Hi NG, ich bin durch meinen lokalen Fernsehsender zum Umstieg auf DVB-T genötigt. Ich habe schon eine entsprechende PCI-Karte Technisat Airstar eingebaut. Wegen ihr bin ich auf den neuen Kernel 2.6.16 umgestiegen, da nur dieser den erforderlichen Treiber als Modul schon mitbringt. Ich möchte aber meine alte WinTV-Karte weiterverwenden zum Radioempfang. Leider bleibt die TV-Karte stumm. dmesg liefert zunächst unverdächtige Meldungen, dann erscheint folgendes:
bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 201 bt878_probe: card id=[0x13eb0070], Unknown card. Exiting.. ACPI: PCI interrupt for device 0000:00:0a.1 disabled bt878: probe of 0000:00:0a.1 failed with error -22 Ist es möglich, dass sich die Treiber gegenseitig bebindern? Mit den Kerneln 2.4.27 und 2.6.8 kann ich problemlos Fernsehen (-hören), doch die binden ja die neue DVB-T Karte nicht ein. Ich habe schon alle möglichen Module ausprobiert, nichts geht. Auch wenn ich die DVB-Treibermodule entferne, erhalte ich mit 2.6.16 keinen Ton. Gruß Joachim Eikenbusch Anhang: lsmod Module Size Used by radeon 95904 1 drm 61972 2 radeon lp 10432 0 ipv6 217664 10 ext2 56648 2 mbcache 7652 1 ext2 nls_cp437 5600 9 vfat 11328 9 dm_mod 47892 0 dst_ca 11104 0 dst 19684 1 dst_ca tvmixer 5040 0 uart401 10628 0 sound 67632 1 uart401 ata_piix 9732 0 libata 52784 1 ata_piix autofs4 16644 0 nls_iso8859_1 3936 1 i2c_algo_pcf 5796 0 msdos 8704 0 fat 46588 2 vfat,msdos nls_iso8859_15 4512 8 tsdev 7200 0 mousedev 10368 2 hostap_pci 47664 0 hostap 99140 1 hostap_pci ieee80211_crypt 5312 1 hostap snd_bt87x 13256 1 sg 30300 0 snd_cmipci 30624 1 gameport 13480 1 snd_cmipci snd_pcm 74408 2 snd_bt87x,snd_cmipci snd_page_alloc 9800 2 snd_bt87x,snd_pcm snd_opl3_lib 9024 1 snd_cmipci snd_timer 20292 2 snd_pcm,snd_opl3_lib snd_hwdep 8516 1 snd_opl3_lib snd_mpu401_uart 6592 1 snd_cmipci snd_rawmidi 22048 1 snd_mpu401_uart snd_seq_device 8236 2 snd_opl3_lib,snd_rawmidi bt878 10364 1 dst snd 46080 13 snd_bt87x,snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart, snd_rawmidi,snd_seq_device orinoco_pci 6528 0 tuner 44876 0 evdev 8736 0 tvaudio 22012 0 orinoco 34452 1 orinoco_pci b2c2_flexcop_pci 7864 0 b2c2_flexcop 24236 1 b2c2_flexcop_pci mt352 5668 1 b2c2_flexcop mt312 6916 1 b2c2_flexcop bcm3510 8516 1 b2c2_flexcop stv0299 9672 1 b2c2_flexcop dvb_core 70112 3 dst_ca,b2c2_flexcop,stv0299 stv0297 6656 1 b2c2_flexcop nxt200x 11652 1 b2c2_flexcop dvb_pll 11140 2 b2c2_flexcop,nxt200x soundcore 8672 3 tvmixer,sound,snd msp3400 27616 0 hermes 7136 2 orinoco_pci,orinoco shpchp 39200 0 pci_hotplug 24180 1 shpchp lgdt330x 7036 1 b2c2_flexcop i2c_sis96x 5028 0 bttv 157340 1 bt878 video_buf 19972 1 bttv firmware_class 9472 4 b2c2_flexcop,bcm3510,nxt200x,bttv compat_ioctl32 1184 1 bttv i2c_algo_bit 8136 1 bttv v4l2_common 7360 3 tuner,msp3400,bttv btcx_risc 4520 1 bttv ir_common 9156 1 bttv tveeprom 13520 1 bttv videodev 8640 1 bttv i2c_core 19312 18 dst,tvmixer,i2c_algo_pcf,tuner,tvaudio,b2c2_flexcop,mt352,mt312,bcm3510, stv0299,stv0297,nxt200x,msp3400 ,lgdt330x,i2c_sis96x,bttv,i2c_algo_bit,tveeprom parport_pc 31472 1 parport 31720 2 lp,parport_pc floppy 55628 0 sis_agp 8164 1 agpgart 29232 2 drm,sis_agp psmouse 34248 0 serio_raw 6436 0 rtc 11252 0 pcspkr 2948 0 reiserfs 216784 1 ide_cd 35328 0 cdrom 31888 1 ide_cd ide_disk 14528 15 generic 4164 0 [permanent] usb_storage 69312 0 sd_mod 16208 0 sis5513 11980 0 [permanent] ide_core 111440 5 ide_cd,ide_disk,generic,usb_storage,sis5513 ohci_hcd 17252 0 usbcore 110560 3 usb_storage,ohci_hcd tmscsim 19232 0 scsi_mod 122220 5 libata,sg,usb_storage,sd_mod,tmscsim 3c59x 39848 0 mii 5056 1 3c59x thermal 13000 0 processor 21376 1 thermal fan 4452 0 Kernel-Meldungen zu den TV-Kartentreibern: Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 201 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 201, latency: 32, mmio: 0xee800000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 0-0050: Hauppauge model 44354, rev B121, serial# 2122426 tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 0-0050: audio processor is MSP3415 (idx 6) tveeprom 0-0050: has radio bttv0: Hauppauge eeprom indicates model#44354 bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-sis96x version 1.0.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 msp3400 0-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) msp3400 0-0040: MSP3415D-B3 supports nicam, mode is autodetect bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully orinoco 0.15rc3 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .<7>orinoco_pci 0.15rc3 (Pavel Roskin <[EMAIL PROTECTED]>, David Gibson <[EMAIL PROTECTED]> & Jean Tourrilhes <[EMAIL PROTECTED]>) . ok sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 2 ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 209 DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: MAC address = 00:d0:d7:0a:35:92 b2c2-flexcop: i2c master_xfer failed bt878: AUDIO driver version 0.0.0 loaded Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. 0:0:5:0: Attached scsi generic sg0 type 6 sd 0:0:6:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: Attached scsi generic sg2 type 0 sd 1:0:0:1: Attached scsi generic sg3 type 0 sd 1:0:0:2: Attached scsi generic sg4 type 0 sd 1:0:0:3: Attached scsi generic sg5 type 0 b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: found the mt352 at i2c address: 0x0f DVB: registering frontend 0 (Zarlink MT352 DVB-T)... b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 201 bt878_probe: card id=[0x13eb0070], Unknown card. Exiting.. ACPI: PCI interrupt for device 0000:00:0a.1 disabled bt878: probe of 0000:00:0a.1 failed with error -22 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 177 orinoco_pci: Detected device 0000:00:09.0, mem:0xef000000-0xef000fff, irq 177 eth1: Hardware identity 8013:0000:0001:0000 eth1: Station identity 001f:0009:0001:0004 eth1: Firmware determined as Intersil 1.4.9 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:04:75:BB:8D:ED eth1: Station name "Prism I" eth1: ready ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 177 ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 18 (level, low) -> IRQ 201 ieee80211_crypt: registered algorithm 'NULL' hostap_pci: 0.4.4-kernel (Jouni Malinen <[EMAIL PROTECTED]>) mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output Adding 498920k swap on /dev/hda5. Priority:-1 extents:1 across:498920k libata version 1.20 loaded. tvmixer: MSP3415D-B3 (bt878 #0 [sw]) registered with minor 0 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: [EMAIL PROTECTED] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 177 NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver lp0: using parport0 (interrupt-driven). eth0: no IPv6 routers present [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185 [drm] Initialized radeon 1.22.0 20051229 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Loading R200 Microcode tvmixer: unregistered (#2) i2c /dev entries driver i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips rtc8564: cant init ctrl1 i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips msp3400 0-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) msp3400 0-0040: MSP3415D-B3 supports nicam, mode is autodetect tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
