Hallo, Wenn ich mein Debian/Sarge mit Kernel 2.4.24 starte geht die PS/2-Maus. Wenn ich das gleiche System mit Kernel 2.6.12 starte bewegt sie sich kein Stück. In /var/log/XFree86.0.log meckert XFree das es das Device /dev/psaux nicht öffnen könnte. Ich habe auch /dev/input/mice versucht. Geht aber aus demselben Grund nicht.
Ich habe den Kernel 2.6 selbst gebaut: grep MOUSE /boot/config-2.6.12 CONFIG_INPUT_MOUSEDEV=m CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_INPORT=m # CONFIG_MOUSE_ATIXL is not set CONFIG_MOUSE_LOGIBM=m CONFIG_MOUSE_PC110PAD=m CONFIG_MOUSE_VSXXXAA=m CONFIG_USB_MOUSE=m CONFIG_USB_IDMOUSE=m In dmesg findet sich: input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 lsmod sagt: Module Size Used by psmouse 31396 0 mga 60128 0 drm 68308 1 mga apm 20748 0 ipv6 262848 8 ohci_hcd 21380 0 usbcore 122588 2 ohci_hcd agpgart 35688 1 drm dm_mod 60828 0 opl3 15980 0 sb 13060 0 sb_lib 49700 1 sb uart401 11428 1 sb_lib sound 80780 3 opl3,sb_lib,uart401 soundcore 9760 2 sb_lib,sound ide_scsi 17764 0 ide_cd 43268 0 cdrom 40768 1 ide_cd 8139too 26304 0 mii 5760 1 8139too af_packet 22248 2 lp 12228 0 parport_pc 36772 1 parport 37128 2 lp,parport_pc genrtc 8488 0 isofs 37560 0 ide_disk 18752 8 ide_generic 1216 0 [permanent] sis5513 16552 0 [permanent] trm290 4260 0 [permanent] via82cxxx 13884 0 [permanent] triflex 3712 0 [permanent] slc90e66 5728 0 [permanent] siimage 12480 0 [permanent] serverworks 9096 0 [permanent] rz1000 2464 0 [permanent] sc1200 7360 0 [permanent] piix 10372 0 [permanent] pdc202xx_old 11232 0 [permanent] pdc202xx_new 9312 0 [permanent] opti621 4388 0 [permanent] hpt366 20448 0 [permanent] ns87415 4296 0 [permanent] hpt34x 5184 0 [permanent] generic 3840 0 [permanent] cy82c693 4740 0 [permanent] cmd64x 11964 0 [permanent] cs5520 4608 0 [permanent] cs5530 5376 0 [permanent] atiixp 5936 0 [permanent] amd74xx 14428 0 [permanent] alim15x3 12332 0 [permanent] aec62xx 7392 0 [permanent] ide_core 130708 29 ide_scsi,ide_cd,ide_disk,ide_generic, sis5513,trm290,via82cxxx,triflex,slc90e66,siimage,serverworks,rz1000,sc1200, piix,pdc202xx_old,pdc202xx_new,opti621,hpt366,ns87415,hpt34x,generic,cy82c693, cmd64x,cs5520,cs5530,atiixp,amd74xx,alim15x3,aec62xx sd_mod 19696 0 ata_piix 9700 0 libata 49668 1 ata_piix scsi_mod 138824 3 ide_scsi,sd_mod,libata unix 28016 190 ext3 142152 4 mbcache 9316 1 ext3 jbd 56984 1 ext3 Und das /etc/X11/XF86Config-4 ist eine seit Jahren bewährte Konfiguration: Section "InputDevice" Identifier "PS/2 Mouse" Driver "mouse" Option "Protocol" "auto" Option "ZAxisMapping" "4 5" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "true" Option "Emulate3Timeout" "70" Option "SendCoreEvents" "true" EndSection Was läuft falsch? Was muss ich machen? Danke Matthias -- Don't panic -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)