ja hallo erstmal,.. Am Freitag, 18. August 2006 14:40 schrieb Dirk Ullrich: > Das gibt es massig mögliche Ursachen. Um sich erstmal einen Überblick > zu verschaffen: > (1) Was hast Du sonst an PCI-Ressourcen? > (Was gibt z.B. "lspci" aus?)
00:00.0 Host bridge: Intel Corporation 955X Express Memory Controller Hub (rev 81) 00:01.0 PCI bridge: Intel Corporation 955X Express PCI Express Root Port (rev 81) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE] 02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge A (rev 09) 02:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev 09) 03:07.0 Ethernet controller: D-Link System Inc DL2000-based Gigabit Ethernet (rev 07) 04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller > (2) Wie ist / sind Deine Netzwerkkarte / -karten konfiguriert? > (Inhalt von "/etc/network/interfaces") # The loopback network interface auto lo eth0 eth1 iface lo inet loopback # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp iface eth1 inet static address 192.168.1.204 netmask 255.255.224.0 broadcast 192.168.32.255 gateway 192.168.1.253 iface eth0 inet static address 192.168.100.204 netmask 255.255.255.0 # broadcast 192.168.32.255 # gateway 192.168.1.253 (eth0 ist die Inboard Intel-GBit, eth1, die D-Link LWL. Je nach dem, was ich gerade teste, kommentiere) Keep smiling yanosz