Hallo zusammen, um einen alten Thread aufzuwaermen: Bei mir laeuft trotz 2.6.13 kernel und aktueller debian testing installation die Pinnacle 300i nicht vollstaendig.
Analog geht. In Braunschweig lebend, bringt das aber nur 4 Sender in schlechter Qualitaet. Digital erkennt laut /var/log/messages mein System die Karte. Allerdings muss ich manuell einige Module fuer DVB laden: # modprobe saa7134-dvb # modprobe i2c_algo_bit # modprobe dvb_pll # modprobe tveeprom # modprobe i2c_sensor # modprobe i2c_dev # modprobe i2c_core # modprobe budget_ci Devices: # ls -l /dev/dvb/adapter0/ total 0 crw-rw---- 1 root video 212, 4 Sep 10 10:41 demux0 crw-rw---- 1 root video 212, 5 Sep 10 10:41 dvr0 crw-rw---- 1 root video 212, 3 Sep 10 10:41 frontend0 crw-rw---- 1 root video 212, 7 Sep 10 10:41 net0 Fehlen da nicht ein audio0 und video0? Ein scan (aus den dvb-utils) mit der mitgelieferten Braunschweiger channels.conf scheint kein Signal zu erhaschen: # scan /home/cfi/channels.conf -v scanning /home/cfi/channels.conf using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 198500000 1 3 0 1 1 3 0 initial transponder 490000000 0 2 0 1 1 3 0 initial transponder 498000000 0 2 0 1 1 3 0 initial transponder 594000000 0 2 0 1 1 3 0 initial transponder 658000000 0 2 0 1 1 3 0 initial transponder 786000000 0 2 0 1 1 3 0 >>> tune to: 198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_NONE:QAM_16:TRANSMISSI ON_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! [..] Hat jemand eine Idee was ich mir anschauen koennte um dem Fehler auf die Schliche zu kommen? Alles was ich bisher gefunden habe geht davon aus, dass scan funktioniert sobald die Hardware erkannt wurde (und eine Antenne angeschlossen ist ;-) Viele Gruesse, Ingo Hier noch ein paar Daten zum System: # lsmod Module Size Used by budget_ci 14464 0 budget_core 9924 1 budget_ci saa7146 18440 2 budget_ci,budget_core ttpci_eeprom 2624 1 budget_core stv0299 11912 1 budget_ci i2c_dev 9920 0 i2c_sensor 3456 0 tveeprom 11856 0 dvb_pll 9412 0 i2c_algo_bit 9672 0 saa7134_dvb 8580 0 mt352 6916 1 saa7134_dvb video_buf_dvb 6532 1 saa7134_dvb dvb_core 85096 3 budget_ci,budget_core,video_buf_dvb crc32 4352 1 dvb_core tda1004x 16516 2 budget_ci,saa7134_dvb firmware_class 10624 3 budget_ci,saa7134_dvb,tda1004x saa7134 116500 1 saa7134_dvb ipv6 270336 8 nfsd 237280 9 exportfs 6272 1 nfsd lockd 65992 2 nfsd sunrpc 150532 12 nfsd,lockd lp 11908 0 af_packet 22856 2 ns558 5508 0 gameport 15560 2 ns558 snd_mpu401 6472 0 snd_mpu401_uart 7872 1 snd_mpu401 snd_rawmidi 26208 1 snd_mpu401_uart snd_seq_device 8844 1 snd_rawmidi parport_pc 37060 1 parport 38280 2 lp,parport_pc pcspkr 3608 0 rtc 13560 1 tda9887 13584 0 tuner 37608 0 video_buf 22276 3 saa7134_dvb,video_buf_dvb,saa7134 v4l2_common 5824 1 saa7134 v4l1_compat 14916 1 saa7134 ir_common 8260 1 saa7134 videodev 9728 1 saa7134 shpchp 99236 0 pci_hotplug 29940 1 shpchp generic 4420 0 [permanent] amd74xx 14364 0 [permanent] snd_intel8x0 34368 2 snd_ac97_codec 86908 1 snd_intel8x0 snd_pcm_oss 54752 0 snd_mixer_oss 20096 3 snd_pcm_oss snd_pcm 95496 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 26436 1 snd_pcm snd 57220 10 snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97 _codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 9952 4 saa7134,snd snd_page_alloc 10952 2 snd_intel8x0,snd_pcm ehci_hcd 35912 0 sg 39520 0 sr_mod 17892 0 ohci_hcd 22468 0 i2c_nforce2 6976 0 i2c_core 22032 15 budget_ci,budget_core,ttpci_eeprom,stv0299,i2c_dev,i2c_sensor,tveeprom,i2c_ algo_bit,saa7134_dvb,mt352,tda1004x,saa7134,tda9887,tuner,i2c_nforce2 tsdev 7616 0 mousedev 11872 1 evdev 9536 0 psmouse 35588 0 ide_generic 1216 0 [permanent] ide_disk 19008 0 ide_cd 43780 0 cdrom 40544 2 sr_mod,ide_cd forcedeth 20032 0 ext3 142856 10 jbd 61144 1 ext3 dm_mod 60860 11 ide_scsi 18180 0 sd_mod 20176 9 sata_nv 9348 5 libata 49988 1 sata_nv usb_storage 67008 0 usbcore 127996 4 ehci_hcd,ohci_hcd,usb_storage scsi_mod 140776 6 sg,sr_mod,ide_scsi,sd_mod,libata,usb_storage ide_core 130856 7 generic,amd74xx,ide_generic,ide_disk,ide_cd,ide_scsi,usb_storage raid0 8832 2 md_mod 68112 3 raid0 unix 29488 608 /var/log/messages sieht gut aus: Sep 10 09:55:29 localhost kernel: saa7130/34: v4l2 driver version 0.2.14 loaded Sep 10 09:55:29 localhost kernel: ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58 Sep 10 09:55:29 localhost kernel: saa7134[0]: found at 0000:05:08.0, rev: 1, irq: 58, latency: 32, mmio: 0xd0000000 Sep 10 09:55:29 localhost kernel: saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,insmod option] Sep 10 09:55:29 localhost kernel: saa7134[0]: board init: gpio is c806000 Sep 10 09:55:29 localhost kernel: : chip found @ 0xc0 (saa7134[0]) Sep 10 09:55:29 localhost kernel: : Returned more than 5 bytes. It is not a TEA5767 Sep 10 09:55:29 localhost kernel: tuner 2-0060: microtune: companycode=3cbf part=42 rev=a4 Sep 10 09:55:29 localhost kernel: tuner 2-0060: microtune MT2050 found, OK Sep 10 09:55:29 localhost kernel: tda9885/6/7: chip found @ 0x86 Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92 Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff Sep 10 09:55:29 localhost kernel: saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Sep 10 09:55:30 localhost kernel: saa7134[0]: registered device video0 [v4l2] Sep 10 09:55:30 localhost kernel: saa7134[0]: registered device vbi0 Sep 10 10:11:23 localhost -- MARK -- Sep 10 10:31:24 localhost -- MARK -- Sep 10 10:41:27 localhost kernel: saa7134[0]: pinnacle 300i dvb setup Sep 10 10:41:27 localhost kernel: DVB: registering new adapter (saa7134[0]). Sep 10 10:41:27 localhost kernel: DVB: registering frontend 0 (Zarlink MT352 DVB-T)... Sep 10 11:04:57 localhost kernel: saa7134[0]: mt352_pinnacle_init called Sep 10 11:05:50 localhost last message repeated 20 times Sep 10 11:07:58 localhost kernel: saa7134[0]: mt352_pinnacle_init called Sep 10 11:31:24 localhost -- MARK -- Sep 10 11:32:11 localhost kernel: saa7134[0]: mt352_pinnacle_init called Sep 10 11:32:42 localhost last message repeated 35 times Sep 10 11:32:49 localhost last message repeated 6 times Sep 10 11:41:59 localhost kernel: i2c /dev entries driver Sep 10 11:42:10 localhost kernel: saa7146: register extension 'budget_ci dvb'. Sep 10 11:42:54 localhost kernel: saa7134[0]: mt352_pinnacle_init called Sep 10 11:43:24 localhost last message repeated 34 times Sep 10 11:43:31 localhost last message repeated 7 times Sep 10 11:45:24 localhost last message repeated 45 times Sep 10 11:45:35 localhost last message repeated 11 times -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
