* Andreas Pakulat: > Ich hatte nach deinem Post den Verdacht das es damit zusammenhaengen > koennte, da gdm in Sessions/Xsession und Xsession GDM_LANG auswertet und > dabei LANGUAGE "unsettet" sowie "irgendwas" mit LANG treibt...
Was ich feststellen konnte ist, daß LANGUAGE, auf en_US gesetzt, ziemlich viele Programme aus Englisch umschaltet (aber nicht alle), unter anderem auch gdm. Die locale-Variablen werden dabei aber nicht verändert. GDM_LANG ändert hingegen nur die Sprache von gdm. > Kannst du mal bitte deine ganze gdm.conf posten und sonst alle > gdm-Konfig-Dateien in /etc/gdm die du geaendert hast? > > Eventuell auch mal aus /etc/X11/Xsession das posten was du geaendert > hast? Bei letzterem ist alles Standard. Die gdm.conf folgt. Vor dem Ausprobieren ist es wohl sinnvoll, das graphische Theme und die Sounds zurückzustellen, und der X-Aufruf funktioniert nur mit installiertem xkb-data, sonst erst die xkbdir-Option entfernen. ,----[ gdm.conf ]- | # GDM Configuration file. You can use gdmsetup program to graphically | # edit this, or you can optionally just edit this file by hand. Note that | # gdmsetup does not tweak every option here, just the ones most users | # would care about. Rest is for special setups and distro specific | # tweaks. If you edit this file, you should run: | # /etc/init.d/gdm reload or /etc/init.d/gdm restart | | # For full reference documentation see the gnome help browser under | # GNOME|System category. You can also find the docs in HTML form on | # http://www.gnome.org/projects/gdm/ | # | # NOTE: Some of these are commented out but still show their default values. | # If you wish to change them you must remove the '#' from the beginning of | # the line. The commented out lines are lines where the default might | # change in the future, so set them one way or another if you feel | # strongly about it. | # | # Have fun! - George | | [daemon] | # Automatic login, if true the first local screen will automatically logged | # in as user as set with AutomaticLogin key. | AutomaticLoginEnable=false | AutomaticLogin= | | # Timed login, useful for kiosks. Log in a certain user after a certain | # amount of time | TimedLoginEnable=false | TimedLogin= | TimedLoginDelay=30 | | # The gdm configuration program that is run from the login screen, you should | # probably leave this alone | #Configurator=/usr/sbin/gdmsetup --disable-sound --disable-crash-dialog | | # The chooser program. Must output the chosen host on stdout, probably you | # should leave this alone | #Chooser=/usr/lib/gdm/gdmchooser | | # The greeter for local (non-xdmcp) logins. Change gdmlogin to gdmgreeter to | # get the new graphical greeter. | Greeter=/usr/lib/gdm/gdmgreeter | | # The greeter for xdmcp logins, usually you want a less graphically intensive | # greeter here so it's better to leave this with gdmlogin | #RemoteGreeter=/usr/lib/gdm/gdmlogin | | # Launch the greeter with an additional list of colon seperated gtk | # modules. This is useful for enabling additional feature support | # e.g. gnome accessibility framework. Only "trusted" modules should | # be allowed to minimise security holes | #AddGtkModules=false | AddGtkModules=true | # By default these are the accessibility modules | #GtkModulesList=gail:atk-bridge:/usr/lib/gtk-2.0/modules/libdwellmouselistener:/usr/lib/gtk-2.0/modules/libkeymouselistener | GtkModulesList=gail:atk-bridge:/usr/lib/gtk-2.0/modules/libkeymouselistener:/usr/lib/gtk-2.0/modules/libdwellmouselistener | | # Default path to set. The profile scripts will likely override this | DefaultPath=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games | # Default path for root. The profile scripts will likely override this | RootPath=/usr/local/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/bin/X11:/usr/games | | # If you are having trouble with using a single server for a long time and | # want gdm to kill/restart the server, turn this on | AlwaysRestartServer=true | | # User and group used for running gdm GUI applicaitons. By default this | # is set to user gdm and group gdm. This user/group should have very | # limited permissions and access to ony the gdm directories and files. | User=gdm | Group=gdm | | # To try to kill all clients started at greeter time or in the Init script. | # doesn't always work, only if those clients have a window of their own | #KillInitClients=true | LogDir=/var/log/gdm | # You should probably never change this value unless you have a weird setup | PidFile=/var/run/gdm.pid | # Note that a post login script is run before a PreSession script. | # It is run after the login is successful and before any setup is | # run on behalf of the user | PostLoginScriptDir=/etc/gdm/PostLogin/ | PreSessionScriptDir=/etc/gdm/PreSession/ | PostSessionScriptDir=/etc/gdm/PostSession/ | DisplayInitDir=/etc/gdm/Init | # Distributions: If you have some script that runs an X server in say | # VGA mode, allowing a login, could you please send it to me? | #FailsafeXServer= | # if X keeps crashing on us we run this script. The default one does a bunch | # of cool stuff to figure out what to tell the user and such and can | # run an X configuration program. | XKeepsCrashing=/etc/gdm/XKeepsCrashing | # Reboot, Halt and suspend commands, you can add different commands | # separated by a semicolon and gdm will use the first one it can find | RebootCommand=/sbin/shutdown -r now \"Rebooted from gdm menu.\" | HaltCommand=/sbin/shutdown -h now \"Shut Down from gdm menu.\" | SuspendCommand=/usr/bin/apm --suspend | # Probably should not touch the below this is the standard setup | ServAuthDir=/var/lib/gdm | # This is our standard startup script. A bit different from a normal | # X session, but it shares a lot of stuff with that. See the provided | # default for more information. | BaseXsession=/etc/gdm/Xsession | # This is a directory where .desktop files describing the sessions live | # It is really a PATH style variable since 2.4.4.2 to allow actual | # interoperability with KDM. Note that <sysconfdir>/dm/Sessions is there | # for backwards compatibility reasons with 2.4.4.x | SessionDesktopDir=/etc/X11/sessions/:/etc/dm/Sessions/:/usr/share/gdm/BuiltInSessions/:/usr/share/xsessions/ | # This is the default .desktop session. One of the ones in SessionDesktopDir | DefaultSession=default.desktop | # Better leave this blank and HOME will be used. You can use syntax ~/ below | # to indicate home directory of the user. You can also set this to something | # like /tmp if you don't want the authorizations to be in home directories. | # This is useful if you have NFS mounted home directories. Note that if this | # is the home directory the UserAuthFBDir will still be used in case the home | # directory is NFS, see security/NeverPlaceCookiesOnNFS to override this behaviour. | UserAuthDir= | # Fallback if home directory not writable | UserAuthFBDir=/tmp | UserAuthFile=.Xauthority | # The X server to use if we can't figure out what else to run. | StandardXServer=/usr/X11R6/bin/X | # The maximum number of flexible X servers to run. | #FlexibleXServers=5 | # And after how many minutes should we reap the flexible server if there is | # no activity and no one logged on. Set to 0 to turn off the reaping. | # Does not affect Xnest flexiservers. | #FlexiReapDelayMinutes=5 | # the X nest command | Xnest=/usr/X11R6/bin/Xnest -audit 0 -name Xnest | # Automatic VT allocation. Right now only works on Linux. This way | # we force X to use specific vts. turn VTAllocation to false if this | # is causing problems. | FirstVT=7 | VTAllocation=true | # Should double login be treated with a warning (and possibility to change | # vts on linux and freebsd systems for console logins) | #DoubleLoginWarning=true | # Should a second login always resume the current session and | # switch vts on linux and freebsd systems for console logins | #AlwaysLoginCurrentSession=true | | # If true then the last login information is printed to the user before | # being prompted for password. While this gives away some info on what | # users are on a system, it on the other hand should give the user an | # idea of when they logged in and if it doesn't seem kosher to them, | # they can just abort the login and contact the sysadmin (avoids running | # malicious startup scripts) | DisplayLastLogin=true | | # Program used to play sounds. Should not require any 'daemon' or anything | # like that as it will be run when no one is logged in yet. | SoundProgram=/usr/bin/aplay | | # These are the languages that the console cannot handle because of font | # issues. Here we mean the text console, not X. This is only used | # when there are errors to report and we cannot start X. | # This is the default: | #ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zh | | # This determines whether gdm will honor requests DYNAMIC requests from | # the gdmdynamic command. | #DynamicXServers=false | | # This determines whether gdm will send notifications to the console | #ConsoleNotify=true | | [security] | AllowRoot=false | AllowRemoteRoot=false | # This will allow remote timed login | AllowRemoteAutoLogin=false | # 0 is the most restrictive, 1 allows group write permissions, 2 allows all | # write permissions | RelaxPermissions=0 | # Check if directories are owned by logon user. Set to false, if you have, for | # example, home directories owned by some other user. | CheckDirOwner=true | # Number of seconds to wait after a bad login | #RetryDelay=1 | # Maximum size of a file we wish to read. This makes it hard for a user to DoS | # us by using a large file. | #UserMaxFile=65536 | # If true this will basically append -nolisten tcp to every X command line, | # a good default to have (why is this a "negative" setting? because if | # it is false, you could still not allow it by setting command line of | # any particular server). It's probably better to ship with this on | # since most users will not need this and it's more of a security risk | # then anything else. | # Note: Anytime we find a -query or -indirect on the command line we do | # not add a "-nolisten tcp", as then the query just wouldn't work, so | # this setting only affects truly local sessions. | DisallowTCP=true | # By default never place cookies if we "detect" NFS. We detect NFS | # by detecting "root-squashing". It seems bad practice to place | # cookies on things that go over the network by default and thus we | # don't do it by default. Sometimes you can however use safe remote | # filesystems where this is OK and you may want to have the cookie in your | # home directory. | #NeverPlaceCookiesOnNFS=true | | # XDMCP is the protocol that allows remote login. If you want to log into | # gdm remotely (I'd never turn this on on open network, use ssh for such | # remote usage that). You can then run X with -query <thishost> to log in, | # or -indirect <thishost> to run a chooser. Look for the 'Terminal' server | # type at the bottom of this config file. | [xdmcp] | # Distributions: Ship with this off. It is never a safe thing to leave | # out on the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only | # allow local access is another alternative but not the safest. | # Firewalling port 177 is the safest if you wish to have xdmcp on. | # Read the manual for more notes on the security of XDMCP. | Enable=false | # Honour indirect queries, we run a chooser for these, and then redirect | # the user to the chosen host. Otherwise we just log the user in locally. | #HonorIndirect=true | # Maximum pending requests | #MaxPending=4 | #MaxPendingIndirect=4 | # Maximum open XDMCP sessions at any point in time | #MaxSessions=16 | # Maximum wait times | #MaxWait=15 | #MaxWaitIndirect=15 | # How many times can a person log in from a single host. Usually better to | # keep low to fend off DoS attacks by running many logins from a single | # host. This is now set at 2 since if the server crashes then gdm doesn't | # know for some time and wouldn't allow another session. | #DisplaysPerHost=2 | # The number of seconds after which a non-responsive session is logged off. | # Better keep this low. | #PingIntervalSeconds=15 | # The port. 177 is the standard port so better keep it that way | #Port=177 | # Willing script, none is shipped and by default we'll send | # hostname system id. But if you supply something here, the | # output of this script will be sent as status of this host so that | # the chooser can display it. You could for example send load, | # or mail details for some user, or some such. | #Willing=/etc/gdm/Xwilling | | [gui] | # The specific gtkrc file we use. It should be the full path to the gtkrc | # that we need. Unless you need a specific gtkrc that doesn't correspond to | # a specific theme, then just use the GtkTheme key | #GtkRC=/usr/share/themes/Default/gtk-2.0/gtkrc | | # The GTK+ theme to use for the gui | #GtkTheme=Default | # If to allow changing the GTK+ (widget) theme from the greeter. Currently | # this only affects the standard greeter as the graphical greeter does | # not yet have this ability | #AllowGtkThemeChange=true | # Comma separated list of themes to allow. These must be the names of the | # themes installed in the standard locations for gtk themes. You can | # also specify 'all' to allow all installed themes. These should be just | # the basenames of the themes such as 'Thinice' or 'LowContrast'. | #GtkThemesToAllow=all | | # Maximum size of an icon, larger icons are scaled down | #MaxIconWidth=128 | #MaxIconHeight=128 | | [greeter] | # Greeter has a nice title bar that the user can move | #TitleBar=true | # Configuration is available from the system menu of the greeter | #ConfigAvailable=true | # Face browser is enabled. This only works currently for the | # standard greeter as it is not yet enabled in the graphical greeter. | Browser=false | # The default picture in the browser | #DefaultFace=/usr/share/pixmaps/nobody.png | # User ID's less than the MinimalUID value will not be included in the | # face browser or in the gdmselection list for Automatic/Timed login. | # They will not be displayed regardless of the settings for | # Include and Exclude. | MinimalUID=1000 | # Users listed in Include will be included in the face browser and in | # the gdmsetup selection list for Automatic/Timed login. Users | # should be separated by commas. | #Include= | # Users listed in Exclude are excluded from the face browser and from | # the gdmsetup selection list for Automatic/Timed login. Excluded | # users will still be able to log in, but will have to type their | # username. Users should be separated by commas. | Exclude=nobody | # By default, an empty include list means display no users. By setting | # IncludeAll to true, the password file will be scanned and all users | # will be displayed except users excluded via the Exclude setting and | # user ID's less than MinimalUID. Scanning the password file can be | # slow on systems with large numbers of users and this feature should | # not be used in such environments. The setting of IncludeAll does | # nothing if Include is set to a non-empty value. | IncludeAll=true | # If user or user.png exists in this dir it will be used as his picture | #GlobalFaceDir=/usr/share/pixmaps/faces/ | # File which contains the locale we show to the user. Likely you want to use | # the one shipped with gdm and edit it. It is not a standard locale.alias file, | # although gdm will be able to read a standard locale.alias file as well. | LocaleFile=/etc/gdm/locale.conf | # Logo shown in the standard greeter | Logo=/usr/share/pixmaps/gdmDebianLogo.xpm | # The standard greeter should shake if a user entered the wrong username or | # password. Kind of cool looking | Quiver=true | # The Actions menu (formerly system menu) is shown in the greeter, this is the | # menu that contains reboot, shutdown, suspend, config and chooser. None of | # these is available if this is off. They can be turned off individually | # however | SystemMenu=true | # The Actions in the Actions menu require the root password | SecureSystemMenu=true | # Should the chooser button be shown. If this is shown, GDM can drop into | # chooser mode which will run the xdmcp chooser locally and allow the user | # to connect to some remote host. Local XDMCP does not need to be enabled | # however | #ChooserButton=true | # Welcome is for all console logins and RemoteWelcome is for remote logins | # (through XDMCP). | # DefaultWelcome and DefaultRemoteWelcome set the string for Welcome | # to "Welcome" and for DefaultWelcome to "Welcome to %n", and properly | # translate the message to the appropriate language. Note that %n gets | # translated to the hostname of the machine. These default values can | # be overridden by setting DefaultWelcome and/or DefaultRemoteWelcome to | # false, and setting the Welcome and DefaultWelcome values as desired. | # Just make sure the strings are in utf-8 Note to distributors, if you | # wish to have a different Welcome string and wish to have this | # translated you can have entries such as "Welcome[cs]=Vitejte na %n". | DefaultWelcome=true | DefaultRemoteWelcome=true | #Welcome=Welcome | #RemoteWelcome=Welcome to %n | # Don't allow user to move the standard greeter window. Only makes sense | # if TitleBar is on | #LockPosition=false | # Set a position rather then just centering the window. If you enter | # negative values for the position it is taken as an offset from the | # right or bottom edge. | #SetPosition=false | #PositionX=0 | #PositionY=0 | # Xinerama screen we use to display the greeter on. Not for true | # multihead, currently only works for Xinerama. | #XineramaScreen=0 | # Background settings for the standard greeter: | # Type can be 0=None, 1=Image, 2=Color | #BackgroundType=2 | #BackgroundImage= | #BackgroundScaleToFit=true | #BackgroundColor=#76848F | # XDMCP session should only get a color, this is the sanest setting since | # you don't want to take up too much bandwidth | #BackgroundRemoteOnlyColor=true | # Program to run to draw the background in the standard greeter. Perhaps | # something like an xscreensaver hack or some such. | #BackgroundProgram= | # if this is true then the background program is run always, otherwise | # it is only run when the BackgroundType is 0 (None) | #RunBackgroundProgramAlways=false | # Show the Failsafe sessions. These are much MUCH nicer (focus for xterm for | # example) and more failsafe then those supplied by scripts so distros should | # use this rather then just running an xterm from a script. | #ShowGnomeFailsafeSession=true | #ShowXtermFailsafeSession=true | # Normally there is a session type called 'Last' that is shown which refers to | # the last session the user used. If off, we will be in 'switchdesk' mode where | # the session saving stuff is disabled in GDM | #ShowLastSession=true | # Always use 24 hour clock no matter what the locale. | Use24Clock=false | # Use circles in the password field. Looks kind of cool actually, | # but only works with certain fonts. | UseCirclesInEntry=true | # Do not show any visible feedback in the password field. This is standard | # for instance in console, xdm and ssh. | #UseInvisibleInEntry=false | # These two keys are for the new greeter. Circles is the standard | # shipped theme. If you want gdm to select a random theme from a list | # then provide a list that is delimited by /: to the GraphicalThemes key and | # set GraphicalThemeRand to true. Otherwise use GraphicalTheme and specify | # just one theme. | #GraphicalTheme=circles | GraphicalTheme=gnu-linux | GraphicalThemes=circles/:happygnome/:ayo/:bijou/:crystal/:debblue/:glassfoot/:hantzley/:industrial/:debian | GraphicalThemeDir=/usr/share/gdm/themes/ | GraphicalThemeRand=false | # If InfoMsgFile points to a file, the greeter will display the contents of the | # file in a modal dialog box before the user is allowed to log in. | #InfoMsgFile= | # If InfoMsgFile is present then InfoMsgFont can be used to specify the font | # to be used when displaying the contents of the file. | #InfoMsgFont=Sans 24 | # If SoundOnLogin is true, then the greeter will beep when login is ready | # for user input. If SoundOnLogin is a file and the greeter finds the | # 'play' executable (see daemon/SoundProgram) it will play that file | # instead of just beeping | SoundOnLogin=true | #SoundOnLoginFile= | SoundOnLoginFile=/usr/share/sounds/bell.wav | # If SoundOnLoginSuccess, then the greeter will play a sound (as above) | # when a user successfully logs in | #SoundOnLoginSuccess=false | SoundOnLoginSuccess=true | #SoundOnLoginSuccessFile= | SoundOnLoginSuccessFile=/usr/share/sounds/jingling.wav | # If SoundOnLoginFailure, then the greeter will play a sound (as above) | # when a user fails to log in | #SoundOnLoginFailure=false | SoundOnLoginFailure=true | #SoundOnLoginFailureFile= | SoundOnLoginFailureFile=/usr/share/sounds/error.wav | | # The chooser is what's displayed when a user wants an indirect XDMCP | # session, or selects Run XDMCP chooser from the system menu | [chooser] | # Default image for hosts | #DefaultHostImg=/usr/share/pixmaps/nohost.png | # Directory with host images, they are named by the hosts: host or host.png | HostImageDir=/usr/share/hosts/ | # Time we scan for hosts (well only the time we tell the user we are | # scanning actually, we continue to listen even after this has | # expired) | #ScanTime=4 | # A comma separated lists of hosts to automatically add (if they answer to | # a query of course). You can use this to reach hosts that broadcast cannot | # reach. | Hosts= | # Broadcast a query to get all hosts on the current network that answer | Broadcast=true | # Set it to true if you want to send a multicast query to hosts. | Multicast=false | # It is an IPv6 multicast address.It is hardcoded here and will be replaced when | # officially registered xdmcp multicast address of TBD will be available | #Multicast_Addr=ff02::1 | # Allow adding random hosts to the list by typing in their names | #AllowAdd=true | | [debug] | # This will enable debugging into the syslog, usually not neccessary | # and it creates a LOT of spew of random stuff to the syslog. However it | # can be useful in determining when something is going very wrong. | Enable=false | | [servers] | # These are the standard servers. You can add as many you want here | # and they will always be started. Each line must start with a unique | # number and that will be the display number of that server. Usually just | # the 0 server is used. | 0=Standard | #1=Standard | # Note the VTAllocation and FirstVT keys on linux and freebsd. | # Don't add any vt<number> arguments if VTAllocation is on, and set FirstVT to | # be the first vt available that your gettys don't grab (gettys are usually | # dumb and grab even a vt that has already been taken). Using 7 will work | # pretty much for all linux distributions. VTAllocation is not currently | # implemented on anything but linux and freebsd. Feel free to send patches. | # X servers will just not get any extra arguments then. | # | # If you want to run an X terminal you could add an X server such as this | #0=Terminal -query serverhostname | # or for a chooser (optionally serverhostname could be localhost) | #0=Terminal -indirect serverhostname | # | # If you wish to run the XDMCP chooser on the local display use the following | # line | #0=Chooser | | ## Note: | # is your X server not listening to TCP requests? Perhaps you should look | # at the security/DisallowTCP setting! | | # Definition of the standard X server. | [server-Standard] | name=Standard server | command=/usr/bin/X -audit 0 -xkbdir /usr/share/X11/xkb | flexible=true | | # To use this server type you should add -query host or -indirect host | # to the command line | [server-Terminal] | name=Terminal server | # Add -terminate to make things behave more nicely | command=/usr/X11R6/bin/X -audit 0 -terminate | # Make this not appear in the flexible servers (we need extra params | # anyway, and terminate would be bad for xdmcp choosing). You can | # make a terminal server flexible, but not with an indirect query. | # If you need flexible indirect query server, then you must get rid | # of the -terminate and the only way to kill the flexible server will | # then be by Ctrl-Alt-Backspace | flexible=false | # Not local, we do not handle the logins for this X server | handled=false | | # To use this server type you should add -query host or -indirect host | # to the command line | [server-Chooser] | name=Chooser server | command=/usr/X11R6/bin/X -audit 0 | # Make this not appear in the flexible servers for now, but if you | # wish to allow a chooser server then make this true. This is the | # only way to make a flexible chooser server that behaves nicely. | flexible=false | # Run the chooser instead of the greeter. When the user chooses a | # machine they will get this same server but run with | # "-terminate -query hostname" | chooser=true `---- Andreas -- Don't relax! It's only your tension that's holding you together. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
