO (II) fglrx(0): UMM area: 0xf05e9000 (size=0x07a17000) (II) fglrx(0): driver needs XFree86 version: 4.3.x (II) fglrx(0): detected XFree86 version: 4.3.0 (II) fglrx(0): doing DRIScreenInit (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0" (II) fglrx(0): [drm] added 8192 byte SAREA at 0xffffff0000079000 (II) fglrx(0): [drm] mapped SAREA 0xffffff0000079000 to 0x2a955fd000 (II) fglrx(0): [drm] framebuffer handle = 0xf0000000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.10.19 (II) fglrx(0): Date: Feb 9 2005 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.10 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: no (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0xfeaf0000 (II) fglrx(0): [agp] Mode=0x1f004e0b bridge: 0x1039/0x0755 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000000 (II) fglrx(0): [agp] enabling AGP with mode=0x1f004f0a (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f004302) (II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode) (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672 (II) fglrx(0): [drm] texture shared area handle = 0xffffff0008381000 (II) fglrx(0): shared FSAAScale=1 (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): front overlay: 0xf09d1000 (II) fglrx(0): back overlay: 0xf0acb000 (II) fglrx(0): video overlay: 0xf0bc5000 (II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x005e9000 (II) fglrx(0): Splitting WC range: base: 0xf0000000, size: 0x5e9000 (II) fglrx(0): Splitting WC range: base: 0xf0400000, size: 0x1e9000 (II) fglrx(0): Splitting WC range: base: 0xf0500000, size: 0xe9000 (II) fglrx(0): Splitting WC range: base: 0xf0580000, size: 0x69000 (II) fglrx(0): Splitting WC range: base: 0xf05c0000, size: 0x29000 (II) fglrx(0): Splitting WC range: base: 0xf05e0000, size: 0x9000 (==) fglrx(0): Write-combining range (0xf05e8000,0x1000) (==) fglrx(0): Write-combining range (0xf05e0000,0x9000) (==) fglrx(0): Write-combining range (0xf05c0000,0x29000) (==) fglrx(0): Write-combining range (0xf0580000,0x69000) (==) fglrx(0): Write-combining range (0xf0500000,0xe9000) (==) fglrx(0): Write-combining range (0xf0400000,0x1e9000) (==) fglrx(0): Write-combining range (0xf0000000,0x5e9000) (II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption) (==) fglrx(0): Backing store disabled (==) fglrx(0): Silken mouse enabled (II) fglrx(0): Using hardware cursor (scanline 800) (II) fglrx(0): Largest offscreen area available: 1280 x 402 (**) fglrx(0): DPMS enabled (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA) (II) fglrx(0): Acceleration enabled (II) fglrx(0): X context handle = 0x00000001 (II) fglrx(0): [DRI] installation complete (II) fglrx(0): Direct rendering enabled -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
