-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hallo @ All!
Ich habe hier auf einmal ein Prob mit meinem hama Card Reader und zwar in der Form, als das ich ihn nicht ansprechen kann! `------------------------------------------------------------------------------ | debian:/home/niels# lsusb -v | | Bus 001 Device 001: ID 0000:0000 | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 1.00 | bDeviceClass 9 Hub | bDeviceSubClass 0 Unused | bDeviceProtocol 0 | bMaxPacketSize0 8 | idVendor 0x0000 | idProduct 0x0000 | bcdDevice 0.00 | iManufacturer 0 | iProduct 2 USB UHCI Root Hub | iSerial 1 fce0 | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 25 | bNumInterfaces 1 | bConfigurationValue 1 | iConfiguration 0 | bmAttributes 0x40 | Self Powered | MaxPower 0mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 1 | bInterfaceClass 9 Hub | bInterfaceSubClass 0 Unused | bInterfaceProtocol 0 | iInterface 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0008 1x 8 bytes | bInterval 255 | Hub Descriptor: | bLength 9 | bDescriptorType 41 | nNbrPorts 2 | wHubCharacteristic 0x0000 | Ganged power switching | Ganged overcurrent protection | bPwrOn2PwrGood 1 * 2 milli seconds | bHubContrCurrent 0 milli Ampere | DeviceRemovable 0x08 | PortPwrCtrlMask 0xe8 | Hub Port Status: | Port 1: 0000.0100 power | Port 2: 0000.0103 power enable connect | Bus 001 Device 002: ID 0dda:2005 Integrated Circuit Solution, Inc. | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 2.00 | bDeviceClass 0 (Defined at Interface level) | bDeviceSubClass 0 | bDeviceProtocol 0 | bMaxPacketSize0 64 | idVendor 0x0dda Integrated Circuit Solution, Inc. | idProduct 0x2005 | bcdDevice 93.17 | iManufacturer 3 Hama | iProduct 4 Card Reader | iSerial 5 000000000013 | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 32 | bNumInterfaces 1 | bConfigurationValue 1 | iConfiguration 0 | bmAttributes 0x80 | MaxPower 500mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 2 | bInterfaceClass 8 Mass Storage | bInterfaceSubClass 6 SCSI | bInterfaceProtocol 80 Bulk (Zip) | iInterface 6 ?i?|?? | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0040 1x 64 bytes | bInterval 0 | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x02 EP 2 OUT | bmAttributes 2 | Transfer Type Bulk | Synch Type None | Usage Type Data | wMaxPacketSize 0x0040 1x 64 bytes | bInterval 0 | Device Qualifier (for other device speed): | bLength 10 | bDescriptorType 6 | bcdUSB 2.00 | bDeviceClass 0 (Defined at Interface level) | bDeviceSubClass 0 | bDeviceProtocol 0 | bMaxPacketSize0 64 | bNumConfigurations 1 | | | debian:/home/niels# lsmod | Module Size Used by Not tainted | soundcore 3940 0 (autoclean) | input 3648 0 (autoclean) | apm 9964 1 (autoclean) | parport_pc 23880 1 (autoclean) | lp 6724 0 (autoclean) | parport 26504 1 (autoclean) [parport_pc lp] | af_packet 13000 1 (autoclean) | usb-storage 65088 0 (unused) | usb-uhci 23344 0 (unused) | usbcore 62924 1 [usb-storage usb-uhci] | ide-scsi 10032 0 | scsi_mod 95108 2 [usb-storage ide-scsi] | 3c59x 27152 1 | agpgart 46244 0 (unused) | ide-cd 31296 1 | cdrom 29828 0 [ide-cd] | rtc 6440 0 (autoclean) | ext3 81068 1 (autoclean) | jbd 42468 1 (autoclean) [ext3] | ide-detect 288 0 (autoclean) (unused) | piix 9096 1 (autoclean) | ide-disk 16800 2 (autoclean) | ide-core 108568 3 (autoclean) [usb-storage ide-scsi ide-cd ide-detect piix ide-disk] | unix 14960 219 (autoclean) `--------------------------------------------------------------------------------------------------------------------- Also, da ist das gute Stück ja und usb Module sind doch auch da, aber warum komme ich nicht an die Daten (Fotos) auf der SD? Ein raus und wieder reinstöpseln (Karte/Reader) hat nichts gebracht! Und nach einem manuellen /mount -t vfat /dev/sda/media/cardreader /hat sich auchg nichts getan! Wer weiss Rat und Hilfe? Besten Dank im voraus Niels -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEF+P2ZdugMcut97URAoV4AJ9N6saU++YojqbRLGyKUrxU4veVvgCfcD/S P+NxRdILoGuGC6NyBHCpnzs= =h3x9 -----END PGP SIGNATURE----- -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
