On Tue, Jun 28, 2005 at 10:14:02AM +0200, Thomas Giese wrote:
> Christoph Marcel Hilberg schrieb:
> 
> >habe hier neuerdings eine Fehlermeldung beim Brennen. Der Brenner hängt
> >am SCSI-Bus. 
> >Ich habe die Fehlermeldung mal angehängt. Würdet Ihr das so
> >interpretieren, dass der Brenner den Abgang macht oder ist es ein
> >Softwareproblem; durch irgentwelche Updates hervorgerufen? 
> 
> Wo ist denn Deine Fehlermeldung??
> 
Interessanter Einwand .... dann hiermit der zweite Anlauf
> 

-- 
best regards Schoene Gruesse Christoph Marcel Hilberg
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORD dev= "0,1,0" gracetime=2 
fs=4096k  -v -useinfo speed=8 -dao -eject -pad -data "/tmp/BOSSv112.iso" ...

cdrecord: Warning: Running on Linux-2.6.8
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.5.31
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.

TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW8824S        '
Revision       : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 3172848 = 3098 KB
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: data   645 MB         padsize:   30 KB
Total size:      741 MB (73:28.73) = 330655 sectors
Lout start:      742 MB (73:30/55) = 330655 sectors
Current Secsize: 512
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in:  -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 29190
Starting to write CD/DVD at speed 8 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
cdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 71 7C ED BB 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk 1904012731 (not valid) 
cmd finished after 28.725s timeout 200s
cdrecord: OPC failed.
Writing  time:   33.535s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
  • Re: SCSI Fehler Christoph Marcel Hilberg

Antwort per Email an