Hallo zusammen, so langsam nervt es mich ... :-) Mein DVD klappt ned.
worf:~# cat /proc/version Linux version 2.6.14 ([EMAIL PROTECTED]) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 SMP Mon Oct 31 15:09:24 CET 2005 Bei dmesg gibt es die Meldung ports already in use skipping probe. Jetzt ist da leider das DVD angeschlossen. Weiß jeman Rat ? Grüße Michael Ausgabe von dmesg : libata version 1.12 loaded. ata_piix version 1.04 ata_piix: combined mode detected ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.2[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1880 irq 14 ata1: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:207f ata1: dev 0 ATA, max UDMA/133, 156312576 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: WDC WD800JD-08JN Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) SCSI device sda: drive cache: write back SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 ata2: dev 0 cfg 49:0f00 82:4210 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix ReiserFS: sda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k EXT3 FS on sda1, internal journal Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe
