Hallo zusammen, > Und wie genau aeussert sich jetzt Dein Problem?
Hier mal der Output bei K3B: -----%<----- System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.5 QT Version: 3.3.7 Kernel: 2.6.18-2-k7 Devices ----------------------- HL-DT-ST DVD+-RW GWA4040N B107 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-Rom; DVD-Rom; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-Rom; DVD-R Sequentiell; DVD-RW Eingeschränktes Überbrennen; DVD-RW Sequentiell; DVD+RW; DVD+R; CD-Rom; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Eingeschränktes Überschreiben] K3b ----------------------- Size of filesystem calculated: 357879 Used versions ----------------------- cdrecord: 1.0pre1 cdrecord ----------------------- This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to [EMAIL PROTECTED], don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling WARNING WARNING WARNING: If you are annoyed by the messages below about unofficial status or about non-Schily-Makefilesystem or if your GUI/script breaks because of them, please don't send your complaints to cdrkit maintainers; they already know. They are not allowed to remove them by Joerg Schilling's license modifications (restrictions), hidden in the source. Correcting the contents of the messages is forbidden as well, so don't believe everything said there. See http://svn.debian.org/wsvn/debburn/nonameyet/trunk/FAQ?op=file&rev=0&sc=0 for details. /usr/bin/X11/wodim: Operation not permitted. WARNING: Cannot set RR-scheduler /usr/bin/X11/wodim: Permission denied. WARNING: Cannot set priority using setpriority(). /usr/bin/X11/wodim: WARNING: This causes a high risk for buffer underruns. scsidev: 'ATAPI:/dev/hdc' devname: 'ATAPI:/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: This version of libscg has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Warning: Cannot gain SYS_RAWIO capability: Operation not permitted Possible reason: wodim not installed SUID root. /usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). /usr/bin/X11/wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-ata.c-1.7 '@(#)scsi-linux-ata.c 1.7 04/06/12 Copyright 2002 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 1.0pre1 (HOST_CPU-just-a-fake-string-to-make-Schilling's-invariant-section-compile-because-cdrkit-does-not-need-it-anymore-HOST_VENDOR-just-a-fake-string-to-make-Schilling's-invariant-section-compile-because-cdrkit-does-not-need-it-anymore-Linux) Copyright (C) 1995-2006 Jörg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. Warning: This version of cdrecord has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. TOC Type: 1 = CD-ROM Using libscg version 'debburn project-0.8ubuntu1+debburn1'. Driveropts: 'burnproof' atapi: 1 Device type : Removable CD-ROM Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVD+-RW GWA4040N' Revision : 'B107' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: Drive buf size : 1308672 = 1278 KB Drive DMA Speed: 104051 kB/s 591x CD 75x DVD FIFO size : 4194304 = 4096 KB /usr/bin/X11/wodim: Drive does not support SAO recording. /usr/bin/X11/wodim: Illegal write mode for this drive. cdrecord command: ----------------------- /usr/bin/X11/wodim -v gracetime=2 dev=ATAPI:/dev/hdc speed=16 -dao driveropts=burnproof -eject -overburn -data -tsize=357879s - mkisofs ----------------------- 357879 I: -input-charset not specified, using ISO-8859-1 (detected in locale settings) mkisofs command: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid JLF - echte Freunde finden -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-tobias/k3bWLMntc.tmp -rational-rock -hide-list /tmp/kde-tobias/k3br4TpWa.tmp -joliet -hide-joliet-list /tmp/kde-tobias/k3bJGbRsa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-tobias/k3bdwbg8a.tmp -----%<----- > Benutzt Du udev? Ja. Grüßle, Tobias -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)