> Du solltest auch den Eintrag der anderen Karte posten und evtl. die > Monitor-Angaben...
------------ Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" VendorName "PTS" ModelName "PTS03e4" HorizSync 30 - 98 # DDC-probed VertRefresh 50 - 160 # DDC-probed # These are the DDC-probed settings reported by your monitor. ... ------------------- Section "Monitor" Identifier "Monitor1" Option "DPMS" "true" VendorName "NOK" ModelName "NOK01b3" HorizSync 30 - 86 # DDC-probed VertRefresh 50 - 150 # DDC-probed .... -------------------- Section "Device" ### Available Driver options are:- # sw_cursor is needed for some ati and radeon cards Option "sw_cursor" #Option "hw_cursor" #Option "NoAccel" #Option "ShowCache" #Option "ShadowFB" #Option "UseFBDev" #Option "Rotate" Identifier "Card0" # The following line is auto-generated by KNOPPIX mkxf86config Driver "ati" VendorName "All" BoardName "All" BusID "PCI:1:0:0" EndSection > BusID kannste weglassen, wenn du 2 Karten benutzt IMHO. Ich dachte das geht nur, wenn ich eine Karte habe. Ich kann es ja mal probieren. > Aber was fehlt ist die Angabe welches Device welcher Screen wird, dazu > einfach Screen 0 bzw. Screen 1 in die jeweilige Device-Sektion > aufnehmen. Dieser Eintrag ist auch für Screen1 vorhanden. Allerdings jeweils mit Card1 und Monitor1, --------------------------- Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultColorDepth 16 SubSection "Display" Depth 1 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection > Sieht so aus, als ob der die Mach64 nicht ansprechen kann. Schonmal > mit 2:0:9 als Bussid probiert? (Ich kenne mich da mit dem format nicht > aus, aber probieren geht über studieren)... Ja, habe schon einiges durchprobiert (auch 2:09:0). Jetzt nach deiner Mail nochmal probiert. Das hier habe ich auch aus der Knoppix Config übernommen: ------------------------- Section "Module" Load "ddc" # ddc probing of monitor Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts Load "speedo" Load "type1" Load "freetype" Load "record" EndSection Lars