On Sat, Aug 17, 2002 at 05:20:59PM +0200, J�rg Sch�tter wrote: > Hallo Marco, > > was liefert > scp -v source destination > bzw > sftp -v localhost
Hallo J�rg, marco@lurkabove:~$ sftp -v localhost Connecting to localhost... OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL 0x0090603f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/marco/.ssh/id_rsa type -1 debug1: identity file /home/marco/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.4p1 Debian 1:3.4p1-1 debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH* Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.4p1 Debian 1:3.4p1-1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 132/256 debug1: bits set: 1602/3191 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /home/marco/.ssh/known_hosts:2 debug1: bits set: 1575/3191 debug1: ssh_rsa_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: service_accept: ssh-userauth debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password,keyboard-interactive debug1: next auth method to try is publickey debug1: try privkey: /home/marco/.ssh/id_rsa debug1: try privkey: /home/marco/.ssh/id_dsa debug1: next auth method to try is keyboard-interactive debug1: authentications that can continue: publickey,password,keyboard-interactive debug1: next auth method to try is password marco@localhost's password: Nach Eingabe des Passworts: debug1: ssh-userauth2 successful: method password debug1: fd 4 setting O_NONBLOCK debug1: channel 0: new [client-session] debug1: send channel open 0 debug1: Entering interactive session. debug1: ssh_session2_setup: id 0 debug1: Sending subsystem: sftp debug1: channel request 0: subsystem debug1: channel 0: open confirm rwindow 0 rmax 32768 Received message too long 170732845 marco@lurkabove:~$ debug1: channel 0: read<=0 rfd 4 len -1 debug1: channel 0: read failed debug1: channel 0: close_read debug1: channel 0: input open -> drain debug1: channel 0: ibuf empty debug1: channel 0: send eof debug1: channel 0: input drain -> closed debug1: channel 0: write failed debug1: channel 0: close_write debug1: channel 0: output open -> closed debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: rcvd eof debug1: channel 0: rcvd close debug1: channel 0: almost dead debug1: channel 0: gc: notify user debug1: channel 0: gc: user detached debug1: channel 0: send close debug1: channel 0: is dead debug1: channel 0: garbage collecting debug1: channel_free: channel 0: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.5 seconds debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0 debug1: Exit status 0 und f�r scp: marco@lurkabove:~$ scp -v ./test marco@localhost:/tmp Executing: program /usr/bin/ssh host localhost, user marco, command scp -v -t /tmp OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL 0x0090603f debug1: Reading configuration data /etc/ssh/ssh_config debug1: Rhosts Authentication disabled, originating port will not be trusted. debug1: ssh_connect: needpriv 0 debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/marco/.ssh/identity type -1 debug1: identity file /home/marco/.ssh/id_rsa type -1 debug1: identity file /home/marco/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_3.4p1 Debian 1:3.4p1-1 debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-1 pat OpenSSH* Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_3.4p1 Debian 1:3.4p1-1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 118/256 debug1: bits set: 1568/3191 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /home/marco/.ssh/known_hosts:2 debug1: bits set: 1620/3191 debug1: ssh_rsa_verify: signature correct debug1: kex_derive_keys debug1: newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: waiting for SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: service_accept: ssh-userauth debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: authentications that can continue: publickey,password,keyboard-interactive debug1: next auth method to try is publickey debug1: try privkey: /home/marco/.ssh/identity debug1: try privkey: /home/marco/.ssh/id_rsa debug1: try privkey: /home/marco/.ssh/id_dsa debug1: next auth method to try is keyboard-interactive debug1: authentications that can continue: publickey,password,keyboard-interactive debug1: next auth method to try is password marco@localhost's password: Und hier nach Eingabe des Passworts: debug1: ssh-userauth2 successful: method password debug1: fd 4 setting O_NONBLOCK debug1: fd 5 setting O_NONBLOCK debug1: channel 0: new [client-session] debug1: send channel open 0 debug1: Entering interactive session. debug1: ssh_session2_setup: id 0 debug1: Sending command: scp -v -t /tmp debug1: channel request 0: exec debug1: channel 0: open confirm rwindow 0 rmax 32768 ------------- marco@lurkabove:~$ debug1: channel 0: read<=0 rfd 4 len 0 debug1: channel 0: read failed debug1: channel 0: close_read debug1: channel 0: input open -> drain debug1: channel 0: ibuf empty debug1: channel 0: send eof debug1: channel 0: input drain -> closed debug1: channel 0: write failed debug1: channel 0: close_write debug1: channel 0: output open -> closed bash: fortune: command not found KDGKBLED: Das Argument ist ung�ltig Error reading current flags setting. Maybe you are not on the console? stty: Standardeingabe: Das Argument ist ung�ltig debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: rcvd eof debug1: channel 0: rcvd close debug1: channel 0: almost dead debug1: channel 0: gc: notify user debug1: channel 0: gc: user detached debug1: channel 0: send close debug1: channel 0: is dead debug1: channel 0: garbage collecting debug1: channel_free: channel 0: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.6 seconds debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0 debug1: Exit status 0 Die drei Zeilen bash: fortune: command not found KDGKBLED: Das Argument ist ung�ltig Error reading current flags setting. Maybe you are not on the console? erscheinen auch in jedem X-Term. Die h�ngen mit diesem Problem nicht zusammen. Allerdings lese ich aus diesen Fehlermeldungen noch nichts heraus. Du vielleicht? Ciao Marco -- Feel disillusioned? I've got some great new illusions ... -- Marco Herrn [EMAIL PROTECTED] (GnuPG/PGP-signed and crypted mail preferred) Key ID: 0x94620736 -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
