Hallo, ich hab das hier schon alles auf der isdn4linux Mailingliste gepostet, nur leider schon eine Woche lang keine Antworten bekommen. Vielleicht kann mir ja hier einer helfen oder mir sagen, wen ich am besten fragen sollte.
Viele Grüße Andreas ---------- Forwarded message ---------- From: Andreas Potschka Date: Oct 5, 2005 11:36 AM Subject: Problems with HiSax and AVMA1 PCMCIA To: [EMAIL PROTECTED] Hi, after a hard disk crash and installation of a fresh Debian Sarge, kernel 2.6.8, I have problems with my AVM A1 PCMCIA ISDN Controller. When I insert the card into the PCMCIA slot, I get the following messages on tty1: (I'm typing this here because I can't access the internet from my laptop, so there can be typos.) cs: memory probe 0xa0000000-0xa0ffffff: clean. CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 avma1_cs: testing i/o 0x140-0x147 avma1_cs: checking at i/o 0x140, irq 5 HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM A1 PCMCIA driver Rev. 2.9.2.5 AVM A1 PCMCIA: io 0x140 irq 5 model 1 version 2 AVM A1 PCMCIA: ISAC version (0): 2086/2186 V1.1 AVM A1 PCMCIA: HSCX version A: V2.1 B: V2.1 AVM A1 (PCMCIA): IRQ 5 count 2 AVM A1 (PCMCIA): IRQ 5 count 5 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added HiSax: if_command 6 called with invalid driverId 0! HiSax: if_command 6 called with invalid driverId 0! The last two lines do not appear in /var/log/messages. After that, there are no files like ippp0, isdninfo, or isdnctrl in /dev/ and I can't use the card. I run udev and hotplug. Any idea how to make this work? Regards Andreas
