Hallo, hat wer 'ne Idee, warum ich bei mir mit meiner Artec-Karte und einem 2.6.16.1 nicht weiter komme (unter einem 2.6.12-er ging's noch)
Das Ding meldet sich als # lsusb -s 3:5 Bus 003 Device 005: ID 10b8:0bb9 DiBcom DiBcom USB DVB-T reference design (MOD300) (warm) Das ganze passiert unter einem selbstgebauten Kernel 1> uname -r 2.6.16.1pichuco ~:1> lsmod | egrep '(dvb|usb)' dvb_usb_dibusb_mb 12288 0 dvb_usb_dibusb_common 7940 1 dvb_usb_dibusb_mb dib3000mc 15872 1 dvb_usb_dibusb_common dvb_usb 18952 2 dvb_usb_dibusb_mb,dvb_usb_dibusb_common dvb_core 80448 1 dvb_usb firmware_class 10496 1 dvb_usb dvb_pll 11652 3 dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb dib3000mb 14080 1 dvb_usb_dibusb_mb i2c_core 21760 4 i2c_i801,dvb_usb_dibusb_mb,dvb_usb,dib3000_common usbhid 37984 0 usblp 13696 0 usbcore 137632 7 dvb_usb_dibusb_mb,dvb_usb,usbhid,uhci_hcd,ehci_hcd,usblp Meldungen vom Ab- und Anstecken: Apr 10 23:14:51 Pichuco kernel: usb 3-2: USB disconnect, address 3 Apr 10 23:14:51 Pichuco kernel: dvb-usb: DiBcom USB1.1 DVB-T reference design (MOD3000) successfully deinitialized and disconnected. Apr 10 23:14:55 Pichuco kernel: usb 3-2: new full speed USB device using uhci_hcd and address 4 Apr 10 23:14:55 Pichuco kernel: usb 3-2: configuration #1 chosen from 1 choice Apr 10 23:14:55 Pichuco kernel: dvb-usb: found a 'Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)' in cold state, will try to load a firmware Apr 10 23:14:55 Pichuco kernel: dvb-usb: downloading firmware from file 'dvb-usb-dibusb-an2235-01.fw' Apr 10 23:14:55 Pichuco usb.agent[7582]: dvb-usb-dibusb-mb: already loaded Apr 10 23:14:56 Pichuco kernel: usb 3-2: USB disconnect, address 4 Apr 10 23:14:56 Pichuco kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Apr 10 23:14:58 Pichuco kernel: usb 3-2: new full speed USB device using uhci_hcd and address 5 Apr 10 23:14:58 Pichuco kernel: usb 3-2: Product: MOD3000 BOX Apr 10 23:14:58 Pichuco kernel: usb 3-2: Manufacturer: DiBcom SA Apr 10 23:14:58 Pichuco kernel: usb 3-2: configuration #1 chosen from 1 choice Apr 10 23:14:58 Pichuco kernel: dvb-usb: found a 'DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm state. Apr 10 23:14:58 Pichuco kernel: dvb-usb: will use the device's hardware PID filter (table count: 16). Apr 10 23:14:58 Pichuco kernel: DVB: registering new adapter (DiBcom USB1.1 DVB-T reference design (MOD3000)). Apr 10 23:14:58 Pichuco kernel: DVB: registering frontend 0 (DiBcom 3000M-B DVB-T)... Apr 10 23:14:58 Pichuco kernel: dibusb: This device has the Panasonic ENV77H11D5 onboard. Apr 10 23:14:58 Pichuco kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Apr 10 23:14:58 Pichuco kernel: dvb-usb: schedule remote query interval to 150 msecs. Apr 10 23:14:58 Pichuco kernel: dvb-usb: DiBcom USB1.1 DVB-T reference design (MOD3000) successfully initialized and connected. Apr 10 23:14:58 Pichuco usb.agent[7694]: dvb-usb-dibusb-mb: already loaded Es sieht so aus als könne er die Firmware laden... xine. bleibt beim Zugriff schlicht stehen. mplayer meldet kontinuierlich [...] dvb_streaming_read, attempt N. 2 failed with errno 0 when reading 2048 bytes [...] Etwas ratlos -- Peter -- [EMAIL PROTECTED] ConSol* Software GmbH Phone +49 89 45841-100 Consulting & Solutions Mobile +49 177 6040121 Franziskanerstr. 38 http://www.consol.de D-81669 München
